Handleiding Milwaukee 2101-22 Schroefmachine

Handleiding

3

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging

improperly or at temperatures outside the specied

range may damage the battery and increase the risk

of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

CORDLESS SCREWDRIVER

• Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

“live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

• Keep hands away from all cutting edges and

moving parts.

•

WARNING

To reduce the risk of injury, when

working in dusty situations, wear

appropriate respiratory protection or use an

OSHA compliant dust extraction solution.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lum-

ber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

C

US

UL Listing for Canada and U.S.

SPECIFICATIONS

Cat. No. ..................................................... 2101-20

Volts ................................................................ 4 DC

No Load RPM ...........................Low 200 High 600

Battery Type ...................................................M4™

Charger Type ..................................................M4™

Recommended Ambient

Operating Temperature ......................0°F to 125°F

FUNCTIONAL DESCRIPTION

3

1

2

4

7

1. Bit holder collar

2. Clutch adjusting ring

3. Speed selector

4. Lock switch

5. Fuel Gauge

6. Handle

7. Forward/reverse switch

5

6

ASSEMBLY

WARNING

Recharge only with the charger

specied for the battery. For spe-

cic charging instructions, read the operator’s

manual supplied with your charger and battery.

Inserting the Battery into the Tool

1

Slot

Tab

Line

Lock

2

Line up the tabs on the battery with the slots in the

tool opening. Slide the battery all the way into the

tool. Turn the battery clockwise to lock it in place.

The line on the battery will line up with the on the

tool. The tool will not run if the battery is not properly

locked into the tool.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Milwaukee 2101-22 Schroefmachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Milwaukee. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Milwaukee 2101-22 Schroefmachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Milwaukee Schroefmachines
Meer handleidingen voor Schroefmachines

Veelgestelde vragen over Milwaukee 2101-22 Schroefmachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Milwaukee 2101-21 Schroefmachine

Handleiding

Milwaukee 2667-20 Schroefmachine

Handleiding

Milwaukee 6790-20 Schroefmachine

Handleiding

Milwaukee 2401-22 Schroefmachine

Handleiding

Milwaukee 6740-20 Schroefmachine

Handleiding

Milwaukee 2853-20 Schroefmachine

Handleiding

Milwaukee 6742-20 Schroefmachine

Handleiding

Milwaukee 2866-22CT Schroefmachine

Gerelateerde categorieën