Handleiding Conair CS710RB Stijltang

Handleiding

1 ¾ in.

(25.4mm)

and in.

(19mm)

tourmaline ceramic flat irons

Instruction

& Styling

Guide

For your safety and

continued enjoyment

of this product, always

read the instruction book

carefully before using.

Models CS710RB and CS88B

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety

precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER

- Any appliance is electrically

live even when the switch is off. To reduce

the risk of death by electric shock:

1. Always unplug appliance immediately

after using.

2. Do not use while bathing or in the shower.

3. Do not place or store appliance where it

can fall or be pulled into a tub or sink.

4. Do not place in, or drop into, water or other

liquids.

5. If an appliance falls into water, unplug it

immediately. Do not reach into the water.

WARNING

- To reduce the risk of

burns, electrocution, fire, or injury to persons:

1. This appliance should never be left

unattended when plugged in.

2. Do not pull, twist, or wrap line cord around

appliance.

3. This appliance should not be used by, on

or near children or individuals with certain

disabilities.

4. Use this appliance only for its intended use,

as described in this manual. Do not use attach-

ments not recommended by the manufacturer.

5. Never operate this appliance if it has a

damaged cord or plug, if it is not working

properly or if it has been dropped or dam-

aged, or dropped into water. Return the

appliance to an authorized service center

for examination and repair.

6. Keep the cord away from heated surfaces.

7. Never use while sleeping.

8. Never drop or insert any object into any

opening or hose.

9. Do not use outdoors or operate where

aerosol (spray) products are being used or

where oxygen is being administered.

10. Unit is hot when in use. Do not let heated

surfaces touch eyes or skin.

11. Do not place the heated unit directly on

any surface while it is hot or plugged in.

12. Never block the air openings of the appli-

ance or place on a soft surface such as a bed

or couch, where the air openings may be

blocked. Keep the air opening free of lint and

other debris.

13. Do not use an extension cord with this

appliance.

14. Do not touch hot surfaces of the appli-

ance. Use handles or knobs.

15. Do not attempt to touch the housing of

your appliance near the straightening plates,

as it is hot when in use.

16. Do not use with voltage converter.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This flat iron is intended for household use. Use

on Alternating Current (60 hertz) only. This unit is

designed to be operated at 120 volts AC.

This appliance has a polarized plug (one blade

is wider than the other). As a safety feature,

this plug will fit in a polarized outlet only one

way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact

a qualified electrician. Do not attempt to defeat

this safety feature.

TO STRAIGHTEN HAIR

Hair should be clean and completely dried

before using the flat iron. Plug the iron into

an electrical outlet. Turn on unit. Select

desired temperature setting; the indicator

light will blink for each temperature set-

ting until selected temperature is reached.

Indicator light will then become steady.

To turn off, press Off button (lights will go off).

Never leave your flat iron on and unattended.

However, should you fail to turn the unit off it will

shut itself off automatically within 60 minutes.

WARNING: The flat iron's tourmaline

ceramic-coated plates will get very hot

within a few seconds and should not

come into contact with the skin after the

flat iron has been turned on.

INSTANT HEAT TECHNOLOGY

The iron’s unique high temperature settings

and Instant Heat technology provide styling

versatility for all hair types. If you have fine

hair, a low temperature will provide the best

results. If you have thick, wavy or hard-to-

straighten hair, keep the heat setting on high.

You can vary the iron’s temperature according

to your particular need by selecting the desired

temperature setting.

For best results, use a light styling product

before blow-drying hair. Start with a hair

section that is 1 ½ inches wide and no

more than ½ inch thick. Open the iron and

place the hair section between the two hot

plates, close to the scalp. Trap hair between

the plates by firmly squeezing the handles

together. While maintaining the tension,

slowly pull the unit down along the hair

section toward the end. At the end, release

the pressure on the handle and allow the hair

to slide out. Repeat process on additional

sections of hair until you achieve the hair

style you desire. It may be necessary to

repeat process on certain areas, depending on

the texture of your hair.

Some practice is necessary when learning to

use this flat iron. After using the iron several

times, you will learn the ideal way to straight-

en and style your hair.

STYLING WITH THE TOURMALINE

CERAMIC-COATED PLATES

Your new flat iron features tourmaline ceramic

plates for smoother glide, maximum manage-

ability and more professional results.

The Tourmaline Ceramic technology combines

all that is best for your hair. The unique proper-

ties leave hair shinier and healthier looking.

Tourmaline emits infrared heat for gentle styl-

ing, and natural ions that reduce frizz, help

smooth down flyaways and renew the vitality of

your hair. And ceramic generates gentle infrared

energy and evenly distributes heat to protect

hair from damage. Tourmaline ceramic pro-

motes healthy, shiny hair while fighting frizz.

A bonus .25 fl oz. bottle of One ’n Only

®

Argan

Oil is included. Argan oil protects, revitalizes

and nourishes hair. This non-greasy alcohol-

free formula is instantly absorbed, creating

brilliant shine and conditioned, silky hair.

One ’n Only

®

Argan Oil can be purchased

online at www.stylesource.com.

STYLING WITH THE NEW

EASY-GLIDE FLOATING

TOURMALINE CERAMIC COATED PLATE

Your new flat iron has a plate designed with a

little give, to “float.” This provides better con-

tact with hair, eliminating gaps, for straighter

results. The easy-glide tourmaline ceramic

surface is the one of the latest – and best –

technological advances in hair appliances.

The ceramic even heat distribution produces

the ultimate in healthy, shiny, silky-looking

hair. You’ll find that hair glides easily over the

surface of the plates as you’re straightening,

and that it is easier to clean styling product

residue, etc., off the plates after each use.

The ceramic surface also helps smooth down

flyways and frizzies.

As you smooth your hair, heat is evenly

distributed so that the style you create has

a salon-perfect, silky smooth, shiny finish.

Hair also glides right through the plates after

it’s straightened.

USING INSTANT HEAT, THE 30 ULTRA-

HIGH HEAT TEMPERATURE SETTINGS

& UNIFORM HEAT RECOVERY SYSTEM

This flat iron features a powerful ceramic

heater that maintains high temperatures

during use for precision styling. It heats up

quickly to the temperature you’ve selected

for your hair type.

This Instant Heat technology has 30 ultra-high

temperature settings. There is a temperature

range that’s gentle and safe for every type of

hair, from the finest to the curliest and most

resistant, and helps you create the look you

want. And that’s not all. Conair’s professional

salon standards of engineering provide you

with a uniform and improved heat recovery

system that maintains the iron at constant

temperatures. There is a constant surge of

power to ensure that heat is continuously and

quickly delivered for optimal styling results,

unlike other units, which lose heat during use.

This provides consistent styling power so that

every strand of your hair is set with the same

level of heat and comes out the same way for

a perfect finish.

Styling has never been easier with the new

tourmaline ceramic-coated flat iron! Get ready

to experience salon results without the salon!

Temperature Setting Guide

TEMP. CONTROL HAIR TYPE

Low 1–8 Delicate, thin, easy-to-straighten hair

Medium 9–14 Average to thick or treated hair

Med-High 15–20 Thick or wavy hair

High 21–25 Hard-to-straighten hair

Maximum 26–30 Very resistant hair

29% longer plates

for faster styling*

Model CS88B

1 in. (25 mm)

tourmaline ceramic

straightening plates

Extra-long swivel

line cord

Natural ionic

technology

Auto Off

Power On/Off button

*When compared to other

Conair straighteners.

Actual plate size may vary.

30 ultra-high

heat settings

455°F/235°C

Floating

plate

Powerful ceramic heater

15-second

heat-up

Indicator light

3/4 in. (19 mm)

tourmaline ceramic

straightening plates

BONUS

Protective heat-resistant mat

GET TO KNOW YOUR FLAT IRONS

Model CS710RB

USER

MAINTENANCE

Your flat iron is virtually maintenance free. No

lubrication is needed. Keep all vents and open-

ings clear of dirt and dust. If cleaning becomes

necessary, disconnect the unit from the power

source, allow to cool and wipe exterior with a

cloth. If any abnormal condition occurs, unplug

the unit, allow it to cool, and return it for repair

to an authorized service representative only. No

repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be

pulled, twisted, or severely bent. Never wrap

the cord tightly around the appliance. Damage

will occur at the high flex point of entry into

the appliance, causing it to rupture and short

circuit. Inspect the cord frequently for damage.

Stop use immediately if damage is visible or if

unit stops or operates intermittently.

STORAGE

When not in use, your iron is easy to store.

Allow appliance to cool, then simply store out

of reach of children in a safe, dry location.

Do not jerk or strain cord at plug connec-

tions. Do not wrap the line cord around the

appliance. Allow the cord to hang or lie loose

and straight at the point of entry into the

appliance.

WARNING:

IF YOU THINK THE

POWER IS OFF WHEN

THE SWITCH IS OFF,

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are

a dangerous combination. But did you know

that an electric appliance is still electrically

live even if the switch is off? If the plug is in,

the power is on. So when you are not using

your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED FIVE-YEAR WARRANTY

Conair will repair or replace (at our option)

your unit free of charge for 60 months from

the date of purchase if the appliance is

defective in workmanship or materials.

To obtain service under this warranty, return

the defective product to the service center

listed on back, together with your purchase

receipt and $7.50 for postage and handling.

California residents need only provide proof

of purchase and should call 1-800-3-CONAIR

for shipping instructions. In the absence of a

purchase receipt, the warranty period shall

be 60 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 60-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how

long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH

OF THIS OR ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, WHATSOEVER. Some

states do not allow the exclusion or limitation

of special, incidental, or consequential dam-

ages, so the above limitation may not apply

to you.

This warranty gives you specific legal rights,

and you may also have other rights, which

vary from state to state.

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

Please register this product at:

www.conair.com/registration

For information on any Conair or Infiniti by Conair

product, call 1-800-3-CONAIR or visit us on the web

at: www.conair.com/infiniti

©2013 Conair Corporation

150 Milford Road, East Windsor, NJ 08520

7475 N. Glen Harbor Blvd., Glendale, AZ 85307

12PA137611

IB-11923

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Conair CS710RB Stijltang. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Conair. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Conair CS710RB Stijltang in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Conair Stijltangen
Meer handleidingen voor Stijltangen

Veelgestelde vragen over Conair CS710RB Stijltang

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Conair CS650 Stijltang

Handleiding

Conair CS584PX Stijltang

Handleiding

Conair CS97BC Stijltang

Handleiding

Conair CS1000 Stijltang

Handleiding

Conair CS29N Stijltang

Handleiding

Conair CS950 Stijltang

Handleiding

Conair CS1001 Stijltang

Handleiding

Conair CS225 Stijltang

Gerelateerde categorieën