Handleiding Ozito PXCLMK-1318 Grasmaaier

Handleiding

DESCRIPTION OF SYMBOLS

Read instruction manual

Nm

Newton Meters

Always keep the lawnmower on the ground when mowing.

Tilting or lifting the lawnmower may cause stones to be thrown out.

Beware of servering toes or hands. Do not put hands or feet near

a rotating blade.

Do not mow in the rain or leave the lawnmower outdoors while raining.

Keep bystanders away. Do not mow whilst people especially children

or pets are in the mowing area.

Blade continues to rotate after the machine is switched off. Wait until all

machine components have completely stopped before touching them.

Pull out Safety Key before

carry out any repair work

Regulator compliance mark

TROUBLESHOOTING

Removing and Fitting the Blade

Cleaning, Maintenance and Storage

1. To remove the blade screw, hold the blade rmly and

with a 13mm socket loosen the blade screw by turning

it anti-clockwise.

NOTE: A piece of timber will assist in holding the blade

while removing or tightening the blade bolt.

2. Remove the blade screw, washer and blade.

3. To t the blade, place the blade over the centre hole aligning the lugs.

4. Then retighten the fastening screw with the universal wrench. The tightening torque should be

approx. 25 Nm.

TIMBER

• Keep all nuts, bolts and screws tight to be sure the lawn mower is in a safe working condition.

• Check the catcher frequently for wear or deterioration.

• Replace worn or damaged parts for safety.

• Only use the replacement blade and blade bolt specied for this product.

• Be careful during adjustments of the lawn mower to prevent entrapment of the ngers between

moving blade and xed parts of the machine.

• When not in use, the mower should be stored in a dry, frost-free location, out of reach of

children. If the housing of the mower requires cleaning, do not use solvents but a moist soft

cloth and brush only.

• Frequently check the wheel threads are rm and tight.

Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the

lawn mower by an unauthorised person or by mishandling of the lawn mower. This tool is designed

for DIY use - use in commercial or industrial environments will void the warranty.

WARNING! ALWAYS ENSURE THE LAWN MOWER

BLADE HAS COMPLETELY STOPPED, REMOVE

SAFETY KEY, BATTERY AND GRASS CATCHER PRIOR

TO ANY MAINTENANCE.

CAUTION! ALWAYS USE GLOVES WHEN HANDLING

THE BLADE. SHARP EDGES COULD CAUSE INJURY.

Problem Cause Remedy

Mower is not

starting

Possible clogging Check underneath the mower and clear out

as necessary

Battery is low in charge Charge battery

Battery not inserted

properly

Insert battery pack correctly

Grass too long Raise the cutting height to reduce starting

load

Safety key not inserted

correctly

Fit correctly

Mower is

hard to push

Height of cut too low Raise cutting height

Cutting blade blunt Replace blade

Possible clogging Check underneath the mower and clear out

as necessary

Grass too long Raise the cutting height and walk slower

Grass too dense Raise the cutting height and walk slower and

cut more frequently

Wet grass Wait until the grass dries before mowing

Motor stops

while cutting

Height of cut too low Raise the cutting height

Battery has no power Charge battery

Mower is

not catching

grass properly

Height of cut too low Raise the cutting height

Wet grass Wait until the grass dries before mowing

Mower

vibrating

Bent or damaged blade Replace blade

Replace the metal blade after 50 hours mowing or 2 years whichever

is sooner. If the blade is cracked or damaged replace it with a new

one.

MAINTENANCE

Only replace the blade with a genuine Ozito replacement blade, as this will ensure top performance

and safety under all conditions.

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household

waste but in an environmentally friendly way. Please recycle where facilities exist.

Check with your local council authority for recycling advice.

Recycling packaging reduces the need for landll and raw materials. Reuse of

recycled material decreases pollution in the environment. Please recycle packaging

where facilities exist. Check with your local council authority for recycling advice.

Battery protection system

The tool is equipped with the battery protection system, which helps to ensure a long

service life.

The output power automatically cuts off during operation when the tool and/or battery

are placed under the following situations:

• When the tool is overloaded:

If this occurs, release the start/stop lever safety key and batteries and remove

causes of overload, then reinsert the safety key and batteries, then press and hold

the lock-off button and pull the start stop lever again to restart.

• When the remaining battery capacity becomes low:

Recharge the battery pack.

Note: The indicated capacity may be lower than the actual level during use or

immediately after using the tool.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Ozito PXCLMK-1318 Grasmaaier. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Ozito. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Ozito PXCLMK-1318 Grasmaaier in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Ozito Grasmaaiers
Meer handleidingen voor Grasmaaiers

Veelgestelde vragen over Ozito PXCLMK-1318 Grasmaaier

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Ozito PXCGTLMC-318 Grasmaaier

Handleiding

Ozito PXBSDMK-4182 Grasmaaier

Handleiding

Ozito PXCLMK-218 Grasmaaier

Handleiding

Ozito PXCLMK-218E Grasmaaier

Handleiding

Ozito ELM-1030 Grasmaaier

Handleiding

Ozito ELM-1536 Grasmaaier

Handleiding

Ozito PXCLMK-1418 Grasmaaier

Handleiding

Ozito PXLMTK-4182 Grasmaaier

Gerelateerde categorieën