Handleiding Iwata SHRED-X SOHO Papiervernietiger

Handleiding

3

2

INSTALLATION

Paper Shredder

Operating Instructions

Installation

Operation

Maintenance

Troubleshooting

Service Center

Warning

Limited Warranty

Sheet Capacity

Paper Shred Size

Paper Entry Width

Credit Card Capacity

Voltage

8 Sheets of 20lb. bond paper*

7/32” x 1 27/32” pieces

(0.56 cm x 4.7 cm pieces)

8.7 in / 22.0 cm

1 at a time

220V~60Hz / 1 A

* ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER

Heavier paper, humidity or other than rate voltage may reduce capacity.

Mount the shredder securely to the rim of the waste basket. (FIGURE 1)

A socket-outlet should be near the equipment and be easily accessible.

Connect the power cord to any standard 220 volt AC outlet.

ATTENTION:

This model includes a built-in safety interlock mechanism, which requires the shredder to be correctly

mounted on to the included wastebasket. Located on the back center of the shredder

, next to the

power cord, there is a curved flap-like shape that must FIT OVER THE OUTSIDE matching ridge of

the wastebasket. (FIGURE #1) THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROPERLY

MOUNTED AS PICTURED!

It is not designed to operate with any other wastebaskets. An activation sensor located on the head unit

automatically shuts off the shredder when it is lifted or removed. The supplied wastebasket activates this

switch, which allows the shredder to be operable. Lining the wastebasket with a plastic bag will inter

fere

and may keep the shredder from functioning.

Caution: Crosscut shredders have

very sharp exposed blades on the underside.

Use care when mounting the shredder on the wastebasket.

OPERATION

AUTO / ON

:

This setting allows the shredder to be automatically started by inserting paper into the

shred opening. Always feed the paper in as straight as possible. When the paper has

passed through, the shredder will automatically stop. (FIGURE 2)

OFF

:

This setting turns off all features of the shredder. For safety reasons, we recommend that

you leave the shredder in the "Off" position whenever the shredder is unattended or not

in use. (FIGURE 2)

REV

(

REVERSE

):

In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters

of paper that has not passed through. Never attempt to clear a jam by using the reverse

function until you have emptied the wastebasket. (FIGURE 2)

READY

:

The green LED light indicates the shredder in “On” and ready for use.

I

O

R

FIGURE 3

ShredSafe™ technology is an added safety feature incorporated in this particular model. It is a new

technology where the shredder is able to detect forced entry and automatically cuts the power off, pre-

venting further shredding.

To begin shredding, locate the switch on the unit and select the “Auto” mode (FIGURE 2). The Green

LED light indicates the shredder is “On” and ready to use. Press the designated “push open” area on

the handle of the cover to tilt open and expose the paper feed slot (FIGURE 3).

The cover will click

into a preset position for safe shredding.* W ith the feed slot now open, you can shred sheets

of paper or 1 credit card per pass (FIGURE 3).

When shredding is completed, you can press the designated “push close” area on the cover to tilt shut

the paper feed slot (FIGURE 4). It is recommended to have the paper feed slot closed when shredder is

not in use. This will prevent any objects from getting into the feed slot and accidentally shredded.

*Be sure to not tilt open the cover completely beyond the preset position, otherwise

the ShredSafe™ power cut off feature will be activated and the shredder will be

inoperable.

CONTINUED NEXT PAGE

FIGURE 4

FIGURE 2

FIGURE 1

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Iwata SHRED-X SOHO Papiervernietiger. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Iwata. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Iwata SHRED-X SOHO Papiervernietiger in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Iwata Papiervernietigers
Meer handleidingen voor Papiervernietigers

Veelgestelde vragen over Iwata SHRED-X SOHO Papiervernietiger

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Iwata SHRED-X PRO Papiervernietiger

Handleiding

Iwata SHRED-X MAX Papiervernietiger

Handleiding

Iwata SHRED-X ELITE Papiervernietiger

Handleiding

Iwata SHRED-X ULTRA Papiervernietiger

Handleiding

Iwata SHRED-X MID Papiervernietiger

Handleiding

Iwata SHRED-X SMALL Papiervernietiger

Handleiding

Peach PS600-95 Papiervernietiger

Handleiding

United Office IAN 365280 Papiervernietiger

Gerelateerde categorieën