Handleiding Casio G-Shock GA-900E-1A3ER Horloge

Handleiding voor je Casio G-Shock GA-900E-1A3ER Horloge nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 7 veelgestelde vragen, 0 comments en heeft 0 stemmen. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

Operation Guide 5637
7. Press D to toggle the target alarm between on (On displayed) and off (OFF
displayed).
x The indicator TGT will be displayed in the Stopwatch Mode while the target
time is on.
8. After all the settings are the way you want, press A to exit the setting screen.
To use the target time alarm
1. Reset the stopwatch to all zeros and then press D.
This will cause TGT to flash on the display.
2. Now you can perform the same operations as those in the steps on page E-26.
(1) (2) (4)
(3)
Start Target time
E-29
To set a target time
1. Reset the stopwatch to all zeros.
2. Hold down A until the flashing SET Hold indicator
disappears from the display and the hour digit
starts to flash. Release A after the hour digit starts
to flash.
3. Use D (+) and B (–) to change the hour setting.
x Holding down either button scrolls at high speed.
x For a target time of 24 hours, set 00hours
00minutes.
4. Press C to switch to the minutes setting.
5. Use D (+) and B (–) to change the minutes setting.
x Holding down either button scrolls at high speed.
6. Press C to display the target time alarm on/off
setting.
Hours
Target Time operation in
progress
E-28
Note
x Once started, elapsed time measurement continues until you press D to stop
it, even if you change to a different mode and even if the stopwatch reaches the
elapsed time maximum limit.
Using the Target Time Alarm
You can set a target time in the range of one minute to 24 hours, in units of one
minute.
A beeper will sound for 10 seconds when the elapsed timing of the stopwatch
reaches the target time.
E-27
To perform an elapsed time operation
D
D D D B
Start Stop (Resume) (Stop) Reset
To pause at a split time
D
B B D B
Start Split
(SPL displayed)
Split release Stop Reset
To measure two finishes
D B D B B
Start Split
(SPL displayed)
First runner finishes.
Display time of first
runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Reset
E-26
2. Now you can perform the same operations as those shown on page E-26.
Entering from Another Mode (including the Timekeeping Mode)
Press C as many times as necessary to navigate to the Stopwatch Mode as shown
on page E-11.
x To enter from the Timekeeping Mode using this method, press C four times.
x This will display the stopwatch screen in the same status as it was the last time you
exited the Stopwatch Mode. However, if you exited with a split time displayed, the
split time operation will be released when you return.
E-25
To enter the Stopwatch Mode
You can enter the Stopwatch Mode using any one of the methods below.
Entering Directly from the Timekeeping Mode
If the stopwatch was reset to all zeros the last time you used it, a new elapsed time
operation will start as soon as you enter the Stopwatch Mode.
See page E-26 for information about measuring an elapsed time.
1. In the Timekeeping Mode, press D.
This will result in one of the following, depending on the status of the stopwatch the
last time you exited the Stopwatch Mode.
x If reset (stopped at 0:00 00"00): Timing starts.
One-press timing start from the Timekeeping Mode (direct timing start from the
Timekeeping Mode)
x If an ongoing timing operation is paused: Timing remains paused.
x If an ongoing timing operation is in progress*: Timing continues to be performed.
* An ongoing stopwatch timing operation continues even if you navigate to
another mode from the Stopwatch Mode.
E-24
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two finishes.
x The measurement range of the stopwatch is 23 hours, 59minutes, 59.99 seconds.
Elapsed time returns to zero automatically and timing continues from there when
the maximum limit is reached.
Seconds
Minutes
Hours
Minutes
1/100 Second
E-23
Note
x Resetting the seconds to 00 while the current count is in the range of 30 to
59causes the minutes to be increased by 1.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week changes automatically when the date changes.
E-22
3. When the timekeeping setting you want to change is flashing, perform the
operation described below.
Screen To do this: Do this:
Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping
Press D.
Reset the seconds to 00
Press D.
Change the hour or minute
Use D (+) and B (–) to
change these settings.
x Holding down either button
scrolls at high speed.
Change the year
Change the month or day
4. Press A to exit the setting mode.
E-21
2. Press C to move the flashing in the sequence shown below to select the other
settings.
Home City
(page E-16)
C
DST
(page E-18)
C
12/24-Hour Format
C
Seconds
C
C
Hour
C
Illumination Duration
(page E-46)
Minute
C
C
Button Operation Tone On/Off
(page E-51)
C
Day
C
Month
C
Year
E-20
Download de handleiding in het Nederlands en/of Engels (PDF, 0.36 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Casio G-Shock GA-900E-1A3ER Horloge vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Casio G-Shock GA-900E-1A3ER Horloge?
Ja Nee
Beoordeel dit product als eerste
0 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Casio G-Shock GA-900E-1A3ER Horloge. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GA-900E-1A3ER Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GA-900E-1A3ER Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Casio
Model G-Shock GA-900E-1A3ER
Categorie Horloges
Bestandstype PDF
Bestandsgrootte 0.36 MB

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio G-Shock GA-900E-1A3ER Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Er is een batterij in mijn apparaat gaan oxideren, kan ik het nog veilig gebruiken? Geverifieerd

Ja, het apparaat kan nog veilig gebruikt worden. Verwijder eerst de geoxideerde batterij. Doet dit niet met blote handen. Reinig daarna het batterijcompartiment met een wattenstaafje gedipt in azijn of citroensap. Laat het drogen en doe nieuwe batterijen in het apparaat.

Ik vind dit nuttig (782) Lees meer

Mijn mechanische horloge loopt te snel, wat kan ik doen? Geverifieerd

Het is mogelijk dat het horloge is beinvloed door een magnetisch veld. Dit kan worden verholpen door middel van demagnetisering door een professionele horlogemaker.

Ik vind dit nuttig (753) Lees meer

Waar staan AM en PM voor? Geverifieerd

AM staat voor Ante Meridiem en geeft aan dat het tijdstip voor het middaguur is. PM staat voor Post Meridiem en geeft aan dat het tijdstip na het middaguur is.

Ik vind dit nuttig (650) Lees meer

Wat is een 'Chronograph'? Geverifieerd

Een 'Chronograph' is letterlijk een 'tijdmeter'. Hier worden klokken en horloges bedoeld die de tijd weergeven en daarnaast ook de functie van een stopwatch hebben.

Ik vind dit nuttig (562) Lees meer

Wat is GMT Geverifieerd

GMT staat voor Greenwich Mean Time (en wordt soms UTC genoemd dat staat voor Coordinated Universal Time). Het is de tijd die geldt voor lengtegraad 0 die door Greenwich, in de buurt van Londen, loopt.

Ik vind dit nuttig (389) Lees meer

Wat is een quartz-uurwerk? Geverifieerd

Horloges en klokken met een quartz-uurwerk worden aangedreven door een batterij. Deze stuurt een stroom door quartz kristallen die hierdoor gaan trillen. Deze trillingen worden doorgegeven naar het uurwerk. Omdat deze trillingen een vaste frequentie hebben, zijn horloges en klokken met een quartz-uurwerk extreem precies.

Ik vind dit nuttig (386) Lees meer

Er zit condens onder het glas van mijn Casio horloge, wat moet ik doen? Geverifieerd

Casio geeft aan dat als de condens is onstaan door een extreme wisseling van temperatuur en relatief snel weer verdwijnt, er waarschijnlijk geen probleem is. Wanneer de condens niet verdwijnt, dient u het horloge zo snel mogelijk te laten repareren.

Ik vind dit nuttig (55) Lees meer
Handleiding Casio G-Shock GA-900E-1A3ER Horloge

Gerelateerde producten

Gerelateerde categorieën