Handleiding Conair NPGBT02 Bikinitrimmer

Handleiding

Instruction Booklet

For your safety and continued enjoyment of this product,

always read the instruction booklet carefully before using.

Model NPGBT02

BIKINIBOMB

Trim & Shave

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety

precautions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

FOR HOUSEHOLD USE ONLY

DANGER – Any appliance is

electrically live, even when the switch is off.

To reduce the risk of death or injury by

electric shock:

1. Always unplug appliance from electrical

outlet immediately after using (except when

charging unit).

2. Do not place or store appliance where it

could fall or be pulled into a tub or sink.

3. Do not place appliance in, or drop into

water or other liquids.

4. Unplug this appliance before cleaning.

WARNING – To reduce the

risk of burns, electric shock, fire, or injury

to persons:

1. Except when charging, never leave a

plugged-in appliance unattended.

2. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instruction

concerning the use of the appliance by a

person responsible for their safety. Children

should be supervised to ensure that they do

not play with the appliance.

3. Use appliance only for its intended use as

described in this manual. Use only attachments

recommended by the manufacturer. Do not use

an extension cord to operate the appliance.

4. Never operate the appliance if it has a

damaged cord or plug, is not working

properly, has been dropped or damaged,

or has been dropped into water. Return the

appliance to a Conair Service Center for

examination and repair.

5. Keep the appliance cord away from

heated surfaces.

6. Do not pull, twist or wrap the cord around

the appliance.

7. Never drop or insert any object into any

opening on the appliance.

8. Do not place the appliance on any surface

while it is operating.

9. Do not use the appliance with a damaged

or broken comb or with teeth missing from the

blades, as injury may result. Before each use,

make certain the blades are aligned properly

and oiled.

10. Keep the air openings free of lint, hair, and

similar objects.

11. Do not use the appliance outdoors or where

aerosol (spray) products are being used or

where oxygen is being administered.

12. This appliance is not a toy. Keep away

from children.

13. THIS PRODUCT IS FOR HOUSEHOLD

USE ONLY.

FEDERAL COMMUNICATIONS

COMMISSION NOTICE

WARNING: Changes or

modifications to this unit not expressly

approved by the party responsible for

compliance could void the user’s authority

to operate the equipment.

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

SUPPLIER’S DECLARATION

OF CONFORMITY

Brand: GirlBomb

Model No.: NPGBT02

Description: Shaver/Trimmer

Responsible Party: Conair LLC,

1 Cummings Point Road, Stamford, CT 06902

(203) 351-9000

Standards: FCC Part 15 Subpart B,

ANSI C63.4-2014

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful

interference, and (2) This device must

accept any interference received, including

interference that may cause undesirable

operation.

DATE OF ISSUE: 11/30/2021

SAVE THESE

INSTRUCTIONS

USER MANUAL

Before using the Class 2 Power Supply,

read these instructions carefully.

Use with adapter CA81

Rated input voltage:

100–240V AC, 50/60Hz 0.2A

Rated output: 4.5V DC 1000mA

CAUTION

1. Ensure jack is plugged into the trimmer unit

before plugging the adapter into the outlet.

2. Do not operate any appliance that has a

damaged output cord or housing.

3. Always unplug the unit before cleaning or

when not in use.

4. This power unit is intended to be correctly

oriented in a vertical or floor-mount position.

5. Be sure voltage is correct before plugging in.

For connection to a power supply not in

the U.S.A, use an attachment plug adapter

of the proper configuration for power outlet.

The adapter included automatically adjusts

to the input voltage. DO NOT USE WITH A

VOLTAGE CONVERTER.

TRIMMER OPERATING

PRECAUTIONS

This trimmer has a built-in rechargeable

battery. Do not throw into fire, apply heat, or

charge, use or leave in a high-temperature

environment.

CAUTION: Any changes or modifications

not expressly approved by Conair

®

LLC, the

manufacturer of this product and the party

responsible for compliance, could void the

user’s authority to operate the equipment.

TROUBLESHOOTING

If your rechargeable trimmer does not seem

to be taking a charge, try the following

troubleshooting steps before returning it

for repair:

1. Be sure the electrical outlet is working by

plugging in another appliance to test the outlet.

2. Make sure the electrical plug is not

connected to a switch that turns power off

when lights are turned off.

3. Make sure the adapter is inserted into the

trimmer properly and all the connections

are secure.

OPERATING

INSTRUCTIONS

CHARGING

1. Before using the trimmer for the first

time, charge continuously for 3 hours.

Maximum battery capacity will be reached

only after 3 charging and discharging

cycles.

2. To charge the trimmer, first ensure the

trimmer is switched off, then insert the small

plug on the charging adapter into the hole on

the bottom of the trimmer. Plug the adapter

into any wall outlet (at the voltage listed on the

label affixed to the adapter). Unplug adapter

when not in use.

3. The adapter may become warm while

charging. This is normal.

4. The red charging LED indicator light on the

trimmer will flash when correctly connected.

When it is fully charged, the red charging LED

indicator light will stay red and stop flashing.

5. A full charge will supply 90 minutes of

cordless runtime.

6. When the trimmer is running low on a

charge, the LED indicator light will flash,

warning you that there is approximately 10

minutes of battery use remaining.

7. To maintain optimum capacity of the

rechargeable battery, it is highly recommended

to fully discharge and then recharge the

trimmer for 3 hours every 6 months.

WARNING: If the charging light suddenly

starts to flash rapidly, the appliance is faulty.

If this happens, please stop charging, remove

the adapter from the outlet and contact our

Customer Care Center at 1-800-3-CONAIR.

TRIMMER CHARGING

PRECAUTIONS

• Avoid charging the battery at temperatures

below 41°F (5°C) or above 95°F (35°C).

• Avoid charging the battery in direct sunlight

or near a radiating heat source.

• Even though the trimmer may not be used

for an extended period of time, charge once a

month to preserve battery life.

• The power cord cannot be replaced. If it is

damaged, the DC adapter should be discarded.

CORDED USE

To use the trimmer connected directly to a

power source:

1. Ensure the trimmer is switched off.

2. Insert the small plug on the charging adapter

into the hole on the bottom of the trimmer.

3. Plug the charging adapter into a suitable

power source and switch on.

The red LED charging light will flash when the

adapter is correctly inserted into the appliance

and connected to an outlet.

NOTE: If the battery is weak and low on a

charge, wait approximately 1 minute before

switching the trimmer on.

WET/DRY FEATURE

This device is water resistant. It may be

exposed to splashing water in the shower,

and can be rinsed clean under the faucet,

but should never be completely submerged

in water.

INSTRUCTIONS FOR USE

TO SWITCH TRIMMER & SHAVER

HEAD ATTACHMENTS

Hold the power handle while turning the

trimmer head counterclockwise until the

mark is aligned properly with the mark.

At this point, you should be able to easily lift

the trimmer head from the handle. To use a

new attachment head on the unit, properly

install the head into position. Making sure

the

mark is aligned with the mark, turn

clockwise until the and circle marks are

aligned and lock into position (Fig. 1).

Fig. 1

Remove the foil head assembly from the shaver

head by pushing on the two side buttons and

pulling the foil away from the head (Fig. 2).

Fig. 2

press

press

GETTING STARTED

1. To use, press ON/OFF switch to ON.

2. After use, press ON/OFF switch to OFF.

3. Cord/cordless operation for total flexibility.

4. Japanese stainless steel blades for sharp

and effortless cutting.

TRIMMING

1. Start with the guide comb attached for

first-time use.

2. Turn the unit on.

3. To fully remove hair or to outline the bikini

area, use the trimmer without the attachment

comb.

4. When removing hair, gently move the blades

against the direction of growth.

5. To outline, place the blades perpendicular

to the skin surface and apply the blades to the

edge of the hair. Use the blades to create the

desired outline.

6. For the cleanest finish, follow up with the

foil shaver.

7. For cutting hair without completely removing

it, attach the detail comb to the head. Place

the comb on the cutting blades first, align the

comb ribs with top surface of trimmer head

housing and then snap down onto the back of

the trimming head (Fig. 3).

8. Snap off the comb guide to release from the

trimmer head (Fig. 4).

Fig. 3 Fig. 4

TAKING CARE

OF YOUR TRIMMER

BLADE CARE

Because the trimmer blades are precision

made for a very special use, they should

always be handled with care. Rinse blades

under water only, allow to air-dry and store

the trimmer until the next use.

To promote the long life of the appliance, use

your trimmer only for the purpose intended by

the manufacturer.

USING THE SHAVER HEAD

ATTACHMENT

The shaver head attachment is designed

to provide a clean, close shave. Take care

with the foil as it is very sensitive and easily

damaged. Always inspect it for damage before

you use it. Never use a foil that is damaged, as

this can result in injury. Make sure your skin

is clean and dry before use. Do not use any

lotions or oils before shaving.

SHAVING

NOTE: If you are switching to an electric or

battery-operated shaver for the first time,

it will take about 12 uses for your skin

and hair to adjust to this new method of

removing hair. Do not evaluate performance

until you have allowed your skin and hair

time to adjust.

HOW TO CLEAN YOUR SHAVER

HEAD ATTACHMENT

1. Make sure unit is in the OFF position

before cleaning.

2. Hold shaver head attachment and lift up

from the back (Fig. 5), then press foil frame

release buttons on each side and lift up (the

cutter will now be in view). Be careful not to

push on the foils. They are delicate and can

easily be damaged.

Fig. 5

press press

3. Rinse the shaving foil under running water or

in a sink. Do not use hot water. Use only warm

or cold water.

4. After rinsing, allow the shaving foil to air-dry.

5. If the body of the power handle becomes

dirty, wipe off with a damp cloth and mild

detergent or soap. Never use thinners, other

solvents, or any harsh cleaners.

To maintain the best cutting performance, be

sure to replace the foil head and cutter after

every 6 months of regular use. Contact Conair

Consumer Service at 1-800-3-CONAIR to order

the replacement parts.

BATTERY SAFETY INFORMATION

1. This device requires one 14500 lithium-ion

battery.

2. Battery is not to be removed by

the consumer unless instructed by the

manufacturer.

3. Since the battery is sensitive to high

temperatures, when storing the device, keep it

in a cool, dry place.

4. Never put batteries into a fire.

5. Switch off device after use.

6. Keep batteries away from children, especially

the batteries that are small enough to ingest.

7. If a battery is ingested, seek immediate

medical help.

8. Never open, crush, puncture or disassemble

batteries.

9. Dispose of batteries according to any state

and local regulations.

10. Do not dispose of rechargeable batteries as

solid waste.

BATTERY DISPOSAL

This appliance contains a lithium-ion battery. To

protect the environment, this appliance and its

battery must be disposed of safely. At the end

of its life, please take this appliance to a

recycling center, where the internal

rechargeable battery should be removed by a

professional and recycled separately. For more

information about the recycling of electrical and

battery-operated appliances, please contact

your local recycling or environmental protection

office or your household waste disposal service.

For specific questions regarding the

replacement of batteries in this product, please

contact our Conair Customer Care Line at

1-800-3-CONAIR.

1. Remove Screw

2. Remove

Battery Cover

3. Remove

Internal

Assembly

4. Take Apart

Battery

NPGBT02 BIKINIBOMB

TRIM & SHAVE

Lithium-Ion Rechargeable

Cord/Cordless Trimmer with

Japanese Stainless Steel Blades

Hypoallergenic

Foil Shaver

WARNING:

IF YOU THINK

THE POWER IS OFF

WHEN THE SWITCH

IS OFF,

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water

are a dangerous combination. But did you

know that an electric appliance is still

electrically live even if the switch is off? If

the plug is in, the power is on. So when you

are not using your appliances, keep them

unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED TWO-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 24 months from the

date of purchase if the appliance is defective

in workmanship or materials.

To obtain service under this warranty, return

the defective product to the service center

listed on back, together with your purchase

receipt. California residents need only

provide proof of purchase and should call

1-800-3-CONAIR for shipping instructions.

In the absence of a purchase receipt, the

warranty period shall be 24 months from the

date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 24-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how

long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER.

Some states do not allow the exclusion

or limitation of special, incidental, or

consequential damages, so the above

limitation may not apply to you.

This warranty gives you specific legal rights,

and you may also have other rights, which vary

from state to state.

For info on any Conair product, call

1-800-3-CONAIR or visit us on the web at

www.conair.com

Please register this product at

www.conair.com/registration

©2022 Conair LLC

Service Center

7475 North Glen Harbor Blvd.

Glendale, AZ 85307

21NP081578

IB-17495

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Conair NPGBT02 Bikinitrimmer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Conair. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Conair NPGBT02 Bikinitrimmer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Conair Bikinitrimmers
Meer handleidingen voor Bikinitrimmers

Veelgestelde vragen over Conair NPGBT02 Bikinitrimmer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Conair BT2 Precision Bikinitrimmer

Handleiding

Conair BT2GBR Precision Bikinitrimmer

Handleiding

Remington WPG4030AU Bikinitrimmer

Handleiding

SilverCrest IAN 95827 Bikinitrimmer

Handleiding

Philips HP6379 Bikini Perfect Bikinitrimmer

Handleiding

Remington WPG4110 Bikinitrimmer

Handleiding

Remington WPG4035 Bikinitrimmer

Handleiding

Clio PalmPerfect Bikinitrimmer

Gerelateerde categorieën