Handleiding McCulloch EB356a Kettingzaag

Handleiding

3-1. TOOLS FOR ASSEMBLY (YOUR SAW

WAS ASSEMBLED AT THE FACTORY)

Y

ou will need these tools to assemble your chain saw:

1. Combination wrench-screwdriver (contained in your

user’

s kit or in lid of carry case).

2. Heavy duty work gloves (user supplied).

3-2. ASSEMBLY REQUIREMENTS

Your new chain saw will require adjustment of chain, filling

the fuel tank with correct fuel mixture and filling the oil tank

with lubricating oil before the unit is ready for operation.

WARNING

DO NOT start saw engine until unit is properly prepared.

Read the entire user manual before attempting to operate

your unit. Pay particular attention to all safety precautions.

Your user manual is both a reference guide and handbook

provided to furnish you with general information to assem-

ble, operate and maintain your saw.

3-3. GUIDE BAR / SAW CHAIN / CLUTCH

COVER INSTALLATION

WARNING

Always wear protective gloves when handling chain.

TO INSTALL GUIDE BAR:

CAUTION

To ensure the bar and chain receive oil, ONLY USE THE

ORIGINAL STYLE BAR with the oil passage hole (A) as

illustrated above (Figure 3-3A).

1. Make sure the CHAIN BRAKE

®

lever is pulled back

into the DISENGAGED position (Figure 3-3B)

2.

Remove the bar retaining nuts (B). Remove clutch

cover (C) by pulling straight out, some force may be

required. (Figure 3-3C)

NO

TE

:

Discard the tw

o plastic w

ashers

.

They are only used

for shipping the chain saw.

3. Using a screwdriver or the wrench supplied in the

user’s kit or in the upper half of the carrying case.Turn

the adjustment scre

w (D) COUNTERCLOCKWISE

until the TANG (E) (projecting prong) is to the end of

its travel (Figure 3-3D).

4.

Place the slotted end of the guide bar o

v

er the bar bolt

(F).

Slide guide bar behind clutch dr

um (G) until the

guide bar stops (Figure 3-3E).

THE PUSH (PINCH-KICKBACK) AND PULL

REACTIONS (Figure 2-4B)

A = Pull

B = Solid objects

C = Push

KICKBACK may occur when the NOSE or TIP of the guide

bar touches an object, or when wood closes in and pinch-

es the saw chain in the cut.

Tip contact in some cases may cause a lightning-fast

reverse reaction, kicking the guide bar up and back toward

the operator.

PINCHING the saw chain along the BOTTOM of the guide

bar may PULL the saw forward away from the operator.

PINCHING the saw chain along the TOP of the guide bar

may PUSH the guide bar rapidly back toward the operator.

Any of these reactions may cause you to lose control of the

saw, which could result in serious personal injury.

2-5. KICKBACK SAFETY LABELS

Your McCulloch Chain Saw is provided with a safety label

located on the chain brake lever. This label, along with the

safety instructions on these pages, should be carefully read

before attempting to operate this unit.

HOW TO READ SYMBOLS AND COLORS:

WARNING

Used to warn that an unsafe procedure should not be per-

formed.

RECOMMENDED

Recommended cutting procedures.

WARNING (Figure 2-5A)

1. Worst-case computed kickback angle.

2. Beware of kickback.

3. Do not attempt to hold saw with one hand.

4. Avoid bar nose contact.

RECOMMENDED

5. Hold saw properly with both hands.

GREEN

RED

2-4B

A

C

B

B

6 7

The engine exhaust from this product contains chemi-

cals known to the State of California to cause cancer,

birth defects, or other reproductive harm.

WARNING

2-5A

2-6. INTERNATIONAL SYMBOLS

Wear head, eye and hearing protection.

Wear gloves to protect your hands.

Wear safety boots to protect against electric shock.

Read User Manual.

Use of these personal safety items is

highly recommended to reduce the risk

of accidental injur

y.

2 - SAFETY PRECAUTIONS

A

3-3A

3 - ASSEMBLY INSTRUCTIONS

3-3B

3-3C

C

B

3-3D

D

E

3-3E

G

F

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je McCulloch EB356a Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met McCulloch. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van McCulloch EB356a Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor McCulloch Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over McCulloch EB356a Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

McCulloch MXC1640DK Kettingzaag

Handleiding

McCulloch CSE 2040S Kettingzaag

Handleiding

McCulloch M4218 Kettingzaag

Handleiding

McCulloch CS 360T Kettingzaag

Handleiding

McCulloch Mac 540E Kettingzaag

Handleiding

McCulloch MCC3516F Kettingzaag

Handleiding

McCulloch CS 410 Elite Kettingzaag

Handleiding

McCulloch MXC1640D Kettingzaag

Gerelateerde categorieën