Handleiding Ryobi RPT400 Heggenschaar

Handleiding

2

ENGLISH (Original Instructions)

tools are dangerous in the hands of untrained users.

n Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

n Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

GENERAL SAFETY RULES

n Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking

into account the working conditions and the work to be

performed. Use of the power tool for operations different

from intended could result in a hazardous situation.

SERVICE

n Have your power tool serviced by a qualied repair

person using only genuine replacement parts.

This will ensure that the safety of the power tool is

maintained.

ADDITIONAL SAFETY INSTRUCTION

n THIS MACHINE CAN CAUSE SERIOUS INJURIES.

Read the instructions carefully for the correct handing,

preparation, maintenance, starting and stopping of the

machine. Be familiar with all controls and the proper

use of the machine;

n Never allow children to use the machine;

n Beware of overhead power lines;

n Avoid operating while people, especially children are

nearby;

n Dress properly! Do not wear loose clothing or jewellery

which can be caught in moving parts. Use of sturdy

gloves, non-skid footwear, and safety glasses is

recommended;

n Stop the engine or disconnect from mains before:

-Cleaning or when clearing a blockage;

-Checking, maintenance or working on the machine;

-When adjusting the working position of the cutting

device.

n Where the hedge trimmer is provided with adjustments

to the angle of the cutting device and / or the length

of the handle shaft never hold the cutter blades when

making adjustments to the working position of the

cutting device. Always ensure that the cutting device

is correctly located in a designated working position

before starting the engine or plugging the machine in

to the mains;

n While operating the machine be always sure of a safe

and secure operating position especially when using

steps or a ladder;

n Do not attempt to repair the machine unless you are

qualied to do so;

n Do not operate the machine with a damaged or

excessively worn cutting device;

n A warning of noise level and the need for ear protection;

n Always ensure all handles and guards are tted when

using the machine. Never attempt to use an incomplete

machine or one tted with an unauthorised modication;

n Where a hedge trimmer is provided with more than one

handle always use two hands to operate it;

n When transporting or storing the machine always t the

cutting device guard;

n Instructions for correct use and an indication that the

machine should not be used for any other purpose;

n Know how to stop the machine quickly in an emergency;

n Always be aware of your surroundings and stay alert

for possible hazards that you may not hear due to the

noise of the machine.

n Keep all parts of the body away from the cutter

blade. Do not remove cut material or hold material

to be cut when blades are moving. Make sure

the unit is unplugged and the switch is off when

clearing jammed material. A moment of inattention

while operating the hedge trimmer may result in serious

personal injury.

n Carry the hedge trimmer by the handle with the

cutter blade stopped. When transporting or storing

the hedge trimmer always t the cutting device

cover. Proper handling of the hedge trimmer will reduce

possible personal injury from the cutter blades.

n Keep cable away from cutting area. During operation

the cable may be hidden in shrubs and can be

accidentally cut by the blade.

WARNING :

The vibration emission during actual use of

power tool can differ from the declared total

value depending on the ways in which the tool is

used; and of the need to identify safety measures

to protect the operator that are based on an

estimation of exposure in the actual conditions of

use.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Ryobi RPT400 Heggenschaar. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Ryobi. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Ryobi RPT400 Heggenschaar in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Ryobi Heggenscharen
Meer handleidingen voor Heggenscharen

Veelgestelde vragen over Ryobi RPT400 Heggenschaar

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Ryobi RY18HT55A Heggenschaar

Handleiding

Ryobi RHT4245 Heggenschaar

Handleiding

Ryobi CHT1850P Heggenschaar

Handleiding

Ryobi OHT1855R Heggenschaar

Handleiding

Ryobi RHT1850XLi Heggenschaar

Handleiding

Ryobi OHT1850H Heggenschaar

Handleiding

Ryobi OHT1850X Heggenschaar

Handleiding

Ryobi RHT1850Li Heggenschaar

Gerelateerde categorieën