Handleiding Poulan PL914 Kettingzaag

Handleiding

OPERATION

BEFORE STARTING

• Make sure you have the proper personal protective

equipment.

• Inspect the cleanliness of the power tool. Make sure the

handles are dry, clean, and free of oil and grease.

• Inspect for correct alignment of moving parts.

• Inspect for broken or damaged parts. Do not use the

power tool if any damage affects safety or operation.

Have damage repaired by an authorized service center.

• Inspect the chain. Keep the chain sharp, clean,

lubricated and properly tensioned for better and safer

performance.

• Inspect all screws and nuts. Tighten if necessary.

• Inspect the power cord. If it is damaged, have it repaired

by an authorized service center.

• Inspect the extension cord. Replace it if it is damaged.

• Check the oil level gauge prior to starting and regularly

GXULQJRSHUDWLRQ5H¿OOWKHRLOZKHQWKHRLOOHYHOLVORZ

• Connect the power cord to the extension cord.

• Connect the extension cord to the power supply.

To reduce the risk of disconnection of power cord from

the extension cord during operating, make a knot as

illustrated, then connect the extension cord plug to the

outlet.

A cable hook (12) is attached to the handle to reduce

strain on the extension cord. To use the cable hook, insert

the extension cord into the hole at the rear of the chain

saw. Place the loop formed over the cable hook. Gently

tug on the extension cord to ensure that it is tightened

around the cable hook.

Keep the extension cord clear of the work area. Position

the cord so that it will not get caught on bushes, hedges,

tree trunks, or other obstructions while you are working.

a WARNING: Check the extension cord before each

XVHDQGIUHTXHQWO\ZKLOHZRUNLQJ,IGDPDJHG

replace immediately. Never use the tool with a

damaged cord since touching the damaged area

could cause electrical shock, resulting in serious

injury.

PERSONAL PROTECTIVE EQUIPMENT

A

B

C

D

E

F

G

A. Use eye protection such as non-fogging, vented

goggles or a face screen.

% 8VHVRXQGEDUULHUVVXFKDVHDUSOXJVRUPXIÀHUVWR

protect your hearing.

C. Use an approved safety hard hat.

' :HDUVQXJ¿WWLQJFORWKLQJ

E. Use heavy-duty, non-slip gloves.

F. Use safety chaps.

G. Use steel-toed safety footwear with non-slip soles.

STARTING AND STOPPING THE CHAINSAW

To start the chain saw:

Press and hold the trigger lock (11). This makes the trigger

operational.

Squeeze and hold the trigger (13), release the trigger

lock, and continue to squeeze the trigger for continued

operation.

After starting the chain saw, it will run immediately at high

speed.

To stop the chain saw:

Release the trigger.

Releasing the trigger stops the chain saw within 1 second.

Heavy sparking is normal. If releasing the trigger does

not stop chain saw within 1 second, have the machine

serviced by an authorized service center.

23(5$7,1*7+(&+$,1%5$.(LIHTXLSSHG

In the event of kick-back, the chain brake (3) will be

actuated via the front hand guard. The front hand guard is

pushed forwards by the back of the hand and this causes

the chain brake to stop the motor within 0.15 seconds.

To be able to use the chain saw again, you must release

the chain brake. Switch off the chain saw, then push the

front hand guard back into the vertical position until it locks

in place. The chain brake is now fully functional again.

Check the operating condition of the chain brake prior to

each use.

Engage the chain brake by rotating your left hand around

the front handle, allowing the back of your hand to push

the front hand guard toward the bar while the chain is

rotating rapidly. Be sure to maintain both hands on the

saw handles at all times.

Release the chain brake by grasping the top of the front

hand guard and pulling toward the front handle.

10

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Poulan PL914 Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Poulan. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Poulan PL914 Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Poulan Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Poulan PL914 Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Poulan P4018AV BH Kettingzaag

Handleiding

Poulan PL1416 Kettingzaag

Handleiding

Poulan P3314WSA Kettingzaag

Handleiding

Poulan P3416 Kettingzaag

Handleiding

Poulan P3314WS Kettingzaag

Handleiding

Poulan P4018WM Kettingzaag

Handleiding

Poulan PRCS16i Kettingzaag

Handleiding

Poulan PL3816 Kettingzaag

Gerelateerde categorieën