-6- -7-
EN
EN
Protect the product from the effects of the elements. Do not set it up outdoors.
Only ever place the product on flat surfaces. If placed on an inclined surface,
water from the water tank may enter into the housing.
Make sure that the air inlet openings on the base of the product are knot
covered or sealed.
Aroma Diffuser Features
Mist
Press “ ” button.
* Press once: turns green indicator on, which is intermittent mist (mist every
30 seconds and pauses for 30 seconds).
* Press again: turns to blue indicator, and changes to continuous mist model.
* Press third time: power off.
Timer
1. First, choose your mist type between continuous mist (blue) or intermittent
mist (green) mode. Then press the Timer button repeatedly to set the desired
runtime.
2. The timer options are:
* Press once: 1-hour count down timer is set and corresponding LED(1H) will light
up.
* Press again: 2-hour count down timer is set and corresponding LED will
light up.
(2H)
* Press third time: 3-hour count down timer is set and corresponding LED
will light up.
(3H)
* Press fourth time: 4-hour count down timer is set and corresponding LED
will light up.
(4H)
* Press fifth time: turns count down timer off.
You can also turn on the timer by pressing the timer button first. By doing this,
the mist will only disperse in continuous mode. If you wish to set intermittent
mist mode, you must do so by pressing the mist button first and selecting
intermittent mist mode.
Note: Light and Timer function can be used at the same time.
Operation
Other Function
Anti-dry system: When there is no water or a little amount of water in the water
tank, the power supply will automatically and immediately turn off even with
power connected except for the light function, and the device will beep 6 times
as a warning.
1. Remove top cover (dia. 1).
2. Fill with distilled water to the maximum mark (120 ml) (dia. 2)
3. Add 2-3 drops fragrance oil (dia. 3).
4. Replace top cover while ensuring perfect fit (dia. 5).
5. Connect power supply unit (dia.6).
6. Place on a level surface (dia.7).
7. Switch on: Press “ ” button (dia.8).
The aroma diffuser is a modern fragrance diffuser which uses ultrasound
technology to generate a fine mist and thus distribute the fragrance
throughout the whole room. The aroma diffuser has the following functions:
NOTE: The top cover of the device consists of an inner cover and outer cover. The
inner and outer cover have been assembled together at our manufacturing facility
but it's possible, the inner cover has detached from the outer cover. If so, please
insert the inner cover back into the outer cover firmly (dia. 4 )before you place the
top half of the device back on the diffuser base. Otherwise, the diffuser will not
operate as intended.
LED Light
*
* Press again to stay on the current color.
* Press the LIGHT button repeatedly to select the desired color.
* Press and hold the LIGHT button for 3 seconds to turn off the light.
Note: Light and mist function can be used at the same time.
Press the LIGHT button once to automatically cycle through the different colors.
Praat mee over dit product
Laat hier weten wat jij vindt van de iTronics IT-01 Aromaverstuiver. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.