Handleiding Makita PLM4622N2 Grasmaaier

Handleiding

12

The recommended cut for mulching is 1/3 the length of the

grass. Ground speed will need to be adjusted so the

clippings can be dispersed evenly into the lawn. For

especially heavy cutting in thick grass it may be necessary

to use one of the slowest speeds in order to get a clean

well mulched cut. When mulching long grass you may have

to cut the lawn in two passes, lowering the blade another

1/3 of the length for the second cut and perhaps cutting in a

different pattern than was used the first time.

Overlapping the cut a little on each pass will also help to

clean up any stray clippings left on the lawn. The mower

should always be operated at full throttle to get the best

cut and allow it to do the most effective job of mulching.

Clean underside of deck.

Be certain to clean the underside of the cutting deck after

each use to avoid a build-up of grass, which would

prevent proper mulching. Mulching leaves. The mulching

of leaves can also be beneficial to your lawn. When

mulching leaves make sure they are dry and are not

laying too thick on the lawn. Do not wait for all the leaves

to be off the trees before you mulch.

WARNING: If you strike a foreign object, stop the

engine. Remove wire from spark plug, thoroughly inspect

the mower for any damage and repair the damage before

restarting and operating the mower. Extensive vibration of

the mower during operation is an indication of damage.

The unit should be promptly inspected and repaired.

7-7 GRASS CATCHER

Empty and clean the bag, make sure it is clean and

ensure its meshwork is ventilated. (Fig. 22)

7-8 DECK

The underside of the mower deck should be cleaned after

each use to prevent a buildup of grass clippings, leaves,

dirt or other matter. If this debris is allowed to accumulate,

it will invite rust and corrosion, and may prevent proper

mulching. The deck may be cleaned by tilting the mower

and scraping clean with a suitable tool (make certain the

spark plug wire is disconnected).

7-9 HEIGHT ADJUSTMENT

INSTRUCTIONS

CAUTION: Do not at any time make any

adjustment to lawn mower without first stopping the

engine and disconnecting the spark plug wire.

CAUTION: Before changing mowing height, stop

mower and disconnect spark plug cable.

Your mower is equipped with a central height adjustment

lever offering 5 height positions.

1. Stop mower and disconnect spark plug cable before

changing mower cutting height.

2. The central height adjustment lever offers you

5 different height positions.

3. To change the height of cut, squeeze adjuster lever

toward the wheel, moving up or down to selected

height. (Fig. 23) All wheels will be in the same height

of cut.

8. MAINTENANCE

INSTRUCTIONS

SPARK PLUG

Use only original replacement spark plug. For best results,

replace the spark plug every 100 hours of use. (refer to

ENGINE OWNER’S MANUAL)

BRAKE PADS

Check and/or replace the engine brake pads in service

agent regularly, only original parts can be used as

replacement.

9. LUBRICATION INSTRUCTIONS

CAUTION: DISCONNECT SPARK PLUG

BEFORE SERVICING.

1. WHEELS-Lubricate the ball bearings in each wheel at

least once a season with a light oil.

2. ENGINE-Follow engine manual for lubrication

instructions.

10. CLEANING

CAUTION: Do not hose engine. Water can

damage engine or contaminate the fuel system.

1. Wipe deck with dry cloth.

2. Hose under deck by tilting the mower so that the spark

plug is up.

10-1 ENGINE AIR CLEANER

CAUTION: Do not allow dirt or dust to clog the air

filter foam element.

The engine air cleaner element must be serviced

(cleaned) after 25 hours normal mowing. The foam

element must be serviced regularly if the mower is used in

dry dusty conditions. (refer to ENGINE OWNER’S

MANUAL)

To CLEAN AIR FILTER

1. Lift the tab on the filter cover. (Fig. 24)

2. Remove the filter cover.

3. Wash filter element in soap water. DO NOT USE

GASOLINE!

4. Air dry filter element.

5. Place a few drops of SAE30 oil on the foam filter and

squeeze tightly to remove any excess oil.

6. Reinstall filter.

7. Close the filter cover.

NOTE: Replace filter if frayed, torn, damaged or

unable to be cleaned.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Makita PLM4622N2 Grasmaaier. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Makita. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Makita PLM4622N2 Grasmaaier in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Makita Grasmaaiers
Meer handleidingen voor Grasmaaiers

Veelgestelde vragen over Makita PLM4622N2 Grasmaaier

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Makita PLM5600N2 Grasmaaier

Handleiding

Makita DLM462 Grasmaaier

Handleiding

Makita PLM4621N2 Grasmaaier

Handleiding

Makita BLM381 Grasmaaier

Handleiding

Makita DLM532 Grasmaaier

Handleiding

Makita PLM5130 Grasmaaier

Handleiding

Makita ELM4110 Grasmaaier

Handleiding

Makita LM001CT4X4 Grasmaaier

Gerelateerde categorieën