Handleiding Crivit KI-1740 Inline skates

Handleiding

12

Removing the skates

Prepare the skates for wear

following delivery

Important!

Ensure that your inline skates fit

correctly. The outer boot should not

become deformed when you close the

quick-release fastener. Do not use force

to close the quick-release fastener.

If your outer boot is deformed then this

is either a sign that the tension is incor-

rect or that you may have purchased

inline skates in the wrong size.

Note!

To find the right tension for your foot,

pull the rocker fastener upwards at an

angle and move the ratchet strip to the

correct position for you.

1. Push the pressure slide (3) on the quick-

release fastener (4) inwards in the direction

of the arrow, and open the quick-release

fastener (figure G).

2. Pull the rocker fastener (2) upwards at an

angle, and pull the ratcheted strip (1) out of

the opening on the rocker fastener

(figure H).

3. Open the Velcro fastener (5) (figure I).

4. Open the laces (6).

Putting the skates on

1. Pull on the inline skates using the donning

aids (7) (figure J).

2. Do up the laces.

3. Close the Velcro fastener.

4. Push the ratcheted strip into the correct

opening under the rocker lock, and set it to

the correct tightness (figure K).

5. Close the quick-release fastener (‘CLICK’).

Maintenance

Changing the brake (figure L)

Note:

Worn brakes do not function correctly.

An angle of more than 40 degrees

between the frame and the surface is

a sign of worn brakes. If the distance

between the brake block and the

ground becomes too large (more than

17mm), then the brake block must be

exchanged.

• Unscrew the brake block (3) on the inline

skate with the enclosed Allen key.

• Pull the brake block screws out and remove

the brake block (1) from the brake block

mounting (2).

• Attach the new brake block back onto the

brake block mounting securely using the

brake block screws.

Changing the rollers (figure M)

Important!

• Please observe the chapter on

technical data:

Rollers with a different diameter

could change the handling

characteristics and could mean a risk

to the user in some circumstances.

You should therefore not use the

skates if the rollers cannot be fitted

perfectly. Never install larger rollers

then those originally used in the

inline skates.

• Please observe the following with

regard to the axle bolts:

Self-sealing lacquer must be re-

applied to the screw thread after the

screw connection has been released.

We recommend always doing this

step as a precautionary measure.

Self-sealing lacquer is available from

DIY stores or specialist retailers.

GB

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Crivit KI-1740 Inline skates. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Crivit. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Crivit KI-1740 Inline skates in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Crivit Inline skates
Meer handleidingen voor Inline skates

Veelgestelde vragen over Crivit KI-1740 Inline skates

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Crivit DI-1736 Inline skates

Handleiding

Crivit IAN 93717 Inline skates

Handleiding

Crivit IAN 277825 Inline skates

Handleiding

Crivit IAN 327356 Inline skates

Handleiding

Crivit IAN 93715 Inline skates

Handleiding

Crivit IAN 327344 Inline skates

Handleiding

Crivit IAN 346372 Inline skates

Handleiding

Crivit IAN 97337 Inline skates

Gerelateerde categorieën