Handleiding Casio G-Shock GA-900E-1A3ER Horloge

Handleiding

Operation Guide 5637

Adjusting the Digital Time and Date Settings

Use the procedure below to adjust the digital time and date settings.

To configure the digital time and date settings

1. In the Timekeeping Mode, hold down A until the

flashing SET Hold indicator disappears from the

display and the currently selected city code flashes

on the display.

E-19

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A until the

flashing SET Hold indicator disappears from the

display and the currently selected city code flashes

on the display.

2. Press C to display the DST setting mode.

3. Press D to toggle between Daylight Saving Time

(ON) and Standard Time (OFF).

x Note that you cannot switch between daylight saving

time and standard time while UTC is selected as your

Home City.

4. After the setting is the way you want, press A to

return to the Timekeeping Mode.

x The DST indicator appears to indicate that Daylight

Saving Time is turned on.

DST indicator

E-18

3. After the setting is the way you want, press A to return to the Timekeeping

Mode.

Note

x You can check the city code and name (English) of your Home City by pressing A.

x After you specify a city code, the watch will use UTC* offsets in the World Time

Mode to calculate the current time for other time zones based on the current time

in your Home City.

* Coordinated Universal Time, the world-wide scientific standard of timekeeping.

The reference point for UTC is Greenwich, England.

E-17

Configuring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

To configure Home City settings

1. In the Timekeeping Mode, hold down A until the

flashing SET Hold indicator disappears from the

display and the currently selected city code flashes

on the display.

x This indicates the Home City setting mode.

2. Use D (+) and B (–) to scroll through city codes until

the one you want is displayed.

x For details about city codes, see the “City Code

Table” at the back of this manual.

x Holding down either button scrolls at high speed.

City Code

E-16

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

Hour

Second

Month-DayDay of week

Minute

PM indicator

Hour : Minute

Second

B

E-15

2. Holding down L again as you press C will cause the hands to return to their

normal positions (normal timekeeping).

Note

x Watch button functions are the same regardless of whether the hands are moved

out of the way or at their normal positions.

x Changing to another mode will cause the hands to move back to their normal

positions.

x The hands also will move back to their normal positions automatically if no

operation is performed for about one hour.

E-14

1. While holding down L, press C.

x This will cause the hour and minute hands to move to a location where they do

not block your view of the digital display.

Example: When the current time is 8:23

Flashes while the hands are moved out of the way.

E-13

General Functions (All Modes)

The functions and operations described in this section can be used in all modes.

Auto Return

If you do not perform any operation for about two or three minutes while configuring

settings (setting flashing on the digital display) in any mode, the watch will exit the

setting operation and return to normal display.

Scrolling

The B and D buttons are used on the setting mode to scroll through data on the

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

Moving the Hands Out of the Way for Better Viewing

You can use the procedure below to temporarily move the hour and minute hands

out of the way to better view what is on the display.

x This operation can be performed in any mode. In the case of a setting mode

(setting flashing on the screen), the hands will move out of the way automatically,

even if you do not perform the below operation.

E-12

C

Alarm Mode Stopwatch Mode

Countdown Timer Mode World Time Mode

C

C

C

E-11

x Press C to cycle between the modes as shown below.

x To return to the Timekeeping Mode from any other mode, hold down C for at

least two seconds.

Timekeeping Mode

C

B

Each time you press the B button, the display will

change as follows.

E-10

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GA-900E-1A3ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GA-900E-1A3ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio G-Shock GA-900E-1A3ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Casio Collection LWS-2200H-1AVEF Horloge

Handleiding

Casio Sheen SHE-3517D-2AUEF Horloge

Handleiding

Casio G-Shock GA-700BNR-1AER Horloge

Handleiding

Casio Collection W-219HD-1AVEF Horloge

Handleiding

Casio Collection WS-1400H-1AVEF Horloge

Handleiding

Casio Edifice EFR-574D-1AVUEF Horloge

Handleiding

Casio Edifice EFR-552L-5AVUEF Horloge

Handleiding

Casio G-Shock GPR-H1000-9ER Horloge

Gerelateerde categorieën