Handleiding Gardena 5000/5 Tuinpomp

Handleiding

3. Initial Operation

Setting up your Garden Pump: The site must be firm and solid in order to ensure safe and sturdy

operating conditions for the pump.

v Position the pump at a safe distance (min. 2 m) from the liquid

to be pumped.

The pump must be installed in a location with low air humidity

and sufficient ventilation in the area of the ventilation slots.

It must be at a distance of at least 5 cm from the walls.

No dirtcontamination (e.g. sand or earth) may be sucked in

through theventilation slots.

Connecting hose to

suction side:

2

1

Don’t use any hose connection system fittings on the

suction side! A vacuum-resistant suction hose must be used,

e. g. GARDENA Suction Unit, art. no. 1411.

In order to reduce the suction time, it is advisable to use a suction

hose with backflow preventer avoiding automatic draining of the

suction hose when the pump is stopped.

1. Screw a vacuum-resistant suction hose

1

airtight onto the

connector on the suction side of the pump

2

.

2. For suction heights exceeding 4 m also secure the suction

hose

1

(e.g. by fastening it to a wooden post).

This relieves the pump of the weight of the suction hose.

Connecting hose to

delivery side:

3

5

4z

The pumps have 2 connections

3

/

ß

3a

on the delivery side.

The pump connection not in use has to be closed by the cap

4

,

which can be unscrewed for connecting 2 hoses.

The pump connections

3

/

ß

3a

are equipped with a 33.3 mm (G 1")

thread which can be used to connect 13 mm (1/2"), 16 mm (5/8")

or 19 mm (3/4") hoses via the GARDENA hose connection system.

Optimised use of the pump capacity is achieved by connecting

19mm (3/4") hoses with e.g. GARDENA Pump Connection Set

Art.1752, or by connecting 25 mm (1") hoses with GARDENA

Quick Thread Coupling with female thread Art. 7109 / Quick

Coupling Hose Connector Art. 7103.

v Connect the pressure hose

5

to the connector on the delivery

side

3

/

ß

3a

.

If more than 2 hoses / accessories are connected simultaneously,

we recommend using the GARDENA 2- or 4-Channel Water

Distributor Art. 8193/8194, GARDENA Twin-Tap Connector

Art. 940 which can be screwed directly onto the connection

on the delivery side

3

/

ß

3a

.

4. Operation

Filling the pump:

1

6

7

8

5

min.

1 m

5

1

z

DANGER! Electric shock!

Risk of injury due to electric shock.

v Disconnect from the mains before filling the

Garden Pump.

ATTENTION!

v Before each operation, slowly fill the pump with liquid

to be pumped until it overflows (approx. 2 to 3 l).

1. Open the cap

6

on the filler neck

7

by hand.

2. Fill the pump via the filler cap

7

to overflowing with

approx. 2 to 3 l of the liquid to be pumped.

3. Tighten the cap

6

of the filler cap

7

by hand (do not use pliers).

4. Open any shut-off valves in the delivery line (accessories,

water stop, etc.).

5. Drain remaining water in pressure hose

5

so that air can

escape during the suction process.

6. Switching on pump 4000/5: Lift and hold the delivery hose

5

at least 1 m vertically above the pump, press the On/Off

switch

8

(On/Off switch shines) and wait until the pump has

primed.

v If the pump does not deliver after approx. 5 minutes,

switch off the pump (press On/Off switch

8

)

(see 7. Trouble-Shooting).

6. Switching on pump 5000/5; 6000/6 inox:

Lift and hold the delivery hose

5

at least

1 m vertically above the pump, insert the

power plug, press the On/Off button

ß

8a

(the LED shines green) and wait until the

pump has primed.

LED

If the pump does not deliver within

approx. 20 seconds, the LED flashes

orange.

If the pump does not deliver: 5000/5

within approx. 5 minutes / 6000/6 inox

within approx. 6 minutes, the LED

shines red and the pump switches off

automatically (see “7. Trouble-

Shooting”).

v If the pump does not automatically

switch off then manually switch

the pump off and check the hose

for leaks.

The specified maximum self-priming suction height of 8 m is

reached only if the pump is filled via the filler neck

7

up to the

overflow and if, while doing so and during the self-priming, the

delivery hose

5

is held up sufficiently high to prevent any flow

medium escaping from the pump via the delivery hose

5

.

14

GB

15

GB

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Gardena 5000/5 Tuinpomp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Gardena. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Gardena 5000/5 Tuinpomp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Gardena Tuinpompen
Meer handleidingen voor Tuinpompen

Veelgestelde vragen over Gardena 5000/5 Tuinpomp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Gardena 4000/5 Tuinpomp

Handleiding

Gardena 3500/4 Tuinpomp

Handleiding

Gardena 3000/4 Tuinpomp

Handleiding

Gardena 6000/6 Tuinpomp

Handleiding

Güde HWA 1100.1 VF Tuinpomp

Handleiding

Einhell GC-AW 6333 Tuinpomp

Handleiding

Kärcher BP 2 Garden Tuinpomp

Handleiding

Cotech GP800 Tuinpomp

Gerelateerde categorieën