Handleiding Kichler 10303WHLED Lamp

Handleiding

Date Issued: 11/20/17 IS-10303LED-US

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

CAUTION – RISK OF SHOCK –

Disconnect Power at the main circuit breaker panel or main

fusebox before starting and during the installation.

7) Make wire connections. Reference chart below for correct

connections and wire accordingly.

8) Carefully push wire connections[3] back into outlet box making

sure all connections remain secure.

9) Push xture[1] over outlet box and align the four (4) holes in

the pan over the installed anchors and using the four screws[5]

secure the xture to the mounting surface.

10) Raise metal cover[6] up to the center of the xture pan center

and snap into place.

11) Place diffuser[2] up to the xture and tilting it up into place

making sure that the diffuser is securely in place.

Connect Black or Red

Supply Wire to:

Connect White Supply Wire to:

BlackWhite

*Parallel cord (round & smooth)

*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without Tracer

Clear, Brown, Gold or Black

with Tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wire (SPT I & SPT II)

are used. The neutral wire is square shaped or

ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

WARNING:

This xture is intended for installation in accordance with the

National Electrical Code (NEC) and all local code specications.

If you are not familiar with code requirements, installation by a

certied electrician is recommended.

CLEANING:

Always be certain that electric current is turned off before cleaning.

Only a damp cloth should be used. Harsh cleaning products may

damage the nish.

FCC INFORMATION:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1) This device may not cause harmful interference, and

2) this device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

INSTALLATION:

• Read and understand all instructions and illustrations

completely before proceeding with assembly and installation of

xture.

• If you have any doubts about how to install this xture, or if the

xture fails to operate completely, please contact a qualied

electrician.

• All parts must be used as indicated in the instructions. Do not

substitute any parts, leave parts out, or use any parts that are

worn or broken. Failure to obey this instruction could invalidate

the UL listing, C.S.A. certication, and/or ETL listing of this

xture.

• Fixture is to be connected to a single branch circuit.

• Mounting surface should be clean, dry, flat and 1/4” larger than

the xture housing surface.

INSTRUCTIONS:

1) Remove lens by tilting the diffuser[2] slightly and remove it

from the xture. Set aside. DO NOT touch LEDs with hands or

ngers.

2) Raise xture to surface to be mounted too and mark the

mounting surface through the four (4) mounting holes.

3) Lower xture from mounting surface and put aside.

4) Acquire a drill with a 1/8 inch drill bit and drill the four (4)

marked spots on the mounting surface.

5) Tap in the four (4) anchors[4]

6) Grounding instructions: (See Illus. A or B).

A) On xtures where mounting strap is provided with a hole

and two raised dimples. Wrap ground wire from outlet box

around green ground screw, and thread into hole.

B) On xtures where a cupped washer is provided. Attach

ground wire from outlet box under cupped washer and

green ground screw, and thread into mounting strap.

If xture is provided with ground wire. Connect xture ground

wire to outlet box ground wire with wire connector. (Not

provided.) After following the above steps. Never connect

ground wire to black or white power supply wires.

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

A

B

3

1

4

5

2

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Kichler 10303WHLED Lamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Kichler. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Kichler 10303WHLED Lamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Kichler Lampen
Meer handleidingen voor Lampen

Veelgestelde vragen over Kichler 10303WHLED Lamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Kichler 10795NILED Lamp

Handleiding

Kichler 15478CBR Lamp

Handleiding

Kichler 10755WHLED Lamp

Handleiding

Kichler 15384BKT Lamp

Handleiding

Kichler 15484AZT Lamp

Handleiding

Kichler 10784NILED Lamp

Handleiding

Kichler 10784OZLED Lamp

Handleiding

Kichler 11315OZLED Lamp

Gerelateerde categorieën