20
OPERATING THE REMOTE CONTROL /
BLUETOOTH
®
CONNECTIVITY
OPERATING THE REMOTE CONTROL
Power key
Start / Stop
Increase / Decrease speed
Increase / Decrease time
Mode key
Program key
Quick adjustment for speed, level 10 in manual mode
Quick adjustment for speed, level 20 in manual mode
Quick adjustment for speed, level 30 in manual mode
To start the unit, you must rst switch on the main switch and then press the
Power key - the unit is now in standby mode. Now you can start training in
manual mode by pressing Start / Stop or you can select a programme (there
are 3 programmes: P1, P2 and P3) by pressing the P-key.
The default time for a workout is 10 minutes, after which the workout ends
automatically. To switch o the device, press the Power key (after the end of
the training session) and then turn o the main switch.
SPEED
TIME
M
P
10
20
30
Increase / Decrease time: You can preset the workout time in the range from 1 to 10 minutes by pressing the
TIME keys. If you do not set any time, the device will run for 10 minutes.
Increase / Decrease speed: You may set the speed in 30 steps (level 1-30). The speed setting does not work in
programmes (P1/P2/P3) because there it is controlled automatically.
Mode key: The unit has various oscillation modes. In manual mode, you can select the oscillation mode with the
mode key. After the rst start in manual mode, the unit operates in vertical oscillation mode. If you now press the
mode key once, the unit switches to vibration mode. If you press the mode key twice, the unit switches to vertical
AND horizontal oscillation mode. If you press the key three times, the device switches to horizontal oscillation PLUS
vibration mode, and if you press the key four times, the device switches to vertical oscillation PLUS vibration mode.
Pressing ve times activates all movement patterns (vertical plus horizontal oscillation plus vibration). Pressing the
mode key again will switch the unit back to vertical oscillation mode. You can see in the computer display which
modes are currently active.
Start/Stop: If you press this key, the device starts moving after a 3-second countdown. When pressed again, the
unit stops moving.
Power key: If possible, always switch o the appliance with this key after the end of the training session. You can
also switch it o with this key when it is in motion. The unit automatically switches to standby mode without any
training or input. Press the power button to reactivate the computer.
Bluetooth
®
connectivity: While the appliance is switched on, search for „ADVENOR“ with your mobile device
(e.g. smartphone or tablet, Bluetooth
®
should be activated) to initiate pairing. After successful connection, an acou-
stic signal sounds and the Bluetooth
®
symbol appears in the display.
Praat mee over dit product
Laat hier weten wat jij vindt van de Skandika SF-2671 V2500 Trilplaat. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.