Handleiding NiteRider Lumina Micro 220 Fietslamp

Handleiding

Lumina Micro 220

User Guide

DISCOVER THE NIGHT

Thank you for choosing the Lumina

Micro 220 from NiteRider, the

innovator in technical lighting systems.

The Lumina Micro 220 combines a

self contained, high-powered, white

LED headlamp with a rechargeable,

replaceable Lithium Ion battery. To get

the most from your NiteRider light, we

urge you to familiarize yourself with

the following safety and operating

instructions.

PARTS LIST AND IDENTIFICATION

Please verify the contents of your

Lumina system:

A. Lumina Micro 220 Headlamp

B. Lumina Handlebar Mount

C. Lumina Handlebar Mount Shim

D. USB Charging Cable

OPERATION

1. The light has 5 modes - low, medium and

high beam - daylight ash mode and walk

mode. Press and release the headlamp

power button to turn the light on. Cycle

through the three brightness levels by

pressing and releasing the power button.

2. To access the daylight visible ash mode,

press and hold the power button for greater

than 3 seconds or until the headlamp begins

to ash.

3. With the headlamp in ash mode, press

and release the power button to access walk

mode. From walk mode you can return to

normal mode by pressing and releasing the

power button.

4. To turn the light o from either normal,

ash, or walk mode, press and hold the

power button until the light turns o.

5. Like the other Lumina Series models, the

Lumina Micro 220 comes equipped with a “lock”

mode. Always put the light into lock mode during

transport of the headlamp in order to prevent

accidentally turning the headlamp on. To put the

headlamp in lock mode, press and hold the power

button for several seconds until the headlamp

turns off and continue holding the power button

down through ash mode until the power button

turns or ashes red. Then let go of the Power

button and test to make sure the light is in lock

mode by tapping the power button. The light will

not turn on if the lock mode is engaged.

RIDING AT NIGHT

While a Lumina Micro 220 lighting system

will improve your view, control and

enjoyment of night riding, please remember

that cycling at night is an inherently

dangerous activity. In addition to using your

lighting system properly and riding with

extreme caution, NiteRider urges you to:

• Never ride alone.

• Always let someone know where you

are going.

• Wear a helmet and reective clothing.

• Carry an auxiliary light and emergency

supplies.

• Make sure the headlamp & mounting

bracket is securely fastened.

IMPORTANT INFORMATION!

LOCK THE HEADLAMP FOR TRANSIT

It is important to lock the headlamp and

protect the switch from being pressed

while it is in transit. The headlamp can be

easily turned on if placed in something like

a backpack, duel bag or suitcase. The

headlamp gets hot while in operation. To

prevent potential damage from high heat

or even re, it is very important to put the

headlamp in lock mode and protect the

switch from being pressed.

NiteRider will not be held responsible for

damages to person or property resulting

from a failure to follow the ‘lock’ mode

instructions.

6. To unlock the headlamp, press and hold the

power button for several seconds until the power

button turns, or ashes blue. Release the power

button.

A. B.

C.

D.

Release Lever

Hinge

Knob

Turn the knob counter-

clockwise, allowing the hinge

to swing open. Place the

mount on the handlebar

on the either side of the

stem.

150-23220

Swing the hinge down

to make contact with the

handlebar. Swing the hex

bolt up, seating the knob

into its recess. Turn the

knob clockwise to tighten

and secure the mount to

the handlebar.

Aim the

headlamp by

swiveling the

headlamp

back

and forth.

MOUNTING

The Lumina Handlebar Mount is designed to

t on virtually any handlebar.

Remove the headlamp from the mount by

pressing down on the release

lever and sliding the headlamp

o of the mount towards the

release lever.

LOW BATTERY INDICATOR

With approximately 15 - 20% battery

capacity remaining, the indicator LED on the

headlamp will turn from blue to red.

RESERVE MODE

Reserve Mode will automatically shift your

light to low beam when the battery is very

low and about to cut o. Once reserve

mode starts you will only be able to use Low

Beam, Flash Mode and Walking Mode. High

Beam and Medium Beam will be disabled.

BATTERY CHARGING AND CARE

1. Plug the micro USB side of the USB

charging cable into the Lumina Micro

220 charging port and the other into your

computer.

2. The LED charging indicator on the Lumina

Micro 220 will remain red until the battery

is fully charged; once charged it will then

switch to blue.

3. Leaving the headlamp and USB charging

cable connected indenitely will not harm

the battery.

4. When storing for an extended period of

time, charge the battery every 4-6 weeks to

maximize battery life.

PROTECTING YOUR INVESTMENT

Properly charge your battery to maximize

its lifespan. (See the “Battery Charging and

Care” section for detailed information)

The Lumina Micro 220 will perform in wet

weather conditions, but submerging it in

water will damage the system.

SUPPORT

If you experience diculties during product

installation or operation, NiteRider provides

free telephone support on weekdays from

8:00 AM to 4:30 PM (Pacic Time) at

800.466.8366, ext 4. You may also e-mail us

at support@niterider.com.

WARRANTY

NiteRider stands behind its products with the

following warranties:

•Lifetime warranty on all mechanical

components

•2 years on electrical components

•1 year on rechargeable batteries

To obtain warranty service, it is preferable

to have your original sales receipt. Contact

the NiteRider customer service department

at 800.466.8366, ext 4 to obtain a Return

Merchandise Authorization (RMA) number.

The RMA number must be prominently

displayed on the outside of your package.

The product must be properly packaged to

prevent damage in transit. For complete

warranty information, please visit our website

at www.niterider.com.

The Lumina Micro 220 will run up to:

RUN TIMES

Light Level

High

Med

Low

Walk

Time*

1:30

2:45

4:00

14:00

Lumens

220

120

80

15

*Run times are approximations and will vary.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je NiteRider Lumina Micro 220 Fietslamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met NiteRider. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van NiteRider Lumina Micro 220 Fietslamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor NiteRider Fietslampen
Meer handleidingen voor Fietslampen

Beoordeling

Gerelateerde producten

Handleiding

NiteRider MiNewt 350 Cordless Fietslamp

Handleiding

NiteRider Classic Plus Fietslamp

Handleiding

NiteRider Pro 2800 Enduro Remote Fietslamp

Handleiding

NiteRider Pro 3600 Fietslamp

Handleiding

NiteRider Pro 1400 Race Fietslamp

Handleiding

NiteRider MiNewt 250 Cordless Fietslamp

Handleiding

NiteRider TriNewt Fietslamp

Handleiding

NiteRider Lumina OLED 800 Fietslamp

Gerelateerde categorieën