→
→
MinutesHour
4.Press button “D” to set the digits. One
digit is advanced with each press of the
button. The digits move quickly by keeping
the button pressed.
5.After all the adjustments are completed,
press button “A” to return to the REGULAR
ALARM mode. A beep sounds for 1 second.
1.Press button “A” to show the REGULAR
ALARM mode.
2.Press button “A” for 2 to 3 seconds to
show the regular alarm setting display. A
beep sounds for 1 second, and the hour
digits start flashing.
3.Press button “C” to select the digits to be
adjusted (flashing).
Engagement/disengagement of the
regular alarm and hourly time signal
■ DEMONSTRATION FUNCTION
1.Press button “D” for 2 to 3 seconds in the
TIME/CALENDAR mode to activate the
demonstration function.
2.The modes and displays are shown for 2
seconds automatically in the following order.
→
→
Calendar
display
Time/calendar
display
Stopwatch
mode
Blank
display
→
Regular
alarm mode
→
→
→
Timer
mode
3.To deactivate the demonstration function,
press any of the buttons. The watch returns
to the TIME/CALENDAR mode.
■ LUMIBRITE WATCH
(dial, hands, buttons, case, bezel,
strap, etc.)
✩ If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light sources
and emit light in the dark. They are made of
environmentally friendly material, and therefore,
are harmless to human beings and the environment.
• With a full charge, LORUS LUMIBRITE watches
glow in the dark hours longer than conven-
tional luminous watches of this type. If ex-
posed to a light of more than 500 lux (i.e., the
brightness of a typical office) for approximately
10 minutes, or direct sunlight for 2 minutes,
they will glow for hours.
• Since LORUS LUMIBRITE watches emit the
light they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and distance
from the light source used to charge the watch.
• With each press of button “C” in the REGULAR
ALARM mode, the engagement and disengagement
of the regular alarm and hourly time signal
are made as follows.
1
2
Hourly time
signal mark
Neither engaged
Both engaged
Hourly time signal engaged
Alarm engaged
Alarm mark
3
4
• At the designated time, the alarm rings for
20 seconds and stops. To stop it manually,
press any of the buttons.
• The alarm can be tested by keeping button
“C” pressed in the REGULAR ALARM mode.
Notes:
1.When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2.When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. Only “PM” mark is displayed and
there is no indication for the AM setting.
In the 24-hour indication, “24H” is displayed.
■ ILLUMINATING LIGHT
• When button “B” is pressed and released
in any of the modes and displays, the light
illuminates the display for 3 seconds for
easy viewing in the dark. The display remains
illuminated if button “B” is kept pressed.
• When button “B” is pressed in the calendar
or blank display of the TIME/CALENDAR
mode, the time/calendar is shown while
the display is illuminated.
■ ViViDiGi
Note: If the alarm is used for more than 10
seconds a day and/or the illuminating
light for more than once (for 3 seconds)
a day, the battery life may be less than
the specified period.
■ BATTERY CHANGE
The miniature lithium batteries SONY SR626SW
for analogue display and SONY SR41W for
digital display,which power your watch should
last approximately 2 years. However, because
they are inserted at the factory, the actual
life of the batteries once in your possession
may be less than the specified period. Be
sure to replace the batteries to prevent any
possible malfunction as soon as they run down.
To replace the batteries, we recommend taking
the watch to a local watch repair shop.
■ CARE OF YOUR LORUS WATCH
• BATTERY
• WATER RESISTANT
B
No
indication
WATER
RESISTANT
WATER
RESISTANT
(50 M/5 BAR)*
WATER
RESISTANT
100 M/
10 BAR or
above
Condition
of use
Accidental
contact with
water, such
as splashes
and rain
Swimm-
ing and
taking a
shower
Skin
diving
Scuba
diving
Indica-
tion on
the dial/
case back
NO
NO NO NO
YES
YES NO NO
YES NO NO NO
YES YES YES NO
()
*
CAUTION
Do not expose the old battery to
fire or recharge it. Keep it at a
place beyond the reach of chil-
dren. If a child swallows it, consult
a doctor immediately.
ViViDiGi is a new type of liquid crystal panel that
makes possible various colors and high contrast.
• Excellent light reflection and transmission make
the display bright and clear.
• Various color options are available.
• Either the whole panel or the displayed data
only can be illuminated.
* Features vary in different models.
Praat mee over dit product
Laat hier weten wat jij vindt van de Lorus NX03 Uurwerk. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.