Handleiding DeWalt DCD793B Schroef-boormachine

Handleiding

ENGLISH

10

Performing an Application (Fig.A)



WARNING: To reduce the risk of personal

injury, ALWAYS ensure workpiece is anchored or

clampedfirmly.



WARNING: Always wait until the motor has come to

a complete standstill before changing the direction

ofrotation.

Prior to Performing Work

• Set the speed selector

7

. Refer to SpeedSelection.

• Install the appropriate bit or accessory into the chuck.

Refer to accessory installation instructions in thismanual.



WARNING:

• Do not use this tool to mix or pump easily

combustible or explosive fluids (benzine, alcohol,etc.).

• Do not mix or stir flammable liquids

labeledaccordingly.

Screwdriving

Your tool has a clutch with adjustable torque for driving

and removing a wide array of fastener shapes and sizes. The

numbers 1–15 on the mode selection collar

6

are used to

set a torque range for screwdriving. The higher the number

on the collar, the higher the torque and the larger the

fastener which can bedriven.

1. Turn the mode selection collar to the desiredposition.

Refer to Mode Selection.

2. Pull the trigger switch applying pressure in a straight line

with the bit until the fastener is seated at the desired

depth in theworkpiece.

Worklight (Fig.A)

The worklight

8

is activated when the trigger switch is

depressed, and will automatically turn off 20seconds after

the trigger switch is released. If the trigger switch remains

depressed, the worklight will remainon.

NOTE: The worklight is for lighting the immediate work

surface and is not intended to be used as aflashlight.

Variable Speed Trigger and Forward/

Reverse Control Button (Fig.A)

The tool is turned on and off by pulling and releasing the

variable speed trigger

4

. The farther the trigger is depressed, the

Proper Hand Position (Fig.A, J)



WARNING: To reduce the risk of serious personal injury,

ALWAYS use proper hand position as shown.



WARNING: To reduce the risk of serious personal

injury, ALWAYS hold securely in anticipation of a

suddenreaction.

Proper hand position requires one hand on the main

handle

3

and the other hand holding the battery pack

1

.

Installing and Removing the Battery Pack

(Fig.I)



WARNING: Ensure the tool/appliance is in the off

position before inserting the batterypack.

NOTE: For best results, make sure your battery pack is

fullycharged.

1. To install the battery pack

1

into the tool handle, align

the battery pack with the rails inside the tool’s handle

and slide it into the handle until the battery pack is firmly

seated in the tool and ensure that it does notdisengage.

2. To remove the battery pack from the tool, press the

battery pack release button

2

and firmly pull the battery

pack out of the tool handle. Insert it into the charger as

described in the charger section of thismanual.

Mode Selection (Fig.H)

The mode selection collar

6

can be used to select

the correct operating mode depending upon the

plannedapplication.

To select, rotate the collar until the desired symbol aligns

with thearrow.



WARNING: When the mode selection collar is in the

drill or hammerdrill positions, the drill will not clutch.

The drill may stall if overloaded, causing a suddentwist.

DCD793

Symbol Mode

Drilling

1-15 Screwdriving (higher number = greater torque)

DCD798

Symbol Mode

Drilling

1-15 Screwdriving (higher number = greater torque)

Hammerdrilling

2. To select Speed 2(high speed setting), turn the tool off

and permit it to stop. Slide the speed selector back (away

from thechuck).

3. If the tool does not change speeds, confirm that the

speed selection switch is completely engaged in the

forward or backposition.

higher the speed of the tool. Your tool is equipped with a brake.

The chuck will stop as soon as the trigger switch is fullyreleased.

A forward/reverse control button

5

determines the

rotational direction of the tool and also serves as a

lock‑offbutton.

• To select forward rotation (clockwise), release the trigger

and depress the forward/reverse control button on the

right side of thetool.

• To select reverse (counterclockwise), depress the forward/

reverse control button on the left side of thetool.

NOTE: The center position of the control button locks the

tool in the off position. When changing the position of the

control button, be sure the trigger isreleased.

NOTE: Continuous use in variable speed range is not

recommended. It may damage the switch and should

beavoided.

NOTE: The first time the tool is run after changing the

direction of rotation, you may hear a click on start‑up. This is

normal and does not indicate aproblem.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je DeWalt DCD793B Schroef-boormachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met DeWalt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van DeWalt DCD793B Schroef-boormachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor DeWalt Schroef-boormachines
Meer handleidingen voor Schroef-boormachines

Veelgestelde vragen over DeWalt DCD793B Schroef-boormachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

DeWalt DCD777 Schroef-boormachine

Handleiding

DeWalt DCD701F2 Schroef-boormachine

Handleiding

DeWalt DWD115K Schroef-boormachine

Handleiding

DeWalt DC742KA Schroef-boormachine

Handleiding

DeWalt DC728 Schroef-boormachine

Handleiding

DeWalt DCD709C2 Schroef-boormachine

Handleiding

DeWalt DC985KA Schroef-boormachine

Handleiding

DeWalt DC940KB Schroef-boormachine

Gerelateerde categorieën