Handleiding Pelican 9490 Lamp

Handleiding

Light Operation

Prior to light operation, locate the required fuse.

With a slot screwdriver, screw the fuse into the fuse receptacle on the side of the power pack (A).

1. Press power button on keypad once to switch on. The default setting is the preset* high mode

(as indicated by the three symbols at the top of the screen). (B)

Your remaining run time is displayed in the center of the screen and your battery level at the bottom of the screen.

2. Press the bottom left button on the keypad to change between high, medium and low power. Your remaining run time varies between these settings.

3. Press the up or down buttons on the keypad at any time to enter the Intelligent Control (IC) mode. The IC mode allows you to select any run time up to 24hrs. In this mode, your

power level is displayed at the top of the screen instead of the preset ‘sun’ symbols. You can go back to preset mode at any time by pressing the bottom left button on the keypad.

4. Press the power button on the keypad to switch off.

The 9490 IC features three preset modes which provide recommended lux levels over a certain distance. Please see table below:

*

Setting Lux @ 1m Lux @ 2m Lux @ 3m

3 Suns 4,000 1,260 620

2 Suns 2,180 700 340

1 Sun 670 210 100

The 9490 features the ability to be used while charging. When the charger is connected to AC power and the product is switched on, the 9490 will automatically

select a light level to allow continuous operation. - automatic mode. (In this mode, the battery level will remain constant. The light will be at a 50% level.

In AC mode the display will show the battery level and power level but the time display will be replaced by --:-- and the hourglass icon will be extinguished.

Manual adjustment of the brightness will still be possible. If the brightness is increased, then automatic mode will be exited, a new runtime will be computed

based upon the new operating conditions. The battery level and the display will revert to the normal IC mode, (or preset mode if the bottom left button has been used).

If the brightness is decreased, the unit will remain in continuous mode (and the battery will charge up slowly).

If the charger is removed, the unit will return to normal operation and the run-time display will show the remaining time for the selected setting.

Bluetooth Operation

The 9490 is equipped with Bluetooth capability and you are able to operate it via the

Pelican RALS (Remote Area Lighting Systems) app.

To download the RALS app, visit the app store and search for Pelican RALS

Once installed the app icon should appear on your screen. Please note that this app requires iOS 7.0 or later.

It is compatible with iPhone, iPad and iPod touch only.

The Bluetooth is active by default while the battery is connected to the 9490. Once you open the app your 9490 should appear

under the ‘Found’ heading as per the following example: (C) 9490 000001 (the last six digits are your unique serial number).

By selecting this serial number the app should connect to the 9490 RALS and the serial number should now appear under the

‘Connected’ heading in the app screen and the Bluetooth logo on the 9490 screen should turn from white to blue. (D)

You can connect to multiple 9480/9490 units but only operate one at a time.

Once connected, the default setting is always off. To switch on you can either press the ‘on/off’ toggle on the app screen

or slide the intensity slider towards the right until you reach your desired light intensity. The app works in conjunction

with the keypad screen on your 9490; as you adjust the slider on the app screen, the remaining

run time adjusts on the keypad screen.

The app will remain connected until you either close the app or go out of range*, at which point the Bluetooth logo on the

9490 keypad screen will turn from blue to white. You can override the app control by operating the 9490 keypad if desired.

The Bluetooth can be manually deactivated on the 9490 if required. To deactivate it, switch the 9490 on, then press and hold the bottom left button on the keypad until the

Bluetooth logo in the bottom left of the screen disappears. It can be reactivated again by pressing and holding the same button again until the logo reappears.

*Range varies depending upon the environment in which the unit is being used.

Flash Mode

1 Press and hold the power button for 3 seconds until flashing begins, then select the required power level.

2. To switch flashing mode off, press the power button again.

Power Pack

The 9490 power pack is removable. This allows for continuous use of the product by replacing it with

another fully charged power pack when required.

To remove the power pack simply release the clips and lift via the handle. (E, F)

Power Pack Level

The power pack is equipped with a power level monitor which remains permanently illuminated to tell the user

how much power the battery contains. The level monitor will glow brightly when the product is switched on and dim when not in use.

While the product is switched on, the number of segments illuminated in the level monitor will gradually reduce over time. The product will switch off soon after a single red

flashing segment is displayed. Once the product has switched itself off, the single red segment in the level monitor will continue to flash, indicating that a recharge is required.

Power Pack Charging

The power pack can be charged inside or outside of the main 9490 housing.

1. Remove the dust cap from the charging socket and plug in charger.

2. Connect the charger to the mains AC power supply.

Mast Operation

1. Lift the light and pole to a selected position, then twist the red locking

collar clockwise to lock the pole in place.

2. To extend the mast, release the clamp on each section and raise.

Lock each clamp until you have reached your chosen height.

3. To collapse the mast, reverse the procedure.

Pelican 9490 User Manual

u

A

B

C

D

Battery Safety Information

WARNING: HANDLE AND STORE BATTERIES PROPERLY TO AVOID INJURY OR DAMAGE BATTERIES

CAN BE DANGEROUS!

Most battery issues arise from improper handling of batteries, and particularly from the use of damaged or counterfeit

batteries. Please review the information below to avoid serious injury and/or damage to your property.

Rechargeable Batteries

1. Hazardous location safety approvals for explosive environments are only valid for the Pelican battery pack that is

supplied with the light.

2. For replacement battery packs only use the approved Pelican battery pack for the model of the light that you are

using. The use of other battery packs will invalidate the safety approval.

3. Lights should only be charged in a non-hazardous location.

4. Lights should only be charged using the Pelican charger base that is supplied with the light.

5. Lights should be charged and operated between the temperatures shown: Charge Temperature: -20°C to 50°C

(-4°F to 122°F)

Operating Temperature: -20°C to 50°C (-4°F to 122°F)

6. Do not charge with alkaline batteries installed in the light. Attempting this can cause internal gas or heat generation

resulting in venting, explosion or possibly fire.

7. Deep discharge of the rechargeable battery may cause batteries to vent potentially dangerous gasses and

electrolytes.

Always dispose of all batteries properly at an approved battery recycling center.

REMOTE AREA LIGHTING SYSTEMS PELICAN 1 YEAR LIMITED

WARRANTY FOR RALS PRODUCTS

Pelican Products, Inc. (“Pelican”) warrants to the original purchaser its Remote Area Lighting Systems (RALS) and all other

products manufactured by the Advanced Area Lighting Group (AALG) against defects in materials and workmanship under

normal use, service, and maintenance for a period of twelve months from the date of purchase. This warranty applies only to the

original purchaser and is not transferable.

TO THE EXTENT PERMITTED BY LAW: (A) THIS WARRANTY IS IN LIEU OF ALL WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE; AND (B) ALL OTHER IMPLIED WARRANTIES AND ANY LIABILITY NOT BASED UPON

CONTRACT ARE HEREBY DISCLAIMED AND EXCLUDED.

TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL PELICAN BE LIABLE FOR ANY INDIRECT, PUNITIVE,

INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES, REGARDLESS OF WHETHER A CLAIM FOR

SUCH DAMAGES IS BASED ON WARRANTY, CONTRACT, NEGLIGENCE OR OTHERWISE. To the extent permitted by law,

in no event shall Pelican’s liability to the purchaser for damages hereunder exceed the purchase price of the product in respect of

which damages are claimed.

With valid dated proof of purchase, Pelican will either repair or replace ay defective part, at our sole option. TO THE EXTENT

PERMITTED BY LAW, THE REMEDIES HEREBY PROVIDED SHALL BE THE SOLE AND EXCLUSIVE REMEDIES OF

THE ORIGINAL PURCHASER. Any repaired or replacement part or unit is covered only for the unexpired portion of the warranty

on the original product purchased.

To make a warranty claim, the purchaser must contact Pelican Products, Inc. at 23215 Early Avenue, Torrance, CA 90505 or

[email protected], or by calling 1-800-473-5422, extension 5. Any warranty claims shall be made by the purchaser as

soon as practicable and in no event more than twelve months from the date of purchase. The purchaser must provide valid dated

proof of purchase and obtain a return authorization number from Pelican Customer Service prior to returning any product, and

is responsible for paying for all warranty freight costs. If Pelican determines that any returned product is not defective, within the

terms of this warranty, the purchaser shall pay Pelican all costs of handling, return freight and repairs at Pelican’s prevailing rates.

All warranty claims of any nature are barred if the product has been altered or in any way physically changed, or subjected to

abuse, misuse, negligence or accident.

Some states and countries do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental

or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights,

and you may have other rights which vary from state to state and country to country.

In Australia: The benefits provided to you under this warranty are in addition to your rights and remedies as a consumer under

the Competition and Consumer Act 2010 (Cth). Nothing in this warranty limits the rights or obligations of a party under provisions

of the Competition and Consumer Act 2010 (Cth) in relation to the supply to consumers of goods which cannot be limited, modi-

fied or excluded. If applicable, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You

are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not

amount to a major failure. If you are not a consumer under the Competition and Consumer Act 2010 (Cth), then your rights may

be limited. To make a warranty claim, the purchaser must contact Pelican Products Australia, Suite 2.33, West Wing, Platinum

Bldg., Erina NSW 2250, Tel: +612 4367 7022. Any warranty claims shall be made by the purchaser as soon as practicable.

The purchaser must obtain a return authorization number from Pelican Customer Service prior to returning any product, and is

responsible for paying for all warranty freight costs. If Pelican determines that any returned product is not defective, within the

terms of this warranty, the purchaser shall pay Pelican all costs of handling, return freight and repairs at Pelican’s prevailing rates.

In the event that Pelican determines that any returned product is defective, within the terms of this warranty, Pelican shall pay the

purchaser all reasonable costs of the purchaser in making claim under this warranty.

Información sobre seguridad de las baterías

ADVERTENCIA: MANIPULAR Y GUARDAR LAS BATERÍAS CON PRECAUCIÓN PARA EVITAR DAÑOS. LAS

BATERÍAS PUEDEN RESULTAR PELIGROSAS.

La mayoría de los problemas relacionados con las baterías surgen al utilizarlas incorrectamente y, sobre todo, al

emplear baterías falsas o en mal estado. Consulta la información siguiente para evitar daños personales o en el

producto.

Baterías recargables

1. Los certificados de seguridad en zonas peligrosas para entornos explosivos solo se aplican a la batería Pelican

que se suministra con la linterna.

2. Para cambiar la batería utilice únicamente una batería Pelican homologada para el modelo de linterna correspon-

diente. El uso de otras baterías anulará el certificado de seguridad.

3. No cargar la linterna en zonas peligrosas.

4. Cargar la linterna únicamente en la base de cargador Pelican que se suministra con la linterna.

5. Las linternas deben cargarse y utilizarse respetando el rango de temperaturas que aparece a continuación:

Temperatura de carga: de -20 °C a 50 °C

Temperatura de funcionamiento: de -20 °C a 50 °C

6. No cargar con pilas alcalinas dentro de la linterna, ya que podría generarse gas o calor en el interior que podría

emanar y provocar una explosión o un incendio.

7. Si las pilas recargables se descargan demasiado rápido pueden originarse fugas de gases peligrosos y

electrolitos.

Desecha las baterías en un centro de reciclado homologado.

Informations relatives à la sécurité de la batterie

AVERTISSEMENT : MANIPULER ET RANGER CORRECTEMENT LES BATTERIES AFIN

D’ÉVITER TOUT RISQUE DE LÉSION CORPORELLE OU DE DOMMAGE MATÉRIEL. LES BAT-

TERIES PEUVENT ÊTRE DANGEREUSES !

La plupart des problèmes liés aux batteries sont dus à une manipulation impropre de ces dernières,

notamment à l’utilisation de batteries endommagées ou contrefaites. Lire attentivement les informa-

tions ci-dessous, afin d’éviter tout risque de lésion corporelle et/ou de dommage matériel grave de vos

produits.

Batteries rechargeables

1. Les agréments de sécurité de site dangereux pour les environnements explosifs sont valables uniquement pour le

bloc-pile Pelican fourni avec le système d’éclairage.

2. Pour remplacer le bloc-pile, utiliser uniquement un bloc-batterie Pelican homologué pour le modèle du système

d’éclairage utilisé. L’utilisation d’autres blocs-piles annulera l’agrément de sécurité.

3. Le système d’éclairage doit être rechargé uniquement dans un site non dangereux.

4. Le système d’éclairage doit être rechargé uniquement à l’aide de la base-chargeur Pelican fournie avec le

système d’éclairage.

5. Le système d’éclairage doit être rechargé et ne doit fonctionner que dans les plages de température indiquées

ci-dessous : Température de charge : -20 °C à 50 °C (-4 °F à 122 °F)

Température de fonctionnement : -20 °C à 50 °C (-4 °F à 122 °F)

6. Ne pas recharger lorsque des piles alcalines sont installées dans le système d’éclairage. Dans le cas contraire,

cela pourrait entraîner une production interne de gaz ou de chaleur, provoquant un dégazage, une explosion ou

éventuellement un incendie.

7. Un déchargement important des piles rechargeables peut provoquer un dégazage potentiellement dangereux et

une fuite de l’électrolyte.

Toujours mettre au rebut toutes les piles correctement dans un centre de recyclage des piles agréé.

CON LA GARANTÍA LIMITADA DE EXCELENCIA DE POR VIDA DE PELICAN

Pelican Products, Inc., ofrece una garantía de por vida en sus linternas contra roturas o defectos de

fabricación. Esta garantía no cubre la lámpara ni las pilas. Las reclamaciones de garantía de

cualquier clase se considerarán nulas en caso de que el producto haya sufrido alteraciones, daños

o modificaciones físicas de cualquier tipo, se haya hecho un uso incorrecto, abusivo o negligente

o haya sufrido accidentes.

La garantía de por vida no cubre las maletas rotomoldeadas, los productos del AALG ni la parte de

tejido de las mochilas.

GARANTIE D’EXCELLENCE À VIE LIMITÉE DE PELICAN

Pelican Products, Inc. garantit à vie ses torches contre la casse et les défauts de fabrication. Cette

garantie ne couvre pas l’ampoule ou les piles. Toute demande de prise en charge sous garantie, de

quelque nature que ce soit, sera refusée si le produit a été transformé, endommagé ou physiquement

modifié d’une façon ou d’une autre, ou encore sujet à un traitement abusif, une mauvaise utilisation,

une négligence ou un accident. Pour une version complète et détaillée de la garantie, voir

http://www.pelican.com/warranty.

La garantie à vie ne couvre pas les valises rotomoulées, les produits AALG et la partie en tissu des

sacs à dos.

© PELICAN PRODUCTS 2014 009493-3110-000 5-12448 REV A DE/14

All trademarks and logos displayed herein are registered and unregistered trademarks of Pelican Products, Inc. and others.

Mode clignotement

1. Presser et maintenir le bouton d’alimentation

enfoncé pendant 3 secondes jusqu’à ce que la lampe

commence à clignoter, puis sélectionner le niveau

d’alimentation requis.

2. Pour arrêter le mode clignotement, presser à nouveau

le bouton d’alimentation.

Bloc d’alimentation

Le bloc d’alimentation 9490 est déposable. Cela permet,

si nécessaire, de continuer à utiliser le produit en

remplaçant le bloc d’alimentation par un autre

entièrement chargé. Pour déposer le bloc d’alimentation,

relâcher simplement les attaches et soulever par la poignée.

Niveau du bloc d’alimentation

Chaque bloc d’alimentation est équipée d’un moniteur de

niveau d’alimentation qui reste allumé en permanence pour

indiquer à l’utilisateur l’autonomie de batterie restante. Le moniteur de

niveau brille fortement à l’allumage du produit et puis s’atténue lorsque le produit n’est pas utilisé.

Lorsque le produit est allumé, le nombre de segments allumés sur le moniteur de niveau

baisse progressivement au fil du temps. Le produit s’éteint rapidement après avoir

affiché d’un seul segment rouge clignotant. Une fois que le produit s’est éteint tout seul,

le segment rouge unique du moniteur de niveau continue de clignoter, pour indiquer

que la batterie doit être rechargée.

Chargement du bloc d’alimentation

Le bloc d’alimentation peut être chargé à l’intérieur ou à l’extérieur du logement principal du 9490.

1. Retirer le cache anti-poussière de la prise de chargement et brancher le chargeur.

2. Brancher le chargeur à l’alimentation électrique CA réseau.

Indication du cycle de chargement :

Pendant le chargement, l’écran du moniteur de niveau s’éclaire davantage et continue en cycle

jusqu’à affichage de tous les segments. Quand le cycle de l’affichage est terminé et tous les seg-

ments sont affichés, la batterie est entièrement chargée.

Remarque : Le bloc d’alimentation peut rester fixé au chargeur pendant la maintenance sans que

cela n’endommage la batterie.

AVERTISSEMENT : UTILISER UNIQUEMENT UNE ALIMENTATION ÉLECTRIQUE

APPROUVÉE ET S’ASSURER QUE LE CHARGEMENT EST EFFECTUÉ DANS UNE PIÈCE

BIEN AÉRÉE. NE PAS RANGER UN BLOC-PILE S’IL EST DÉCHARGÉ.

SI UN BLOC-PILE N’EST PAS UTILISÉ PENDANT UNE PÉRIODE PROLONGÉE,

LE RECHARGER TOUS LES 3 MOIS. UNE FOIS LA CHARGE TERMINÉE, TOUJOURS DÉ-

BRANCHER L’ALIMENTATION ÉLECTRIQUE.

Remplacement de la batterie / du fusible

Contactez votre distributeur pour toute batterie ou fusible de rechange.

Environnement

Au terme de sa durée de vie technique, la batterie au plomb scellée doit être envoyée

à un centre de recyclage approprié ou retournée au point d’achat.

RoHS

compliant

PELICAN PRODUCTS

23215 Early Ave. • Torrance, CA 90505 USA • Tel (310) 326-4700 • FAX (310) 326-3311 • www.pelican.com

PELICAN PRODUCTS ULC

10221-184th Street • Edmonton, Alberta T5S 2J4 Canada • Tel (780) 481-6076 • FAX (780) 481-9586 • www.pelican.ca

E F

E

F

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Pelican 9490 Lamp. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Pelican. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Pelican 9490 Lamp in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Pelican Lampen
Meer handleidingen voor Lampen

Veelgestelde vragen over Pelican 9490 Lamp

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.