Handleiding Oregon RAR601 Wekker

Handleiding

�

2

3

4

5

1

MODE

MEM

� � ��� � ��� �� � �� ���

�

�

1

2

3

7

6

5

4

8

INTRODUCTION

Thank you for selecting the Oregon Scientifictm Wireless

Thermometer & Alarm Clock (RAR601). This device bundles

alarm clock and temperature monitoring features into a single

tool you can use from the convenience of your home.

In this box, you will find:

• Main unit

• Remote sensor

• 2 x UM-4 (AAA) 1.5V alkaline batteries (main unit);

2 x UM-3 (AA) 1.5V alkaline batteries (remote sensor)

Keep this manual handy as you use your new product.

It contains practical step-by-step instructions, as well as

technical specifications and warnings you should know.

PRODUCT OVERVIEW

FRONT VIEW

Wireless Thermometer &

Alarm Clock

Model: RAR601

USER MANUAL

1. Outdoor Temperature Area : Readings, sensor

battery and reception status

2. Indoor Temperature Area : Readings and main

unit battery status.

3. Clock / Alarm Area : Time, day of week, month,

date, alarm

4.

: Press to increase setting

5.

: Press to decrease setting

6 MODE : Press to change display / settings

7. MEM : Press to view current or max / min

temperature readings

8. ((.)) : Press to view alarm settings, activate alarms to

increase setting, activate Atomic Clock signal reception

BACK VIEW

1. Wall mount

2. Battery compartment

3. °C / °F switch

4. RESET hole

5. Table stand

REMOTE SENSOR

1. LED Status indicator 1. Wall mount hole

2. Battery compartment

3. Battery compartment

cover

GETTING STARTED

BATTERIES

Batteries are supplied with this product: 2 x UM-4 (AAA) 1.5V

alkaline batteries for the main unit, and 2 x UM-3 (AA) 1.5V

alkaline batteries for the remote sensor.

Insert batteries before first use, matching the polarity as

shown in the battery compartment. For best results, install

batteries in the remote sensor before the main unit. Press

RESET after each battery change.

Do not use rechargeable batteries.

shows when batteries are low.

UNIT

LOCATION

Main Indoor Temperature Area

Remote Outdoor Temperature Area.

CHANGE SETTINGS

1. Press and hold MODE for 2 seconds to enter setting

mode.

2. Press

UP or DOWN to change settings.

3. Press

MODE to confirm.

TABLE STAND OR WALL MOUNT

Insert the stand on the back of the product, or mount it on

a wall with a nail.

REMOTE SENSOR

This product is shipped with a Sensor that collects

temperature readings. Only one sensor can be used with

this product.

SETUP SENSOR

1. Open the remote sensor battery compartment with a

small Phillips screwdriver.

2. Insert the batteries, matching the polarity as shown in

the battery compartment.

3. Place the sensor near the main unit. Press RESET on the

main unit to initiate signal sending between the sensor

and the main unit. The reception icon on the main unit

will blink for approximately 3 minutes while it is searching

for the sensor. (Refer to the Sensor Data Transmission

section for more information.)

4. Close the remote sensor battery compartment.

5. Secure the sensor in the desired location using the wall

mount or table stand.

For best results:

• Insert the batteries before you mount the sensor.

• Place the sensor out of direct sunlight and

moisture.

• Do not place the sensor more than 98 feet (30 meters)

from the main (indoor) unit.

• Position the sensor so that it faces the main (indoor)

unit, minimizing obstructions such as doors, walls,

and furniture.

• Place the sensor in a location with a clear view to the

sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during cold

winter months as below-freezing temperatures may

affect battery performance and signal transmission.

You may need to experiment with various locations to get

the best results.

DATA TRANSMISSION

Data is sent from the sensor(s) every 78 seconds. The

reception icon shown in the Outdoor Temperature Area

shows the status.

ICON DESCRIPTION

Main unit is searching for sensor.

Sensor signal is steady.

— shows The sensor cannot be found. Search

for the sensor or check

SEARCH FOR SENSOR

To search for the sensor, press and hold UP and DOWN

for 2 seconds.

If the sensor is still not found, check the batteries,

obstructions, and remote unit location.

Signals from household devices such as doorbells,

electronic garage doors, and home security systems may

cause temporary reception failure. This is normal and does

not affect general product performance. The reception will

resume once the interference ends.

CLOCK

This product has two displays: Clock with day of week in

English, Spanish, French, Italian, or German, and Calendar

display with date and month.

SET CLOCK

1. Press and hold MODE for 2 seconds. The Clock Area

will blink.

2. Select the hour format (12 or 24 hour), hour, minute,

year, month, day, and language. Press UP or

DOWN to

change the setting. Press MODE to confirm.

The language options are (D) German, (E) English,

(F) French, (I) Italian, and (S) Spanish.

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock and Calendar

display.

ALARM

This product is equipped with a 2-minute crescendo alarm.

VIEW ALARM SETTINGS

Press ((.)). The Alarm Time and On/Off status will show in

the Clock Area.

SET ALARM

1. Press ((.)) to switch to Alarm display.

2. Press and hold ((.)) again for 2 seconds. The Alarm

settings will blink.

3. Select the hour and minute. Press UP or DOWN to

change settings. Press ((.)) to confirm.

ACTIVATE ALARM

Press ((.)) to activate or deactivate the Alarm. shows in

the Alarm Area when the Alarm is activated.

TEMPERATURE

This product can display current, maximum, and minimum

temperature readings collected by the main unit (indoor) and

remote sensor (outdoor).

Outdoor temperature data is collected by the remote sensor

and displayed every 78 seconds.

SELECT TEMPERATURE UNIT

Press the °C / °F button to switch between temperature units.

The button is located in the battery compartment.

MINIMUM / MAXIMUM RECORDS

Press MEM to toggle between current, maximum (MAX) and

minimum (MIN) records.

To clear the records, press and hold

MEM for 2 seconds.

A beep will sound to confirm that the memory has been

cleared.

RESET SYSTEM

The RESET button is located in the battery compartments for

the main unit. Press

RESET when you change the batteries

and whenever performance is not behaving as expected

(for example, unable to establish radio frequency link with

remote sensor).

When you press

RESET, all settings will return to

default value, and you will lose all stored information.

SAFETY AND CARE

Clean the product with a slightly damp cloth and alcohol- free

mild detergent. Avoid dropping the product or placing it in a

high-traffic location.

WARNINGS

This product is designed to give you years of service if

handled properly. Observe the following guidelines:

• Never immerse the product in water. This can cause

electrical shock and damage the product.

• Do not subject the main unit to extreme force, shock,

or fluctuations in temperature or humidity.

• Do not tamper with the internal components.

• Do not mix new and old batteries or batteries of

different types.

• Do not use rechargeable batteries with this

product.

• Remove the batteries if storing this product for a long

period of time.

• Do not scratch the LCD display.

Do not make any changes or modifications to this product.

Unauthorized changes may void your right to use the product.

The technical specification of this product and contents of

this user guide are subject to change without notice. Images

not drawn to scale.

NOTE

NOTE

NOTE

NOTE

NOTE

TROUBLESHOOTING

Check here before contacting our customer service

department.

PROBLEM SYMPTOM REMEDY

Calendar

Strange date /

month

Change language

Temp

Shows “LLL” or

“HHH”

Temperature is out-

of-range

R e m o t e

Sensor

Cannot locate

remote sensor

Check batteries

Check location

Data does not

m a t c h m a i n

unit

Initiate a manual

sensor search

SPECIFICATIONS

MAIN UNIT DIMENSIONS

L x W x H 4.06 x 1.89 x 2.96 inches

(103 x 48 x 75 mm)

Weight 1.62 ounces (46 grams)

with battery

REMOTE SENSOR DIMENSIONS

L x W x H 3.8 x 2.0 x 2.4 inches

(96 x 50 x 62 mm)

Weight 1.62 ounces (46 grams)

without battery

TEMPERATURE

Unit °C or °F

Indoor Range 23 °F to 122 °F(-5 °C to 50 °C)

Outdoor Range -4 °F to 140 °F (-20 °C to 60 °C)

Resolution 0.1 °C (0.2° F)

Memory Min / Max

REMOTE SENSOR

RF frequency 433 MHz

Range 98 feet (30 meters)

with no obstructions

Transmission every 78 seconds

CLOCK

Clock display HH:MM

Hour format 12hr AM/PM or 24hr

Calendar DD/MM; weekday in 5

languages (D, E, F, I, S)

Alarm 2-minute crescendo

POWER

Main unit batteries 2 x UM-4 (AAA) 1.5V alkaline

Sensor batteries 2 x UM-3 (AA) 1.5V alkaline

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more

about Oregon Scientific products such as digital cameras;

MP3 players; children’s electronic learning products and

games; projection clocks; health and fitness gear; weather

stations; and digital and conference phones. The website

also includes contact information for our Customer Care

department in case you need to reach us, as well as frequently

asked questions and customer downloads.

We hope you will find all the information you need on our

website, however if you’re in the US and would like to

contact the Oregon Scientific Customer Care department

directly, please visit:

www2.oregonscientific.com/service/support

OR

Call 1-800-853-8883.

For international inquiries, please visit:

www2.oregonscientific.com/about/international

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

WARNING Changes or modifications not expressly approved

by the party responsible for compliance could void the user’s

authority to operate the equipment.

NOTE This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician

for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for

support or sales. Please call our customer service number

(listed on our website at www.oregonscientific.com), or on the

warranty card for this product) for all inquiries instead.

We

Name: Oregon Scientific, Inc.

Address: 19861 SW 95th Ave., Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: RAR601

Product Name: Remote Sensor

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1,41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: 1) This device may

not cause harmful interference. 2) This device must accept

any interference received, including interference that may

cause undesired operation.

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this Wireless

Thermometer & Alarm Clock (Model: RAR601) is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

A copy of the signed and dated Declaration of Conformity

is available on request via our Oregon Scientific Customer

Service.

COUNTRIES RTTE APPROVAL COMPLIED

All EU countries, Switzerland CH

and Norway

N

EN

1

1

2

3

RAR601_M_E-F_R2.indd 1 2006.6.17 1:17:43 PM

P/N: 086L003348-054 REV1

1/2

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Oregon RAR601 Wekker. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Oregon. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Oregon RAR601 Wekker in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Oregon Wekkers
Meer handleidingen voor Wekkers

Beoordeling

Gerelateerde producten

Handleiding

Oregon RA313P Wekker

Handleiding

Oregon RM382P Wekker

Handleiding

Oregon CIR600 Wekker

Handleiding

Oregon PSS03 Wekker

Handleiding

Oregon AS688NE Wekker

Handleiding

Oregon TA200 Wekker

Handleiding

Oregon AS316NE Wekker

Handleiding

Oregon PSS01 Wekker

Gerelateerde categorieën