Handleiding Casio G-Shock GD-350-1EF Horloge

Handleiding

Operation Guide 3403

E-39

Using the Timer in the Timekeeping Mode

To start a timer countdown ◆

●

In the Timekeeping Mode, press

D

.

This will cause the day of the week and day display to change to a timer display.

Timer indicator

Timer

D

E-38

To perform a countdown

●

The following shows button operations for a countdown.

D

D D D B

Start Stop (Restart) (Stop) Reset

Note

A tone/vibration alert is performed for about 10 seconds when the end of the

x

countdown is reached, and the display returns to the screen that was shown

before the countdown was started.

Even if you exit the Timer Mode while a timer countdown is ongoing, the

x

countdown will continue and the tone/vibration alert operation will be performed

when the end of the countdown is reached.

A timer indicator fl ashes while a countdown operation is in progress.

x

E-37

●

Use

3

B

and

D

to change the currently selected setting (hours, minutes, or

seconds).

Holding down either button scrolls the setting at high speed.

x

To specify a start time of 24 hours, set the timer to 0H 00'00". x

●

After all the settings are the way you want, press

4

A

to exit the setting

screen.

E-36

To set the timer start time

●

In the Timer Mode, hold down

1

A

for about two seconds.

[SET Hold] will appear on the display. After that, [SET

Hold] will disappear and the hours digits will fl ash.

Note

If a timer countdown operation is in progress, press

x

D to stop it and then press B to reset the timer to

its start time before performing the above step.

If a timer countdown operation is paused, press

x B

to reset the timer to its start time before performing

the above step.

●

Use

2

C

to move the fl ashing between the hours, minutes, and seconds.

The fl ashing digits are the ones that are selected.

E-35

To enter the Timer Mode

●

In the Timekeeping Mode, press

C

four

times to enter the Timer Mode.

See “Using Modes” (page E-12).

Seconds

Minutes 1/10 second

Hours

Current time

E-34

Timer

The timer start time can be set in one-second increments up to 24 hours. The watch

will sound a tone and fl ash its display illumination, or it will vibrate when the end of

the timer countdown is reached.

See “To change the alarm/timer alert method” (page E-44).

Note

You can start a timer countdown operation while in the Timekeeping Mode.

See “Using the Timer in the Timekeeping Mode” (page E-39) for more information.

E-33

Note

Once started, elapsed time measurement continues until you press

x D to stop

it, even if you change to a different mode and even if the stopwatch reaches the

elapsed time measurement limit.

If you change to another mode while a split time is frozen on the display, split time

x

display will be canceled.

E-32

To measure time with the stopwatch

●

The following shows button operations for stopwatch operations.

Elapsed time/cumulative time x

D D D D B

Start Stop (Restart) (Stop) Reset

Split time (paused elapsed time reading) x

D B B D B

Start Split Split time display

cancel

Stop Reset

Pressing B while timing is being performed displays the split time (with [SPLIT]

fl ashing), but elapsed timing continues internally.

E-31

Stopwatch

The stopwatch measures elapsed time in units of 1/100 seconds up to 999 hours,

59 minutes, 59.99 seconds. Elapsed time returns to zero automatically and timing

continues from there when the maximum limit is reached.

To enter the Stopwatch Mode

●

In the Timekeeping Mode, press

C

three

times to enter the Stopwatch Mode.

See “Using Modes” (page E-12).

[STW] will appear on the display for about

one second, and then the stopwatch screen

will appear.

Seconds

Minutes 1/100 second

Hours

Current time

E-30

●

After all the settings are the way you want, press

6

A

to exit the setting

screen.

●

To return to the Timekeeping Mode, press

7

C

three times.

To stop a tone/vibration alert operation

●

Pressing any one of the buttons will stop an ongoing tone/vibration alert

operation.

To test the alarm

●

In the Alarm Mode, hold down

D

to perform the tone/vibration alert

operations.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Casio G-Shock GD-350-1EF Horloge. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Casio. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Casio G-Shock GD-350-1EF Horloge in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Casio Horloges
Meer handleidingen voor Horloges

Veelgestelde vragen over Casio G-Shock GD-350-1EF Horloge

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Casio Edifice EFR-573DB-1AVEF Horloge

Handleiding

Casio Timeless Collection W-59-1VQES Horloge

Handleiding

Casio Vintage B640WB-1BEF Horloge

Handleiding

Casio Sheen SHE-3806D-7AEF Horloge

Handleiding

Casio G-Shock GW-9400-1DR Horloge

Handleiding

Casio Edifice EQB-1000D-1AEF Horloge

Handleiding

Casio Sheen SHE-4543GL-8AUEF Horloge

Handleiding

Casio Timeless Collection AQ-S800WD-1EVEF Horloge

Gerelateerde categorieën