Handleiding Finlux FX50296S31Y2P LED televisie

Handleiding

English - 49 -

The Wireless feature of the TV supports 802.11 a,b,g

& n type modems. It is highly recommended that

you should use the IEEE 802.11n communication

protocol in order to avoid any possible problems

while watching videos.

You must change your modem’s SSID when there

are any other modems around with the same SSID.

You can encounter connection problems otherwise.

Use a wired connection if you experience problems

with a wireless connection.

&RQ¿JXULQJ:LUHOHVV'HYLFH6HWWLQJV

Open the Network/Internet Settings menu and

select Network Type as Wireless Device to start

connection process.

The TV will scan the wireless networks automatically.

A list of available networks will be displayed. Please

select your desired network from the list.

Note: ,I WKH PRGHP VXSSRUWV 1 PRGH \RX VKRXOG VHW 1

mode settings.

If the selected network is protected with a password,

please enter the correct key by using the virtual

keyboard. You can use this keyboard via the

directional buttons and the OK button on the remote

control.

Wait until the IP address is shown on the screen.

This means that the connection is now established.

To disconnect from a wireless network, highlight

Network Type and press Left or Right buttons to set

as Disabled.

Highlight Internet Speed Test and press the OK

button to check your internet connection speed.

Highlight Advanced Settings and press the OK

button to open the advanced setting menu. Use

directional and numeric buttons to set. Press the OK

button to save settings when complete.

Other Information

The status of the connection will be displayed as

Connected or Not Connected and the current IP

address, if a connection is established.

Connecting to your mobile device via WiFi

If your mobile device has WiFi feature, you can

connect it to your TV via a router, in order to access

the content in your device. For this, your mobile

device must have an appropriate sharing software.

Connect to your router following the steps stated

above in the Wireless Connectivity section.

Afterwards, engage your mobile device with the

router and then activate the sharing software on

\RXUPRELOHGHYLFH7KHQVHOHFW¿OHVWKDW\RXZDQW

to share with your TV.

If the connection is established correctly, you will

EHDEOHWRDFFHVVWKHVKDUHG¿OHVIURP\RXUPRELOH

device via the Media Browser of your TV.

Enter the Media Browser menu and the playback

device selection OSD will be displayed. Select your

mobile device and press the OK button to continue.

If available, you can download a virtual remote

controller application from the server of your mobile

device application provider.

Note: This feature may not be supported on all mobile

devices.

Wake ON

Wake-on-LAN (WoL) and Wake-on-Wireless LAN

(W

oWLAN) are standards that allow a device to be

turned on or woken up by a network message. The

message is sent to the device by a program executed

on a remote device connected to the same local area

network, such as a smartphone.

Your TV is WoL and WoWLAN compatible. To enable

this feature set the Wake On option in the Network/

Internet Settings menu as On. It is necessary that

both the device, from which the network message will

be sent to the TV, and the TV are connected to the

same network. Wake On feature is only supported for

Android OS devices and can only be used via YouTube

DQG1HWÀL[DSSOLFDWLRQV

In order to use this feature the TV and the remote

device should be connected at least once while the

TV is on. If the TV is powered off, the connection

should be reestablished, the next time it is switched

on. Otherwise this feature will be unavailable. This

does not apply, when the TV is switched into the

standby mode.

Wireless Display

Wireless Display is a standard for streaming video and

sound content by Wi-Fi

Alliance. This feature provides

the ability to use your TV as wireless display device.

Using with mobile devices

There are different standards which enable sharing of

screens including graphical, video and audio content

between your mobile device and TV.

3OXJWKHZLUHOHVV 86%GRQJOHWR79 ¿UVWLIWKH79

doesn’t have internal WiFi feature.

Then press the Source button on the remote and

switch to Wireless Display source.

A screen appears stating that the TV is ready for

connection.

Open the sharing application on your mobile device.

These applications are named differently for each

brand, please refer to the instruction manual of your

mobile device for detailed information.

Scan for devices. After you select your TV and

connect, the screen of your device will be displayed

on your TV.

Note: This feature can be used only if the mobile device

supports this feature. Scanning and connecting processes

English - 50 -

differ according to the programme you use. Android based

mobile devices should have the software version V4.2.2

and above.

Connectivity Troubleshooting

Wireless Network Not Available

(QVXUHWKDWDQ\¿UHZDOOVRI\RXUQHWZRUNDOORZWKH

TV wireless connection.

Try searching for wireless networks again, using the

Network/Internet Settings menu screen.

If the wireless network does not function properly, try

using the wired network in your home. Refer to the

Wired Connectivity section for more information on

the process.

If the TV does not function using the wired connection,

check the modem (router). If the router does not

have a problem, check the internet connection of

your modem.

Connection is Slow

See the instruction book of your wireless modem to get

information on the internal service area, connection

speed, signal quality and other settings. You need to

have a high speed connection for your modem.

Disruption during playback or slow

reactions

You could try the following in such a case:

Keep at least three meters distance from microwave

ovens, mobile telephones, bluetooth devices or any

other Wi-Fi compatible devices. Try changing the

active channel on the WLAN router.

Internet Connection Not Available / Audio

Video Sharing Not Working

,IWKH0$& DGGUHVVDXQLTXH LGHQWL¿HUQXPEHU RI

your PC or modem has been permanently registered,

it is possible that your TV might not connect to

the internet. In such a case, the MAC address is

authenticated each time when you connect to the

LQWHUQHW7KLV LV D SUHFDXWLRQ DJDLQVW XQDXWKRUL]HG

access. Since your TV has its own MAC address,

your internet service provider cannot validate the MAC

address of your TV. For this reason, your TV cannot

connect to the internet. Contact your internet service

provider and request information on how to connect

a different device, such as your TV, to the internet.

It is also possible that the connection may not be

available due to a firewall problem. If you think

this causes your problem, contact your internet

VHUYLFHSURYLGHU$¿UHZDOOPLJKWEHWKHUHDVRQRID

connectivity and discovery problem while using the

TV in Audio Video Sharing mode or while browsing

via Audio Video Sharing feature.

Invalid Domain

Ensure that you have already logged on to your PC

ZLWK DQDXWKRUL]HG XVHUQDPHSDVVZRUG DQG DOVR

ensure that your domain is active, prior to sharing

DQ\¿OHVLQ\RXUPHGLDVHUYHUSURJUDPRQ\RXU3&,I

the domain is invalid, this might cause problems while

EURZVLQJ¿OHVLQ$XGLR9LGHR6KDULQJPRGH

Using Audio Video Sharing Network Service

Audio Video Sharing feature uses a standard that

eases the viewing process of digital electronics and

makes them more convenient to use on a home

network.

This standard allows you to view and play photos,

music and videos stored in the media server

connected to your home network.

1. Server Software Installation

The Audio Video Sharing feature cannot be used if

the server programme is not installed onto your PC or

if the required media server software is not installed

onto the companion device. Please prepare your PC

with a proper server programme.

2. Connect to a Wired or Wireless Network

See the Wired/Wireless Connectivity chapters for

GHWDLOHGFRQ¿JXUDWLRQLQIRUPDWLRQ

3. Play Shared Files via Media Browser

Select Media Browser by using the directional

buttons from the main menu and press OK. The media

browser will then be displayed.

Audio Video Sharing

Select the desired media type on the main media

browser menu and press OK

,IVKDULQJFRQ¿JXUDWLRQV

are set properly, Device Selection screen will be

displayed after selecting the desired media type. If

available networks are found, they will be listed on

this screen. Select media server or network that you

want to connect to using the Up or Down buttons and

press OK. If you want to refresh the device list, press

the Green button. You can press Menu to exit.

If you select the media type as Videos and choose

a device from the selection menu. Then select the

IROGHUZLWKYLGHR¿OHVLQLWRQWKHQH[WVFUHHQDQGDOO

WKHDYDLODEOHYLGHR¿OHVZLOOEHOLVWHG

To play other media types from this screen, you can go

back to main Media Browser screen and select the

media type as desired and then perform the network

selection again. Or press the Blue button to switch to

next media type quickly without changing the network.

Refer to the Media Browser menu section for further

LQIRUPDWLRQRQ¿OHSOD\EDFN

If a problem occurs with the network, please switch

your television off at the wall socket and back on again.

Trick mode and jump are not supported with the Audio

Video Sharing feature.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Finlux FX50296S31Y2P LED televisie. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Finlux. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Finlux FX50296S31Y2P LED televisie in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Finlux LED televisies
Meer handleidingen voor LED televisies

Veelgestelde vragen over Finlux FX50296S31Y2P LED televisie

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Finlux 32HBD274B-NC LED televisie

Handleiding

Finlux 65FME249B-T LED televisie

Handleiding

Finlux FLF4337ANDROID LED televisie

Handleiding

Finlux 32HCD274B-N LED televisie

Handleiding

Finlux 48FPE304S-T LED televisie

Handleiding

Finlux 42FME242S-T LED televisie

Handleiding

Finlux FL4328CBU LED televisie

Handleiding

Finlux 32M80ECI-12 LED televisie

Gerelateerde categorieën