Handleiding Kichler 1897NI Eileen Lamp

Handleiding

18) Raise canopy to ceiling.

19) Secure canopy in place by tightening threaded ring onto

screw colla rloop.

20) Slip glass over sockets and secure in place with socket

rings.

CAUTION – RISK OF SHOCK – Disconnect Power at the main

circuit breaker panel or main fuse box before starting and during

the installation.

1) Pull supply wire up through center stem.

2) Screw center stem to top of fixture body.

3) Align threaded studs at ends of center column with holes in

fixture body.

4) Apply threaded locking compound the threaded studs.

5) Screw finials onto threaded studs.

6) Slip trim over threaded pipe protruding from bottom of

fixture and secure in place with finial.

7) Pass wire from fixture through stem and screw stem to

coupling at top of fixture.

NOTE: Thread locking compound must be applied to all stem

threads to prevent accidental rotation of fixture during cleaning,

relamping, etc.

8) Pass fixture wire through remaining stems and screw

together.

9) Attach small loop to last stem.

10) Take threaded pipe from parts bag and screw in screw collar

loop a minimum of 6 mm (1/4”). Lock into place with hexnut.

11) Run another hexnut down threaded pipe almost touching

first hexnut. Screw threaded pipe into mounting strap.

Mounting strap must be positioned with extruded thread

faced into outlet box. Threaded pipe must protrude out the

back of mounting strap. Connect mounting strap to outlet

box.

12) Unscrew the threaded ring from screw collar loop.Take

canopy and pass over screw collar loop. Approximately one

half of the screw collar loop exterior threads should be

exposed. Adjust screw collar loop by turning assembly up or

down in mounting strap. Remove canopy.

13) After desired position is found, tighten top hexnut up

against the bottom of the mounting strap.

14) Slip canopy over scre collar loop and thread on thread

ed ring. Attach chain (with fixture connected) to bottom of

screw collar loop. Unscrew threaded ring, let canopy and

threaded ring slip down.

15) Weave electrical wire and ground wire through chain

links no more than 3 inches apart. Pass wire through

threaded ring, canopy, screw collar loop, threaded pipe and

into outlet box.

16) Groundinginstructions:(SeeIllus.AorB).

A) On fixtures where mounting strap is provided with a hole

and two raised dimples. Wrap ground wire from outlet

box around green ground screw, and thread into hole.

B) On fixtures where a cupped washer is provided. Attach

ground wire from outlet box under cupped washer and

green ground screw, and thread into mounting strap.

If fixture is provided with ground wire. Connect fixture

ground wire to outlet box ground wire with wire connector

(not provided.) after following the above steps. Never

connect ground wire to black or white power supply wires.

17) Make wire connections (connectors not provided).

Reference chart below for correct connections and wire

accordingly.

GREEN GROUND

SCREW

CUPPED

WASHER

OUTLET BOX

GROUND

FIXTURE

GROUND

DIMPLES

WIRE CONNECTOR

OUTLET BOX

GROUND

GREEN GROUND

SCREW

FIXTURE

GROUND

A

B

Connect Black or

Red Supply Wire to:

Connect

White Supply Wire to:

Black White

*Parallel cord (round & smooth)

*Parallel cord (square & ridged)

Clear, Brown, Gold or Black

without tracer

Clear, Brown, Gold or Black

with tracer

Insulated wire (other than green)

with copper conductor

Insulated wire (other than green)

with silver conductor

*Note: When parallel wires (SPT I & SPT II)

are used. The neutral wire is square shaped

or ridged and the other wire will be round in

shape or smooth (see illus.)

Neutral Wire

Date Issued: 05/16/2017 IS-1897-CB

We’re here to help 866-558-5706

Hrs: M-F 9am to 5pm EST

MOUNTING STRAP

ÉTRIER DE MONTAGE

HEXNUT

ÉCROU HEXAGONAL

THREADED PIPE

TUBE FILTÉ

CANOPY

COUVERCLE

THREADED RING

BAGUE FILETÉE

SCREW COLLAR LOOP

BOUCLE DU COLLIER

À VIS

FIXTURE BODY

CORPS DU LUMINAIRE

STEM

TIGE

CENTER STEM

TIGE CENTRALE

SOCKET RING

ANNEAU DE DOUILLE

GLASS

VERRE

THREADED STUD

GOUJON FILETÉ

FINIAL

ORNEMENT

SMALL LOOP

PETITE BOUCLE

CENTER COLUMN

COLONNE CENTRALE

SEE OTHER SIDE FOR CANADIAN FRENCH TRANS-

LATIONS.

VOIR L’AUTRE CÔTÉ POUR LES CANADIENS TRA-

DUCTIONS EN FRANÇAIS.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Kichler 1897NI Eileen Lamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Kichler. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Kichler 1897NI Eileen Lamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Kichler Lampen
Meer handleidingen voor Lampen

Beoordeling

Veelgestelde vragen over Kichler 1897NI Eileen Lamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Kichler 16019AZT27 VLO Lamp

Handleiding

Kichler 12602WH Shielded Lamp

Handleiding

Kichler 15205AZT Three Lamp

Handleiding

Kichler 15194AZ Enclosed Lamp

Handleiding

Kichler 16020AZT27 VLO Lamp

Handleiding

Kichler 15609BKT Junction Lamp

Handleiding

Kichler 10885NILED Ceiling Lamp

Handleiding

Kichler 15608AZ In Lamp

Gerelateerde categorieën