Handleiding DeWalt DCD793B Schroef-boormachine

Handleiding

9

ENGLISH

Speed Selection (Fig.G)

The tool features two speed settings for greaterversatility.

NOTE: Do not change speeds when the tool is running.

Always allow the tool to come to a complete stop before

changingspeed.

1. To select Speed 1(high torque setting), turn the tool off

and permit it to stop. Slide the speed selector

7

forward

(towards thechuck).

OPERATION



WARNING: To reduce the risk of serious personal

injury, turn unit off and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start‑up can causeinjury.

Installing a Bit or Accessory into a Keyless

Chuck (Fig.F)



WARNING: Do not attempt to tighten drill bits (or

any other accessory) by gripping the front part of the

chuck and turning the tool on. Damage to the chuck

and personal injury may result. Always lock off trigger

switch and disconnect tool from power source when

changingacces sories.



WARNING: Always ensure the bit is secure before

starting the tool. A loose bit may eject from tool

causing possible personalinjury.

To insert a drill bit

14

or other accessory, follow thesesteps.

1. Turn tool off and remove batterypack.

2. Grasp the black chuck sleeve

10

with one hand and

use the other hand to secure the tool. Rotate the

sleeve counterclockwise far enough to accept the

desiredaccessory.

3. Insert the accessory about 3/4" (19 mm) into the chuck

and tighten securely by grasping and rotating the chuck

sleeve

10

clockwise with one hand while holding

the tool with the other. When the chuck

9

is nearly

tightened you will hear a clicking sound. After 8‑12 clicks

the chuck is securely tightened around the accessory.

Your tool is equipped with an automatic spindle lock

mechanism. This allows you to open and close the chuck

with onehand.

4. Be sure to tighten chuck with one hand on the

chuck sleeve and one hand holding the tool for

maximumtightness.

5. To release the accessory, repeat steps 1and 2above.

Belt Hook and Bit Clip (Fig.E)

(OptionalAccessory)



WARNING: To reduce the risk of serious personal

injury, ONLY use the tool’s belt hook to hang the

tool from a work belt. DO NOT use the belt hook

for tethering or securing the tool to a person or object

during use. DO NOT suspend tool overhead or suspend

objects from the belthook.



WARNING: To reduce the risk of serious personal

injury, ensure the screw holding the belt hook issecure.

ASSEMBLY AND ADJUSTMENTS



WARNING:

To reduce the risk of serious personal

injury, turn unit off and

remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An accidental

start‑up can causeinjury.

Wall Mounting

Some DeWALT chargers are designed to be wall mountable

or to sit upright on a table or work surface. If wall mounting,

locate the charger within reach of an electrical outlet, and

away from a corner or other obstructions which may impede

air flow. Use the back of the charger as a template for the

location of the mounting screws on the wall. Mount the

charger securely using drywall screws (purchased separately)

at least 1” (25.4mm) long, with a screw head diameter of

0.28–0.35” (7–9mm), screwed into wood to an optimal

depth leaving approximately 7/32” (5.5 mm) of the screw

exposed. Align the slots on the back of the charger with the

exposed screws and fully engage them in theslots.

SAVE THESE INSTRUCTIONS FOR

FUTURE USE

2. The charger and battery pack may become warm to the

touch while charging. This is a normal condition, and

does not indicate a problem. To facilitate the cooling of

the battery pack after use, avoid placing the charger or

battery pack in a warm environment such as in a metal

shed or an uninsulatedtrailer.

3. If the battery pack does not charge properly:

a. Check operation of receptacle by plugging in a lamp

or other appliance;

b. Check to see if receptacle is connected to a light

switch which turns power off when you turn out

thelights;

c. If charging problems persist, take the tool, battery

pack and charger to your local servicecenter.

4. You may charge a partially used pack whenever you

desire with no adverse effect on the batterypack.

Charger Cleaning Instructions



WARNING:Shock hazard. Disconnectthe charger

from the AC outlet before cleaning. Dirt and grease

may be removed from the exterior of the charger using

a cloth or soft non‑metallic brush. Do not use water or

any cleaningsolutions.

IMPORTANT: When attaching or replacing the belt hook or

bit clip, use only the screw

11

that is provided. Be sure to

securely tighten thescrew.

The belt hook

12

and bit clip

13

can be attached to

either side of the tool using only the screw provided, to

accommodate left‑ or right‑ handed users. If the belt hook

or bit clip is not desired at all, they can be removed from

thetool.

To move the belt hook or bit clip, remove the screw that

holds it in place then reassemble on the opposite side. Be

sure to securely tighten thescrew.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je DeWalt DCD793B Schroef-boormachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met DeWalt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van DeWalt DCD793B Schroef-boormachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor DeWalt Schroef-boormachines
Meer handleidingen voor Schroef-boormachines

Veelgestelde vragen over DeWalt DCD793B Schroef-boormachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

DeWalt DCD777 Schroef-boormachine

Handleiding

DeWalt DCD701F2 Schroef-boormachine

Handleiding

DeWalt DWD115K Schroef-boormachine

Handleiding

DeWalt DC742KA Schroef-boormachine

Handleiding

DeWalt DC728 Schroef-boormachine

Handleiding

DeWalt DCD709C2 Schroef-boormachine

Handleiding

DeWalt DC985KA Schroef-boormachine

Handleiding

DeWalt DC940KB Schroef-boormachine

Gerelateerde categorieën