DO NOT subject the device to extreme temperatures or variaons in temperature.
Avoid heavy impact or falling of the device.
DO NOT use the string on sharp edges.
DO NOT expose the device to connuous vibraon.
DO NOT expose the device to extremely hot or cold temperatures.
Always store the device indoors.
Always keep the device free of dust, water, and direct sunlight.
Clean the tool with a damp cloth.
DO NOT disassemble or modify the device in any way.
DO NOT aempt to change any part of the laser lens.
Full discharge of the baery can reset the Real Time Clock (RTC) and cause me inaccuracy.
String mode accuracy can be influenced by the speed of pull and retracon.
Avoid pulling the string too quickly or completely leng it go to ensure
maximum accuracy. Pulling the string no faster than 50cm/s (20in/s) and retracng
no faster than 10m/s (4in/s) is required for accuracy.
When you retract the string too quickly, Bagel will display "!", nofying
that the measurement may be out of its accuracy range. In this case, you can
press the
MODE/SETTINGS BUTTON to reset Bagel's measurement to zero.
In string mode, the digital display may somemes malfuncon due to string
tension affecng Bagel's sensor. This is a temporary glitch and you can fix it
by restarng the device.
Read all instrucons. Failure to follow all instrucons listed below may result in
hazardous radiaon exposure, electric shock, fire, choking and/or serious injury.
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiaon exposure.
Have the device repaired only through qualified specialist using original spare parts.
This ensures that the safety of the device is maintained.
DO NOT use this device
for any purpose other than those outlined in this manual.
DO NOT leave the device “ON” unaended in any normal operang mode.
DO NOT disassemble the device. There are no user serviceable parts inside.
Disassembling the device will void all warranes on the device.
DO NOT modify the device in any way. Modifying the device may result in
hazardous laser radiaon exposure.
Bagel Labs (“Seller”) warrants to the original purchaser only, that Bag
el Smart
Tape Measure will be free from defects in material or workmanship for a period of
one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited
Warranty and, to the extent permied by law, any warranty or condion implied
by law, shall be the repair of replacement of parts, without charge, which are
defecve in material or workmanship and which have not been misused, careles
sly
handled, or misrepaired by persons other than Seller or Authorized Service Center.
To make a claim under this Limited Warranty, you must return the complete Bagel
Smart Tape Measure, transportaon prepaid, to any Seller’s Factory Service
Center or Authorized Service Center. Please include a dated proof of purchase
with your tool. For locaons of service centers visit hp://www.bagel-labs.com.
THIS LIMITED WARRANTY DOES NOT APPLY TO OTHER ACCESSORY ITEMS AND
RE
LATED ITEMS.
FCC ID : 2AJ8I-BAGEL001
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protecon against
harmful interference in a residenal installaon. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instrucons, it may cause
harmful interference to radio communicaons. However, there is no guarantee that interference will
not occur in a parcular installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by tuning the equipment off and on, the user is encouraged
to try and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the distance between the equipment and the receiver.
- Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modificaons (including on the antenna) not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
LASER CLASSIFICATION:
This device produces visible laser beams, which are emied from the instrument:
It is a Class 2 laser product in accordance with EN 60825-1: 2007 “Safety of Laser Product”.
Laser Class2 Products:
Do not stare into the laser beam or direct it towards other people unnecessarily.
Eye protecon is normally afforded by aversion responses including the blink reflex.
NEVER aim the beams at a workplace with a reflecve surface. Bright shiny
reflecve sheet steel or similar reflecve surfaces are not recommended for laser use.
Reflecve surfaces could direct the beams back towards the operator.
DO NOT allow children to use the device without supervision.
The string can cause strangulaon and children could unintenonally blind other persons.
The use of opcal instruments with this device will increase eye hazards.
Praat mee over dit product
Laat hier weten wat jij vindt van de Bagel Smart Rolmaat. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.