Handleiding Big Agnes Slater UL3+ Tent

Handleiding

Cut here to remove. Do Not Tear!

SLATER UL 3+ SET UP INSTRUCTIONS

1. Remove contents from stu sack. Spread tent body out on ground.

2. Assemble the poles. One single pole and one with two hubs. Be careful to insert

each pole section into the next by hand instead of allowing the shock cord to

snap them together to ensure each pole section is fully seated.

3. Lay the assembled pole set with hubs on top of the body aligning the shorter

pole sections from the hub that forms the smaller “v” to correspond to the

foot (narrower end) of the tent. The larger “v” section corresponds to the head

(larger end with door) of the tent.

4. Insert the pole tips of the narrower “v” into the grommets of the silver webbing

at the foot of the tent and the pole tips of the wider “v” into the grommets of

the black webbing.

5. Attach the “H Clip” to the underside of the “PC Swivel H”.

6. Attach all “Twist Clips” to the pole.

7. Using the short pole section with blunt ends that is attached to the ridge pole,

insert one end into the webbing pocket that is coming o side of the tent body.

Repeat on other side

8. Stake out the four corners

9. Drape the rainy over the tent aligning the silver and black webbing of the tent

body to the silver and black webbing of the y.

10. Make sure the webbing at the corners of the rainy is completely slackened.

Attach the buckles on the rainy to those on the tent body.

11. Feed the remaining single pole through the sleeve on the big vestibule on the

underside of the y and insert the tips in the grommet holes of the black web-

bing strap.

12. Stake out the vestibules.

13. Evenly tension the webbing on each corner as needed to keep the rainy taut.

14. Stake out all guylines.

Separate 6”, large diameter pole segment included for emergency eld repair.

Slide repair pole over the break to act as a splint.

FAST FLY SET UP INSTRUCTIONS

If you purchase the optional Big Agnes footprint for your Slater tent it will enable

you to pitch a shelter while leaving the tent body behind. The Fast Fly conguration

requires the footprint, rainy, poles and stakes.

1. Lay the footprint on the ground and stake out. Take note that front of the foot-

print is wider than the rear.

2. Assemble the pole. Notice that where the two pole sections come o the hub

that one end is wider than the other end.

3. Lay the assembled pole set with hubs on top of the body aligning the shorter

pole sections from the hub, that form the smaller “v” correspond to the foot

(narrower end) of the footprint. The larger “v” section corresponds to the head

of the footprint.

4. Insert the pole tips of the narrower “v” into the grommets of the silver webbing

at the foot of the footprint and the pole tips of the wider “v” into the grommets

of the black webbing.

5. Drape the rainy over the pole structure aligning the silver and black webbing

of the y to the silver and black webbing of the footprint.

6. Make sure the webbing at the corners of the rainy is completely slackened.

Attach the buckles on the rainy to those on the footprint.

7. Feed the remaining single pole through the sleeve on the big vestibule on the

underside of the y and insert the tips in the grommet holes of the black web-

bing strap.

8. To keep the top sides of the tent taut, climb inside the tent and align the short

pole with the blunt ends so that the blunt ends touch the sides of the tent.

9. Stake out the vestibules.

10. Evenly tension the webbing on each corner as needed to keep the rainy taut.

11. Stake out all guylines.

Slater UL3+

Tent with Fly

and Tent

Hardware:

H Clip Twist ClipPC Swivel H

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Big Agnes Slater UL3+ Tent. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Big Agnes. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Big Agnes Slater UL3+ Tent in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Big Agnes Tenten
Meer handleidingen voor Tenten

Veelgestelde vragen over Big Agnes Slater UL3+ Tent

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.