Handleiding Zibro SRE 237 E Kachel

Handleiding

J THE CORRECT USE OF 'SAVE'

The 'SAVE' function allows you to limit the temperature. When this function is

activated, the heater will automatically switch off, when the room temperature

exceeds the set temperature by 3°C. Subsequently, when the room temperature has

dropped again to the set temperature, the heater will automatically switch on again.

Activate the 'SAVE' setting by pressing the appropriate  key. will display on the

information display (Fig. J). Switch off the function by pressing the SAVE key once again.

Without the 'SAVE' setting your heater will maintain the set temperature by

approximation as well, by adjusting its heating capacity. 'SAVE' is an economy

setting, which you can use when, for instance, you are not present in the room

or to keep it frost-free.

K THE 'FUEL' INDICATOR

When the FUEL indicator appears, it means that there is only fuel left for 10 more

minutes. The count-down of the remaining heating time can be seen in the

information display  (Fig. K). Now you have two options:

 you remove the fuel tank and refill it outside the living room (section B) or

 you push the button EXTENSION . By pushing this button, the remaining

heating time will extend to 90 minutes. The heater will automatically switch

back to its lowest position. In the display the number 90 will appear, which

will decline to 10. At the arrival of 10, you will hear an alarm signal every two

minutes, warning you to refill the removable tank. If you do not react, the

heater will extinguish by itself. The heater will also sound a warning signal,

when it switches off. The fuel indicator will blink, while four lines (--:--)

are blinking in the information display. You can stop this by pressing the

button  once more.

Once the heater has used up all its fuel and extinguished, it will take some time,

after the refill, before the heater is completely ready for use again.

L THE 'VENT' INDICATOR

When there is insufficient ventilation in the room, an intermittent buzzer will be

heard (approximately once each 30 seconds) and the VENT indicator will be

blinking. When this signal is given, ensure that the ventilation of the room is

improved (e.g. by opening a door or window a little more), to avoid that the heater

shuts off. When the ventilation of the room is improved, the VENT indicator and

buzzer will be deactivated. When there is still insufficient ventilation, the heater

shuts off automatically. When this occurs, e- 1 1 is displayed and the indicator is

blinking and VENT indicator ( ) is lit. After improving the ventilation of the room

(e.g. by opening a door or window a little more), the heater can be ignited by

pushing



again.

M MAINTENANCE

Switch off the heater and let it cool down, before you start any maintenance

work. Also disconnect the plug from the mains. Your Zibro needs hardly any

maintenance. It is, however, important that you clean the air filter  and the vent

filter  with a vacuum cleaner and the grid  with a damp cloth, both on a

weekly basis. Remove the air filter cap occasionally (Fig. M) and clean it with soapy

water. Prior to reinstallation, make sure that the air filter cap has fully dried.

Regularly inspect the fuel filter as well:

Remove the removable tank  from the heater and remove the fuel filter

(Fig. N). Some drops may leak from the filter; keep a cloth at hand.

1

4

57

L: A blinking

indicator light is a sign

that you need extra

ventilation.

K: When the FUEL

indicator has appeard,

the information display

will show the number of

minutes of fuel left in

the tank.

☞

J: When the SAVE

function is activated, the

heater will automatically

switch on or off in order

to remain within a

specified temperature

range.

M

Fuel filter

N

man_SRE237E_uk.qxd:uk 24-05-11 15:56 Page 59

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Zibro SRE 237 E Kachel. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Zibro. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Zibro SRE 237 E Kachel in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Zibro Kachels
Meer handleidingen voor Kachels

Veelgestelde vragen over Zibro SRE 237 E Kachel

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Zibro RCA 68 Kachel

Handleiding

Zibro EPH 1800 LCD Kachel

Handleiding

Zibro R 545 C Kachel

Handleiding

Zibro R 617 E Kachel

Handleiding

Zibro R 24 TC Kachel

Handleiding

Zibro RS 22 Kachel

Handleiding

Zibro LC 400 Kachel

Handleiding

Zibro R 56 C Kachel

Gerelateerde categorieën