6
WWW.BBTA.COM.AU BBT-TILL-6.5HPBS
SAFETY DECALS
WHEELS ACT AS BRAKES
• NEVER start or operate tiller with wheels in the
FREE-WHEEL position. Make sure wheel lockouts
are engaged through wheel hubs and axle.
• Wheels act as brakes to keep the tiller at a
controlled speed. Disengage wheel lockouts ONLY
when engine is stopped.
WARNING
AVOID INJURY FROM ROTATING TYNES!
• Keep hands, feet and clothing away.
• Tynes rotate when tiller is engaged in forward or
reverse.
• Tynes and wheels rotate when drive control levers
are pulled down
• In reverse, tynes and wheels rotate when the
reverse handle is pulled back towards the operator.
• Releasing the drive control levers to reutral stops
the wheels and times.
DANGER
Although reading this manual and the safety instructions it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effectively, we have placed several safety labels on the tiller to
remind you of this important information while you are operating the unit.
These important safety labels are illustrated below, and are shown here to help familiarize you with the location
and content of the safety messages you will see as you perform normal tilling operations.
Please review these labels, and if you have any questions regarding their meaning or how to comply with these
instructions, reread the complete safety instruction text on the preceding pages. These labels are easily applied,
and will act as a constant visual reminder to you, and others who may use the equipment, follow the safety
instructions for safe, effective operation of your BBT Commercial Cultivator Tiller.
REMEMBER: If the safety decals have been damaged, removed, become illegible or parts have been replaced
without decals, new safety decals must be applied.
OPERATION
REFER TO OWNER’S MANUAL FOR DETAILED
OPERATING INSTRUCTIONS
TO START:
1. Release drive control levers to neutral position.
2. Lower the drag stake so that tynes do not touch the
ground.
3. Check position of wheels and wheel lockouts.
4. Slide choke control to choke position.
5. Move throttle control lever to the fast position.
6. Pull starter rope.
Avoid Serious Injury
• Read Owner’s Manual(s) before operating.
• Know the locations and function of all controls.
• Keep all shields and guards in place and working
while running.
• NEVER allow children to operate tiller.
• Dress appropriately. Wear sturdy footwear.
• Carefully inspect area to be tilled. Remove large
rocks and other foreign objects. DO NOT till above
underground electricity, water, gas or other utility
lines and pipes. STOP THE ENGINE AND DISCONNECT
THE SPARK PLUG WIRE before removing debris or
servicing unit.
• When leaving the operating position for any reason:
• Shut off the ngine.
• Wait for all moving parts to stop.
WARNING
• DO NOT START ENGINE UNLESS BELT COVER IS
ATTACHED.
• KEEP HANDS, FEET AND CLOTHING AWAY FROM
MOVING BELTS AND PULLEYS.
• FAILURE TO COMPLY COULD RESULT IN INJURY
• SEE OWNER’S MANUAL FOR FULL SAFETY
INSTRUCTIONS.
WARNING
Praat mee over dit product
Laat hier weten wat jij vindt van de BBT BBT-TILL-6.5HPBS Cultivator. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.