Handleiding Keurig K-Iced Essentials Koffiezetapparaat

Handleiding

Grounds in Your Coffee

Grounds may have gathered in the exit or entrance needles

and can be cleaned using a straightened paper clip or

similar tool.

• Clean the exit needle of the K-Cup® pod holder. Refer to the

exit needle care instructions.

• Clean the brewer entrance needle. Refer to the entrance

needle care instructions.

For optimal enjoyment and to limit grounds in your cup

during hot water brews or when transitioning from brewing a

coffee pod to a non-coffee pod (e.g., tea or cocoa), clean the

exit and entrance needles per the instructions provided and

perform two cleansing brews.

Brewer Will Not Brew

• The water level must be at the minimum line to brew. Add

an additional 2oz of water to the reservoir to ensure the

minimum fill level has been met, then press the brew size

button. Repeat until the brewer begins to dispense.

• Lift up and replace the reservoir to ensure a secure fit on

the base.

Brewing a Partial Cup

• BREW OVER ICE dispense volume includes ice melt.

The BREW OVER ICE setting automatically adjusts brew

parameters to take into account ice melt, delivering the

desired beverage with a final volume equal to the selected

brew size.

• Unplug the brewer and plug it back in to put the brewer in

idle state (all lights off). Press and hold the 10oz button for

5 seconds until water starts dispensing. Then release and

let the water purge. Discard the contents into the sink.

• The exit needle may be clogged. Refer to the exit needle

care instructions.

• Clean the K-Cup® pod holder; see K-Cup® pod holder care

instructions.

• The brewer may need to be descaled. If you have repeated

the descale procedure on your brewer two times and it is

still only brewing a partial cup, contact Customer Service.

Brewer Does Not Have Power or Shuts Off

• Brewer does not have a power button. To turn the brewer

on, press any button or open the handle. The brewer

automatically turns off after 5 minutes of inactivity.

• Plug brewer into its own outlet. If the electric circuit is

overloaded with other appliances, your brewer may not

function properly. The brewer should be operated on its

own circuit, separate from other appliances.

• If the brewer still doesn’t have power, contact

Customer Service.

Troubleshooting

Note: The full descaling procedure must be completed to turn

off the Descale light.

You will need: a large ceramic mug (10oz minimum), fresh

water, Keurig® Descaling Solution, and access to a sink.

Do not use a paper cup. Ensure that there is no beverage

pod in the K-Cup® pod holder. The descaling procedure takes

approximately 20 minutes.

STEP 1: Prepare the Brewer

Pour the entire bottle of Keurig® Descaling Solution into an

empty water reservoir.

Then fill the empty bottle with water and pour into the

water reservoir.

Do not insert a K-Cup® pod.

Place a large mug on the drip tray.

STEP 2: Descale the Brewer

To activate Descale Mode, begin with the brewer plugged in

and powered off, then press and hold the 6oz and 10oz buttons

together for 3 seconds.

When flashing, press the 8oz button to start the descaling

process.

Once the brew is complete, pour the hot liquid into the sink.

Continue to brew 8oz until the ADD WATER light illuminates.

STEP 3: Fresh Water Rinse

Empty the water reservoir and refill to the MAX FILL line

with fresh water.

When flashing, press the 8oz button to start the

rinsing process.

Once the brew is complete, pour the hot liquid into the sink.

Continue to brew 8oz until the DESCALE notification turns off.

The brewer has now exited Descale Mode and will be ready

for use!

NOTE: The cleaning action of Keurig® Descaling Solution may result in a “foam” dispensed

from the brewer. This is natural, as the solution is reacting with the scale inside. For a brewer

that is heavily scaled, the brewer may not fill properly after the descaler is added. If this

occurs, you may see little to no output dispensed, followed by the sound of air blowing out. If

this occurs:

• Turn off and unplug the brewer.

• If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse

the water reservoir thoroughly, and refill with water.

• Plug the brewer back in, power on, and repeat the Step 3 Fresh Water Rinse cycle.

The brewer should begin to function normally as the solution is rinsed out and the scale

is removed. If problem persists, allow brewer to sit unplugged for at least 30 minutes

before continuing with the rinse.

Descaling Procedure

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Keurig K-Iced Essentials Koffiezetapparaat. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Keurig. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Keurig K-Iced Essentials Koffiezetapparaat in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Keurig Koffiezetapparaten
Meer handleidingen voor Koffiezetapparaten

Veelgestelde vragen over Keurig K-Iced Essentials Koffiezetapparaat

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Keurig K-Cup K10 Mini Koffiezetapparaat

Handleiding

Keurig K450 Koffiezetapparaat

Handleiding

Keurig K-Supreme Smart Koffiezetapparaat

Handleiding

Keurig K-Supreme Koffiezetapparaat

Handleiding

Keurig K250 Koffiezetapparaat

Handleiding

Keurig K-Duo Plus Koffiezetapparaat

Handleiding

Keurig K-Express Koffiezetapparaat

Handleiding

Keurig K-Café Essentials Koffiezetapparaat

Gerelateerde categorieën