7 GB/IE/NI
This product may be used by children aged 8
years and up, as well as by persons with reduced
physical, sensory or mental capacities or lacking
experience and knowledge, so long as they are
supervised or instructed in the safe use of the
product and understand the associated risks.
Do not allow children to play with the product.
Cleaning and user maintenance must not be
performed by children without supervision.
CAUTION! RISK OF INJURY! Make sure
that all parts are undamaged and correctly as-
sembled. Improper installation may result in in-
jury. Damaged parts could impact safety and
function.
Installation must be performed by skilled persons.
RISK OF WATER DAMAGE! Shut off the
main water supply prior to installation.
Ensure all seals are seated correctly.
This product is not suitable for use with
low-pressure tanks and open (non-pressurised)
electrical storage heaters.
Only use the product in rooms with tempera-
tures above 0 °C. In case of potential frost, shut
off the water supply and drain the product.
Careful when adjusting the water
temperature: risk of scalding!
Incorrectly installed hand shower sets can
cause water damage!
Please note that the seals are wear parts and
must be changed from time to time.
Even careful production can result in sharp edges.
Therefore proceed with caution during installa-
tion.
Before attaching the product to the wall, check
which mounting materials are suitable for your
wall. We have supplied mounting materials
suitable for an ordinary solid masonry wall.
RISK OF WATER DAMAGE! Before drilling,
ensure that there are no water pipes where you
intend to drill.
RISK OF ELECTRIC SHOCK! Before drilling,
ensure that there are no electrical cables
where you intend to drill.
Installation
Note: carefully check all connections for leaks
after first use.
Note: incorrect installation will void the warranty,
particularly with respect to consequential damage!
Screw the bottom bar
1b
anti-clockwise into the
top bar
1a
(see Fig. B).
Place the collar
16b
over the retainer
16c
(see
Fig. C).
Unscrew the hexagon socket screw
11c
from the
side shelf
11
, turning anti-clockwise. This step
requires a hex key (not included). Then remove
the mounting plate
11b
(see Fig. D).
First slide the wall bracket
16
, then the hand
shower bracket
15
onto the
1
bar from below.
Then attach the side shelf
11
to the bottom end
of the bar
1
(see Fig. E).
Position both mounting plates
11b
,
16a
in the
desired location on the wall and mark the
bores. Now drill the fixing holes. Then insert
the rawlplugs
12
in the bores. Secure both
mounting plates
11b
,
16a
with the screws
13
(see Fig. F).
Mark the locations for the bores for the brackets
below the shelf
11a
. Now drill the fixing holes.
Then insert the rawlplugs
12
in the bores and
install the screws
13
.
Attach the side shelf
11
to the mounting plate
11b
. Secure the side shelf
11
, tightening the
hexagon socket screw
11c
anti-clockwise (see
Fig. G).
Attach the retainer with the collar
16b
16c
to
the mounting plate
16a
and tighten, turning
clockwise (see Fig. H).
Insert one flat seal
9
each into the shower
hose
10
and into the connection hose
14
.
Then connect both shower hoses to the connec-
tions on the side shelf
11
, turning clockwise
(see Fig. I).
Attach one flat seal
9
to the other end of the
connection hose
14
. Then connect it hand-tight
to your water supply (see Fig. J).
Check all connections by opening the water
supply for 2 minutes (see Fig. K).
Praat mee over dit product
Laat hier weten wat jij vindt van de Miomare IAN 288801 Douchekop. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.