Handleiding Barska AX11650 Kluis

Handleiding

See reverse side for more information

10/12

BC266

User’s Manual for Biometric Safe

* Actual model may vary

A. Initialization Button

B. Battery Compartment

C. Bolts

D. Fingerprint Scanner

E. Indicator Lights

F. Wake-Up Button

GETTING STARTED

1. Remove Emergency Keys from accessory package

2. To expose the Emergency Key access, remove Logo Plate

(G) screws with provided tool

3. Insert Emergency Key into key access, push and turn

counter-clockwise

4. Turn Handle (H) clockwise to open the safe

5. Continue with INSTALL BATTERIES

INSTALL BATTERIES

1. Remove Battery Compartment (B) cover

2. Insert 4 AA batteries and restore battery cover

3. Continue with FINGERPRITN REGISTRATION

FINGERPRINT REGISTRATION

IMPORTANT: The safe is in either Pre-registered mode or

Factory Default mode, test safe to determine factory settings

below

Pre-registered mode: Safe can NOT be opened with any

fingerprint(s)

Factory Default mode: Safe can be opened with ANY

fingerprint(s)

1. With the safe door open, press and release Initialization

Button (A)

2. Immediately place a finger on the Fingerprint Scanner (D)

- Hold finger still

- 1 beep will be heard recognizing the fingerprint; followed by

2 consecutive beeps

- Remove finger

- Registration is complete

Successful Registration

Registration is successful when a total of 3 beeps are heard

Unsuccessful Registration

2 short beeps will be heard; repeat registration process again

3. To register another fingerprint - repeat steps 1 – 2

4. Continue with TEST (NON) REGISTERED FINGERPRINTS

TEST (NON) REGISTERED FINGERPRINTS

1. Test multiple Non-Registered fingerprints

- Close safe door, turn Handle (H) counter-clockwise to

lock the safe

- Press and release Wake-Up Button (F)

- Place a non-registered finger on the Fingerprint Scanner (D)

- Turn Handle (H) clockwise, the door should not open

- If the door opens with a non-registered fingerprint,

registration was unsuccessful; the safe is still in Factory

Default mode

- Repeat steps under FINGERPRINT REGISTRATION, and

test multiple non-registered fingerprints

2. Test a Registered fingerprint

- With door closed, press and release Wake-Up Button (F)

- Place a registered finger on the Fingerprint Scanner (D)

- Turn Handle (H) clockwise, the door should open

- Registration was successful, if it only opened with registered

fingerprint(s)

CLOSE/OPEN SAFE DOOR

CLOSE: Close safe door, turn Handle (H) counter-clockwise to

lock the safe

OPEN: Press and release Wake-Up Button (F)

- Place a registered finger on Fingerprint Scanner (D)

- Turn Handle (H) clockwise to open the safe

BEEP SOUND OPTIONS

Beep OFF: Press and HOLD the Initialization Button (A) (20 -

30 seconds) until the Indicator Lights (E) flash green once

- RELEASE the Initialization Button

Beep ON: Press and HOLD the Initialization Button (A) (20 -

30 seconds) until the Indicator Lights (E) flash green, followed

by 1 beep

- RELEASE the Initialization Button

OPEN SAFE WITH EMERGENCY KEY

1. To expose the Emergency Key access, remove Logo

Plate (G) screws with provided tool

2. Insert Emergency Key into key access, push and turn key

counter-clockwise, and turn Handle (H) clockwise to open

the safe

NOTE: Store Emergency Keys in a secure place, NOT inside of

the safe

OPEN SAFE WITH EXTERNAL BATTERY PACK

Use this option when internal batteries are low

1. Insert 4 AA batteries into External Battery Pack (I)

2. Plug into External Battery Access (J)

G. Logo Plate and Emergency

Key Access

H. Handle

I. External Battery Pack

(batteries not included)

J. External Battery Access

WARNING

- New Safe is in either Pre-registered mode or Factory

Default mode; ANY fingerprint can open the safe. Only

a successfully registered Fingerprint(s) can terminate

Factory Default mode.

- Register at least two different fingerprints and test a

few times before closing the safe door.

- Test with a non-registered fingerprint. If the safe

opens, the safe is still in Factory Default mode.

- Avoid leaving safe door open and unattended; it will

allow unauthorized individuals to add their fingerprints

and/or reprogram the safe, gaining full access to the

safe and the contents.

- Test the Emergency Keys and store them in a secure

place, NOT inside of the safe.

- To maximize the security and performance of the

safe, test registered fingerprints every 6 months.

- Initialization button cover must be restored after

every use.

- If user resets the safe to Factory Default mode: ANY

fingerprint can open the safe.

A

B

C

F

D

E

G

HH

HJ

I

L

o

c

k

U

n

l

o

c

k

Read all instructions before using this safe.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Barska AX11650 Kluis. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Barska. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Barska AX11650 Kluis in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Barska Kluizen
Meer handleidingen voor Kluizen

Veelgestelde vragen over Barska AX11650 Kluis

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Barska AX11930 Kluis

Handleiding

Barska CB11828 Kluis

Handleiding

Barska AX11898 Kluis

Handleiding

Barska AX11822 Kluis

Handleiding

Barska AX11644 Kluis

Handleiding

Barska CB12774 Kluis

Handleiding

Barska AX13370 Kluis

Handleiding

Barska CB11790 Kluis

Gerelateerde categorieën