Handleiding Casio G-Shock GA-1100-1AER Horloge

Handleiding

E-16

Confi guring Current Time and Date Settings

You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.

Changing the digital Home City data should cause the analog time setting to change accordingly. If the

analog time does not indicate the digital time, check the home positions of the hands and make

adjustments if necessary (page E-19).

To change the current time and date settings

1. In the Timekeeping Mode, hold down

A

until

ADJ

appears in the

upper display.

• When you release

A

(after ADJ appears), city code will be fl ashing

in the upper display.

City codeCity code

E-17

2. Press

D

to move the fl ashing in the sequence shown below to select the other settings.

City Code DST

Illumination

Duration

Button Operation

Tone On/Off

Day Month

12/24-Hour

Format

Seconds Hour

Year

Minutes

• The following steps explain how to confi gure timekeeping settings only.

3. When the timekeeping setting you want to change is fl ashing, use

E

and/or

B

to change it as

described below.

Screen To do this: Do this:

Change the city code Use

E

(East) and

B

(West).

Toggle between daylight saving time (

ON

) and

standard time (

OFF

).

Press

E

.

Toggle between 12-hour (

12H

) and 24-hour (

24H

)

timekeeping.

Press

E

.

Reset the seconds to

00

(If the current seconds count is between 30 and 59,

one is added to the minute count).

Press

E

.

Change the hour or minutes

Use

E

(+) and

B

(–).

Change the year, month, or day

E-18

4. After all of the settings are the way you want, press

A

to exit the setting screen.

Note

• For information about selecting a Home City and confi guring the DST setting, see “Confi guring

Home City Settings” (page E-14).

• While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from

noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,

time is displayed from 0:00 to 23:59, without any P (PM) indicator.

• The watch’s built-in full automatic calendar makes allowances for different month lengths and leap

years. Once you set the date, there should be no reason to change it except after you have the

watch’s battery replaced.

• The day of the week changes automatically as the date and/or year changes. Make sure that your

date and year settings are correct.

• Refer to the pages shown below for more information on Timekeeping Mode settings.

- Button operation tone on/off: “To enable or disable the button operation tone” (page E-49)

- Illumination duration setting: “To change the illumination duration” (page E-45)

E-19

Hand Home Position Adjustment

Strong magnetism or impact can cause the hands of the watch to be off.

• Home position adjustment is not necessary when the analog time and digital time are the same time in

the Timekeeping Mode.

To adjust home positions

1. In the Timekeeping Mode, hold down

A

and keep it depressed for

about fi ve seconds until

H.SET

appears on the upper display.

• When you release

A

after H.SET appears, the second hand will

move to 12 o’clock. This indicates the second hand home position

adjustment mode.

• Though ADJ will appear in the upper display about two seconds

after you hold down

A

, do not release the button yet. Keep it

depressed until H.SET appears.

• Home position adjustment is performed in the following sequence:

second hand, current time hour and minute hand, World Time hour

and minute hand, mode hand.

2. Use

D

to select the hand (s) you want to adjust.

• The selected hand (s) will move to 12 o’clock, and the upper display and lower display will show

the information below.

Upper display Lower display Selected hand

H.SET

Flashing

00

Second hand

Flashing

0:00

Not displayed Hour and minute hands

Flashing

SUB

Flashing

1

World Time hour and minute hands

Flashing

SUB

Flashing

2

Mode dial hand

E-20

• If the selected hand does not move exactly to 12 o’clock, perform step 3 below to adjust it.

• The watch will return to regular timekeeping automatically if you do not perform any operation for

about two or three minutes. Any changes you have made to settings up to that point will be saved.

3. Use

E

(+) and

B

(–) to adjust the position of the currently selected hand.

• Holding down either button will cause the hand to move at high speed. Once started, high-speed

hand movement will continue even if you release the button. To stop high-speed hand movement,

press any button.

• The second hand and mode dial hand will automatically stop high-speed movement after they

complete one revolution. The minute hand will stop automatically after 12 revolutions.

4. Press

A

to exit home position correction and return to regular timekeeping.

Note

After performing home position adjustment, check to make sure that the analog hands and the upper

display indicate the same time. If they do not, perform home position adjustment again.

E-21

Using the Digital Compass

You can use the Digital Compass Mode to determine the direction of north, and to check your bearing to a

destination.

• For information about what you can do to improve digital compass reading accuracy, see “Calibrating

the Bearing Sensor” (page E-24) and “Digital Compass Precautions” (page E-29).

To perform a digital compass operation

1. Place the watch on a fl at surface. If you are wearing the watch, make sure that your wrist is horizontal

(in relation to the horizon).

2. Point the 12 o’clock position of the watch in the direction you want to check.

3. In any mode (except a setting mode), press

C

to perform a digital compass operation.

• This will cause the mode dial hand to move to COMP.

• After about two seconds, the second hand will point in the direction of magnetic north, and the

upper display will show the direction or the bearing angle that 12 o’clock is pointed.

• Press

A

to toggle the upper display between the direction and the bearing angle.

E-22

315°

0°

Objective Bearing Indication

Meaning

N: North

E: East

W: West

S: South

Bearing to Objective:

Northwest

Bearing Angle to

Objective

North

• See “Digital Compass Readings” (page E-23) for information about how direction readings are

indicated by the watch.

4. To return to the mode you were in immediately before entering the Digital Compass Mode, press

D

.

To enter the Timekeeping Mode, hold down

D

for at least two seconds.

E-23

Digital Compass Readings

• After the fi rst reading is obtained, the watch will continue to take digital compass readings automatically

for about one minute. After readings are complete, the watch will return to the mode you were in

immediately before entering the Digital Compass Mode.

• The auto light switch is disabled while a Digital Compass reading operation is in progress.

• The following table shows the meanings of each of the direction abbreviations that appear on the upper

display.

Direction Meaning Direction Meaning Direction Meaning Direction Meaning

N

North

NNE

North-

northeast

NE

Northeast

ENE

East-

northeast

E

East

ESE

East-

southeast

SE

Southeast

SSE

South-

southeast

S

South

SSW

South-

southwest

SW

Southwest

WSW

West-

southwest

W

West

WNW

West-

northwest

NW

Northwest

NNW

North-

northwest

• The margin of error for the angle value and the direction indicator is ±15 degrees while the watch is

horizontal (in relation to the horizon). If the indicated direction is northwest (

NW

) and 315 degrees, for

example, the actual direction can be anywhere from 300 to 330 degrees.

• Note that performing a digital compass operation while the watch is not horizontal (in relation to the

horizon) can result in large error.

• You can calibrate the bearing sensor if you suspect the direction reading is incorrect.

Operation Guide 5441

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GA-1100-1AER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GA-1100-1AER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Beoordeling

Veelgestelde vragen over Casio G-Shock GA-1100-1AER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Edifice EFS-S600D-1A4VEF Horloge

Handleiding

Casio Timeless Collection LW-203-8AVEF Horloge

Handleiding

Casio G-Shock GW-8230B-9AER Horloge

Handleiding

Casio A100WEGG-1AEF Horloge

Handleiding

Casio AQ-230GA-9DMQEF Horloge

Handleiding

Casio Edifice EFS-S540DB-1AEF Horloge

Handleiding

Casio G-Shock MTG-B3000BD-1A2ER Horloge

Handleiding

Casio Edifice EF-527D-1AVER Horloge

Gerelateerde categorieën