Handleiding Conrad IPS120M Papiervernietiger

Handleiding

These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,

D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming,

or the capture in electronic data processing systems require the prior written approval by the editor.

Reprinting, also in part, is prohibited.

These operating instructions represent the technical status at the time of printing. Changes in

technology and equipment reserved.

© Copyright

2013

by Conrad Electronic SE.

V5_1113_02-JH

Shredding paper

• Do not insert more than 12 sheets of paper (size DIN A4 with a maximum grammage of

80 g/m

2

) into the insertion slot.

• Do not shred adhesive notes or paper with remains of adhesive.

• The red “Overheat” LED lights up when the motor is overheated. Wait until the light

goes out again before continuing to shred documents.

1. Slide the selector switch to the left into the “AUTO” position.

2. Now, carefully insert the paper into the insertion slot. The paper will automatically be fed in and shredded.

3. When nished, slide the selector switch to the central position “OFF”.

Shredding CDs / credit cards

Shred only one CD/credit card at a time.

1. Attach the small collection container onto the retaining xture within the collection container.

2. Slide the selector switch to the right, into the “ON CD REV” position. The motor is now permanently

turned on.

3. Next, carefully insert a single CD/credit card into the CD/credit card insertion slot. The CD/credit card

will be fed in and shredded.

4. When nished, slide the selector switch to the central position, “OFF”.

Clearing paper jams

1. Slide the selector switch to the right, into the “ON CD REV” position.

2. The cutting unit will now run in the reverse direction and push the jammed paper out again.

3. When nished, slide the selector switch to the central position, “OFF”.

Troubleshooting

Problem Cause Solution

The cutting unit continuously

keeps on running in the “AUTO”

position.

The paper container is full and

the paper from the cutting unit

cannot feed through.

Unplug the mains plug and

empty the container.

After shredding, there are still

pieces of paper remaining in the

cutting unit.

The remaining pieces of paper

are stuck between blades.

Slide the selector switch into

the “ON CD REV” position.

The automatic feed stops,

however there is still paper in the

insertion slot.

The paper was inserted into the

insertion slot at an angle.

Ensure the paper is straight as

it goes into the insertion slot.

The paper is too soft, thin, damp

or creased.

Fold, dry or atten the paper.

The device does not work,

although no pieces of paper

remain in the feeder.

The motor is overheated.

Leave the device to cool down

before putting it into operation

again.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste.

At the end of its service life, dispose of the product according to the relevant statutory regulations.

You thus full your statutory obligations and contribute to the protection of the environment.

Technical data

Operating voltage .................................................................. 220 - 240 V/AC, 50 Hz

Power consumption ............................................................... max. 1.7 A

Safety level ............................................................................ 3 (DIN 32757)

Noise level ............................................................................. 72 dB

Duty cycle .............................................................................. 3 minutes ON / 40 minutes OFF

Shredding speed ................................................................... 2 m/min

Container volume .................................................................. 21 l (paper)

1 l (CD/credit card)

Operating temperature .......................................................... -10 to +85 ºC

Blade clearance ..................................................................... 5 mm (paper)

40 mm (CD/credit card)

Insertion slot width ................................................................. 220 mm (paper)

123 mm (CD/credit card)

Cable length .......................................................................... 1.2 m

Dimensions (W x H x D) ........................................................ 360 x 400 x 244 mm

Weight ................................................................................... 6.5 kg

Document shredder “Particle / CD Cut”

Version

11/13

Item no.

88 35 41

Intended use

This product is designed for shredding paper, CDs and credit cards. The separate collection container allows

the separation of shredded CDs and credit cards from shredded paper. Power is supplied via a standard

mains socket (230 V/AC, 50 Hz). The product should only be used in dry indoor areas.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the

product for purposes other than those described above, the product may be damaged. In addition, improper

use can cause hazards such as short circuiting, re, electric shock etc. Read the instructions carefully and

keep them. Make this product available to third parties only together with its operating instructions.

Delivery content

• Document shredder

• Operating instructions

Safety instructions

Read the operating instructions carefully and especially observe the safety information.

If you do not follow the safety instructions and information on proper handling in this

manual, we assume no liability for any resulting personal injury or damage to property.

Such cases will invalidate the warranty/guarantee.

a) Persons / Product

• Do not reach into the feeder slot.

• Do not insert paper pin, staples or any other metal parts into the feeder slot.

• Keep long hair away from around the feeder slot.

• Keep ties, scarves, loose clothing and long necklaces or bracelets away from the feeder slot.

• Do not use spray bottles / cans in the immediate vicinity of the product.

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. These may become dangerous

playing material for children.

• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,

moisture, ammable gases, vapours and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and protect it from

any accidental use. Safe operation can no longer be guaranteed if the product:

- is visibly damaged,

- is no longer working properly,

- has been stored for extended periods in poor ambient conditions or

- has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage

the product.

• Unplug the mains plug from the mains outlet before cleaning the product or storing it for a

longer period.

• Do not operate the device for longer than two minutes to avoid overheating the motor.

• The product should not be connected immediately after it has been brought from an area of

cold temperature to an area of warm temperature. Condensed water might destroy the product.

Wait until the product stabilising to adapt to the new ambient temperature before use.

b) Miscellaneous

• Consult an expert when in doubt about operation, safety or connection of the device.

• Maintenance, modications and repairs are to be performed exclusively by an expert or at a

qualied shop.

• If you have questions which remain unanswered by these operating instructions, contact our

technical support service or other technical personnel.

Operating elements

REV

ON CD

OFFAUTO

Power

Overheat

MAX.12 Sheets/one time(A4)

1 2 3 4 5

1 Selector switch

2 “Power” LED

3 “Overheat” LED

4 CD/credit card insertion slot

5 Paper insertion slot

Operation

1. Place the shredder on a level surface.

2. Plug the mains plug into a mains socket.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Conrad IPS120M Papiervernietiger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Conrad. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Conrad IPS120M Papiervernietiger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Conrad Papiervernietigers
Meer handleidingen voor Papiervernietigers

Beoordeling

Veelgestelde vragen over Conrad IPS120M Papiervernietiger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Conrad Streifen I Papiervernietiger

Handleiding

Conrad Partikelschnitt Papiervernietiger

Handleiding

Conrad IPS080D Papiervernietiger

Handleiding

Conrad IPS018.s Papiervernietiger

Handleiding

Conrad IPS050D Papiervernietiger

Handleiding

Olympia CC 310.4 Papiervernietiger

Handleiding

Iwata SHRED-X ELITE Papiervernietiger

Handleiding

Rexel Optimum AutoFeed+ 300X Papiervernietiger

Gerelateerde categorieën