Handleiding Boss GT-1 Effectpedaal

Handleiding

2

DC IN jack

This jack is for connecting

an AC adaptor (BOSS PSA

series; sold separately).

Use only the specied AC

adaptor (PSA series), and

connect it to an AC outlet

of the correct voltage.

Do not use any other AC

adaptor, since this may cause

malfunction.

Getting Ready

Connecting the Equipment

USB COMPUTER port

Use a USB cable

to connect to a

computer and

exchange audio

data between

the GT-1 and the

computer (p. 8).

AUX IN jack

Use a stereo-mini plug to

connect your audio player.

Use your audio player’s volume

control to control the volume of

OUTPUT jacks and PHONES jack.

OUTPUT jack

Connect these to your guitar amp or

mixer. If using a mono connection,

use only the L/MONO jack.

INPUT jack

Connect your guitar. The INPUT jack doubles as the power

switch. Power to the unit is turned on when you plug into

the INPUT jack; the power is turned o when the cable is

unplugged.

PHONES jack

You can connect a set of

headphones here.

* Before turning the unit on/o, always be sure to turn the volume

down. Even with the volume turned down, you might hear some

sound when switching the unit on/o. However, this is normal and

does not indicate a malfunction.

Installing the Batteries

Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the unit.

* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit

carefully; do not drop it.

* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of the

items related to batteries that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet “USING THE

UNIT SAFELY” and Owner’s manual (p. 12)).

* We recommend that you keep batteries installed in the unit even though you’ll be powering it with the AC adaptor. That

way, you’ll be able to continue a performance even if the cord of the AC adaptor gets accidentally disconnected from the

unit.

* To prevent malfunctions or accidents, install or replace the batteries before connecting the unit to other equipment.

* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.

* To prevent malfunction and equipment failure, always turn down the

volume, and turn o all the units before making any connections.

CTL2, 3/EXP2 jacks (Connecting to External Pedals)

You can control various parameters by connecting an expression pedal

(Roland EV-5: sold separately) or a footswitch (FS-5U, FS-6, FS-7: sold

separately).

For details on the settings, refer to “Settings for CTL1, EXP1, and an External

Pedal” (p. 9).

Turn down the volume of the

connected device

1

Connect your guitar

3

Connect your equipment to the

OUTPUT jack(s)

2

Turn on the power of the

amp(s)

4

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Boss GT-1 Effectpedaal. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Boss. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Boss GT-1 Effectpedaal in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Boss Effectpedalen
Meer handleidingen voor Effectpedalen

Gerelateerde producten

Handleiding

DigiTech BP90 Effectpedaal

Handleiding

Zoom A1 Four Effectpedaal

Handleiding

DigiTech Hyper Phase Effectpedaal

Handleiding

Zoom A1X Four Effectpedaal

Handleiding

DOD FX20 Effectpedaal

Gerelateerde categorieën