Handleiding Logik L20CHTW18 Kachel

Handleiding

IB-L20CHTW18-200605V3

Thank you for purchasing your new product.

We recommend that you spend some time reading this instruction manual in order that

you fully understand all the operational features it oers.

Read all the safety instructions carefully before use and keep this instruction manual for

future reference.

2kW Convector Heater

Instruction Manual

L20CHTW18

This product is only suitable for well-insulated spaces or occasional use.

Product Overview

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so

according to local regulations.

The following items are included:

• Main Unit

• Foot x 2

• Screw x 4

Assembly

Before using the heater, the feet (supplied) must be tted to the unit.

Attach the feet to the base of the heater using the screws provided (2

for each foot), taking care to ensure that they are located correctly in the

bottom ends of the heater’s side.

Heat Operation

Position the heater upright on the oor away from curtains, furniture or wall coverings before

plugging your heater into the mains socket.

• Press the Power Switch to the “750W” or “1250W” position, the indicator will illuminate

when the heating element is ON. For maximum heat output, press both Power Switch.

• Turn the Thermostat Control to the desired position. It is recommended to select the “MAX”

position to get the heater to pre-heat. It will take 5-10 minutes for the heater to fully heat up.

• When the room reaches the desired temperature, turn the Thermostat Control slowly anti-

clockwise until the indicator goes o and the thermostat “click o” sound is heard.

• After this, the heater will keep the air temperature in the room at the set temperature

by switching on and o automatically. If the room temperature falls below the desired

temperature, the heater and indicator will turn on again until the room temperature reaches

the desired temperature.

Fit the screws in the

adjacent position

• If items are missing or damaged, please contact Partmaster (UK only).

• Tel: 0344 800 3456 for assistance.

It is normal for the heater to emit some smell and fumes when it is turned on for the

rst time or when turned on after not being used for a long period of time. This smell

will disappear when the heater has been turned on for a short while.

Handle

Power Switch

Timer Control

Thermostat Control

Fan Switch

Air Outlet

Fan Operation

• To blow warm air, turn the Thermostat Control to turn on the thermostat setting and press

the Power Switch to turn on the heating elements. Then press the Fan Switch.

• To blow cool air, turn o the thermostat and heating elements, then press the Fan Switch.

Timer Operation

The heater is tted with a 24-hour timer, which has 96 segments around its

circumference. Each segment is equivalent to 15 minutes of time. You may

preset the time and duration of the 24-hour period(s) as per your preference

in any 24-hour period.

1. Set the current time by turning the Outer Ring of the Timer Control

until the Pointer points to the current time, e.g. the gure shows the

current time is 10:30 a.m.

2. Select your preferred segments, and pull them outward for heater ON

time and inward for heater OFF time.

3. Push the Slide Switch to “

” position to start the timer. The timer will

start and the Timer Control will turn automatically. The stopwatch icon

will start turning when the timer is activated. (To switch o the timer,

push the Slide Switch to “I” position.)

4. Select your preferred power and thermostat setting.

Once the timer’s Pointer reaches the heater ON time of the selected

segments, it will switch the heater on. The unit will turn o at the end of the

selected segments.

• Make sure the heater is plugged into a power socket for the

timer to work.

• When using in timer mode, due consideration should

be given to the fact that the heater may turn on whilst

unattended.

• If the Slide Switch is set at “0" position, the heater will not

work.

Timer Control

24 HOUR FULLY

Programmable Timer

Timer Control

24 HOUR FULLY

Programmable Timer

I

Timer Control

24 HOUR FULLY

Programmable Timer

I

Cleaning

Your heater should be cleaned regularly to prevent dirt and dust from building up which will

aect its performance. Ensure the air inlet and the air outlet are not blocked.

This can be done with a vacuum cleaner, using the brush attachment.

• Ensure you unplug your heater from the mains socket and wait for the heater to

cool down completely before cleaning.

• Do not use any detergents or abrasives and do not allow any water to enter the

heater.

L20CHTW18_IB_Final200605V3.indd 1-3 05/06/2020 12:26

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Logik L20CHTW18 Kachel. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Logik. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Logik L20CHTW18 Kachel in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Logik Kachels
Meer handleidingen voor Kachels

Beoordeling

Veelgestelde vragen over Logik L20CHTW18 Kachel

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Logik L20CTH11 Kachel

Handleiding

Logik L10ORW13E Kachel

Handleiding

Logik L20PTC23 Kachel

Handleiding

Logik L20PTC16E Kachel

Handleiding

Logik L20ORW14E Kachel

Handleiding

Logik L20THW22 Kachel

Handleiding

Logik L15OFR15 Kachel

Handleiding

Logik L20CHTW21 Kachel

Gerelateerde categorieën