Handleiding Contec CMS50D1 Pulse-oxymeter

Handleiding

CISPR 11 for use in all establishments,including

domestic establishments and those directly

connected to the public low-voltage power

supply network that supplies buildings used

for domestic purposes.

Harmonic

emissions

IEC 61000-3-2

Not applicable

Voltage

fluctuations/

flicker emission

IEC 61000-3-3

Not applicable

Guidance and manufacture’s declaration-electromagnetic immunity

for all EQUIPMENT and SYSTEMS

Guidance and manufacture’s declaration-electromagnetic immunity

The CMS50D1 Pulse Oximeter is intended for use in the electromagnetic environment specified specified

below. The the user of CMS50D1 Pulse Oximeter should assure that it is used in such an environment.

Immunity test IEC60601 test level Compliance level

Electromagnetic environment-

guidance

Electrostatic

discharge (ESD) IEC

61000-4-2

±6KV contact

±8KV air

±6KV contact

±8KV air

Floors should be wood, concrete

or ceramic tile. If floor are

covered with synthetic material,

the relative humidity should be at

least 30%.

Power frequency

(50Hz) magnetic

field

IEC 61000-4-8

3A/m 3A/m Power frequency magnetic fields

should be at levels characteristic

of a typical location in a typical

commercial or hospital

environment

Guidance and manufacture’s declaration-electromagnetic immunity

for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING

Guidance and manufacture’s declaration-electromagnetic immunity

The CMS50D1 Pulse Oximeter is intended for use in the electromagnetic environment specified below. The

customer or the user of CMS50D1 Pulse Oximeter should assure that it is used in such an environment.

Immunity

test

IEC60601

test level

Compliance

level

Electromagnetic environment -guidance

Radiated RF

ICE 61000-

4-3

3V/m

80MHz to

2.5GHz

3V/m

Portable and mobile RF communication equipment should be

used no closer to any part of the CMS50D1 Pulse Oximeter,

including cables, than the recommended separation distance

calculated from the equation applicable to the frequency of the

transmitter.

recommended separation distance

80MHz to

800MHz

800MHz to

2.5GHz

Where P is the

maximum output

power rating of the transmitter in watts (W) according to the

transmitter manufacturer and d is the recommended separation

distance in meters (m).

Field strengths from fixed RF transmitters, as determined by an

electromagnetic site survey,

a

should be less than the compliance

level in each frequency range.

b

Interference may occur in the vicinity of equipment marked

with the following symbol:

NOTE 1 At 80MHz and 800MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by

absorption and reflection from structures, objects and people.

a

Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land

mobile radios, amateur radio, AM and FM radio broadcast and TV broadcastcannot be predicted

theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an

electromagnetic site survey should be considered. If the measured field strength in the location in which

The CMS50D1 Pulse Oximeter is used exceeds the applicable RF compliance level above, the CMS50D1

Pulse Oximeter should be observed to verify normal operation. If abnormal performance is observed,

additional measures may be necessary, such as reorienting or relocating the CMS50D1 Pulse Oximeter.

b

Over the frequency range 150 KHz to 80 MHz, field strengths should be less than 3V/m.

Recommended separation distances between portable and mobile

RF communications equipment and the EQUIPMENT or SYSTEM

for EQUIPMENT or SYSTEM that not LIFE-SUPPORTING

Recommended separation distances between

portable and mobile RF communications equipment and the CMS50D1 Pulse Oximeter

The CMS50D1 Pulse Oximeter is intended for use in the electromagnetic environment in which radiated RF

disturbances are controlled. The customer or the user of the CMS50D1 Pulse Oximeter can help prevent

electromagnetic interference by maintaining a minimum distance between portable and mobile RF

communications equipment (transmitters) and the CMS50D1 Pulse Oximeter as recommended below, according

to the maximum output power of the communications equipment.

Rated maximum output

power of transmitter

(W)

Separation distance according to frequency of transmitter

(m)

150KHz to 80MHz 80MHz to 800MHz

800MHz to 2.5GHz

0.01 0.12 0.12 0.23

0.1 0.37 0.37 0.74

1 1.17 1.17 2.33

10 3.69 3.69 7.38

100 11.67 11.67 23.33

For transmitters rated at a maximum output power not listed above, the recommended separation distanced in

meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the

maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80MHz and 800MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by

absorption and reflection from structures, objects and people.

P

E

d















1

5.3

P

E

d















1

7

P

E

d















1

5.3

P

E

d















1

5.3

P

E

d















1

7

IV

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Contec CMS50D1 Pulse-oxymeter. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Contec. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Contec CMS50D1 Pulse-oxymeter in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Contec Pulse-oxymeters
Meer handleidingen voor Pulse-oxymeters

Beoordeling

Gerelateerde producten

Handleiding

Medisana PM 100 Connect Pulse-oxymeter

Handleiding

Masimo Rad-5v Pulse-oxymeter

Handleiding

Rossmax SB100 Pulse-oxymeter

Handleiding

Homedics PX-130 Pulse-oxymeter

Handleiding

Yuwell YX300 Pulse-oxymeter

Handleiding

Rossmax SB200 Pulse-oxymeter

Handleiding

Yuwell YX302 Pulse-oxymeter

Handleiding

Henry Schein H100B Pulse-oxymeter

Gerelateerde categorieën