Handleiding Sony M-679V Cassetterecorder

Handleiding

Welcome!

Thank you for purchasing the Sony Microcassette-

Corder. Some features are:

•The BATT lamps indicate remaining battery power in

two steps and the i lamp indicates when to replace the

batteries.

•The CUE MARKER (M-729V only) function locates a

specific position of a dictation.

•The FAST PB (fast playback) function enables you to

review the contents approx. 20% faster than normal

playback.

•The VOR (Voice Operated Recording) system starts and

stops recording automatically in response to the sound.

•Edit function—You can start recording directly from the

playback mode by pressing the r button to correct a

previously recorded portion.

•Tape counter

•Automatic shut-off mechanism at the end of the tape (in

the recording/playback mode only)

•Stop-pause-release function—The pause switch is

released automatically when the p6 button is

depressed, so that you don’t miss a recording chance.

Preparing Power Sources

Choose one of the following power sources.

Dry Batteries (see Fig. A-a)

Make sure that nothing is connected to the DC IN 3V

jack.

1 Open the battery compartment lid.

2 Insert two R6 (size AA) batteries with correct polarity

and close the lid.

If the battery compartment lid is accidentally

detached (see Fig. A-b)

Attach it as illustrated.

When to replace the batteries (see Fig. A-c)

Replace the batteries with new ones when the BATT

lamps go off and the i lamp flashes.

The BATT lamps change as illustrated.

Notes

•The unit will play back normally for a while, even after the i

lamp flashes. However, replace the batteries as soon as you can. If

you do not, the playback cannot be made with normal sound, noise

may be recorded and the recorded sound will not be loud enough.

•In the following cases you do not need to replace the batteries:

– if the BATT lamps flash with the playback sound when you turn

up the volume.

– if the i lamp lights momentarily when the tape starts running

or at the end of the tape.

– if the i lamp flashes during FF (CUE) or REW (REVIEW).

•In some cases when the unit is used with rechargeable batteries

(supplied with M-679V only or not supplied), only one BATT lamp

will light even though the batteries have been fully charged.

English

Precautions

On power

•Operate the unit only on 3 V DC.

For AC operation, use the AC power adaptor

recommended for the unit. Do not use any other type.

For battery operation, use two R6 (size AA) batteries.

•The nameplate indicating operating voltage, etc., is

located on the bottom of the unit.

On the unit

•Use only the y(standard microcassettes)

with this unit. Non-standard cassette cannot be used

because the “L” dimension (see Fig. E) is different.

•Do not leave the unit in a location near heat sources, or

in a place subject to direct sunlight, excessive dust or

mechanical shock.

•Should any solid object or liquid fall into the unit,

remove the batteries or disconnect the AC power

adaptor, and have the unit checked by qualified

personnel before operating it any further.

•Keep personal credit cards using magnetic coding or

spring-wound watches etc. away from the unit to

prevent possible damage from the magnet used for the

speaker.

•When you do not use the unit for long, remove the

batteries to avoid damage caused by battery leakage

and subsequent corrosion.

•If the unit has not been used for long, set it in the

playback mode and warm it up for a few minutes

before inserting a tape.

If you have any questions or problems concerning your

unit, please consult your nearest Sony dealer.

Troubleshooting

Should any problem persist after you have made these

checks, consult your nearest Sony dealer.

A cassette cannot be inserted.

n The cassette is being inserted in the wrong way. (The

cassette should be inserted in the lid with the tape side

facing you.)

n 9 has been already pressed.

r cannot be pressed.

n There is no cassette in the cassette compartment.

n The cassette tab has been removed.

r or 9 cannot be pressed.

n The tape has reached the end.

n After the automatic shut-off, C PAUSE is slid in the

direction of the arrow.

The unit does not operate.

n The batteries have been inserted with incorrect polarity

n The batteries are weak. Replace both batteries with new

ones.

nC PAUSE is slid in the direction of the arrow.

n The AC power adaptor or car battery cord is connected to

the unit only and you are going to use the unit on

batteries.

No sound comes from the speaker.

n The earphone is plugged in.

n The volume is turned down completely.

The sound drops out or comes with excessive

noise.

n The volume is turned down completely.

n The batteries are weak. Replace both batteries with new

ones.

n The head is contaminated. See “Maintenance”.

Tape speed is too fast or too slow in the

playback mode.

n Improper setting of the TAPE SPEED switch. Set it to the

same speed as that used for recording.

Tape speed is faster than the normal playback

speed.

n The FAST PB switch is slid in the direction of the arrow.

n The TAPE SPEED switch is set between the 1.2 cm and 2.4

cm positions.

Recording cannot be made.

n Connection is made incorrectly.

n The batteries are weak. Replace both batteries with new

ones.

n The head is contaminated.

n Improper setting of the VOR switch. Set it to H or OFF.

Recording is interrupted.

n The VOR switch is set to H or L. When you do not use

VOR, set it to OFF.

Recording cannot be erased completely.

n The head is contaminated.

Maintenance (see Fig. F)

To clean the tape head and path

Press 9 and wipe the head 1, capstan 2 and the pinch

roller 3 with a cotton swab, moistened with alcohol

every 10 hours of use.

To clean the exterior

Use a soft cloth slightly moistened in water. Do not use

alcohol, benzine or thinner.

Specifications

Tape

y (normal position type)

Recording system

2-track 1-channel monaural

Speaker

Approx. 3.6 cm dia.

Tape speed

2.4 cm/s, 1.2 cm/s

Frequency range

250 – 4,000 Hz

Input

Microphone input jack (minijack/PLUG IN POWER)

sensitivity 0.24 mV for 3 kilohms or lower impedance microphone

Output

Earphone jack (minijack) for 8 – 300 ohms earphone

Power output (at 10% harmonic distortion)

M-629V/679V 160 mW

M-729V 260 mW

Battery life (recording)

See “Preparing Power Sources”.

Power requirements

3 V DC

Two R6 (size AA) batteries

Dimensions (w/h/d)

Approx. 65.1 × 121.4 × 25.2 mm incl. projecting parts and controls

Mass

Approx. 130 g incl. batteries

Supplied accessories

Microcassette tape MC-30 (1) (M-629V/729V European model only)

R6 (size AA) batteries (2) (M-629V/729V European model only)

AC power adaptor (1) (M-679V only)

Charge adaptor (1) (M-679V only)

Rechargeable batteries NC-AA, 1.2 V, 600 mAh, Ni-Cd (2) (M-679V

only)

Design and specifications are subject to change without notice.

Optional accessories

Microcassette MC-60, MC-30

Earphone ME-81, ME-L82

Connecting cord RK-G64HG (miniplug to miniplug with attenuator)

Electret condenser microphone ECM-T110

AC power adaptor AC-E30HG

4 Set VOR to H, L or OFF.

If you set VOR to H or L, the unit automatically starts

recording the sound and pauses when there is no

sound (you can save tapes and batteries).

H : To record at meetings or in a quiet and/or

spacious place.

L : To record for dictation or in a noisy place.

When the sound is not loud enough, set it to OFF, or

the unit may not start recording.

5 Press r.

Recording starts. While the tape runs, the REC lamp

lights and flashes depending on the strength of the

sound.

Recording level is fixed.

Slide CPAUSE in the direction of

the arrow. The REC and BATT lamps

go off.

To Press or slide

p6Stop recording

Start recording during

playback

r during playback (the unit becomes

in the recording mode)

Review the portion just

recorded

Push up 0CUE/)REVIEW

toward )REVIEW during

recording. Release the button at the

point to start playback.

Pause recording

To

Press or slide

Stop playback/stop fast

forward or rewind*

p6

Pause playback Slide CPAUSE in the direction of

the arrow. The BATT lamp goes off.

Fast forward Slide 0CUE/)REVIEW toward

0CUE during stop**

Rewind Slide 0CUE/)REVIEW toward

)REVIEW during stop.**

Search forward during

playback (CUE)

Keep 0CUE/)REVIEW pushed

down during playback and release it

at the point you want.**

Search backward during

playback (REVIEW)

Keep 0CUE/)REVIEW pushed

up during playback and release it at

the point you want.**

* If you leave the unit after the tape has been wound or rewound,

the batteries will be consumed rapidly. Be sure to depress p6.

** The tape moves faster in the rewind/REVIEW mode than in the

fast forward/CUE mode.

To increase the playback speed

Slide the FAST PB switch in the direction of the arrow.

The playback speed will be increased.

To return to the original speed, slide the FAST PB switch

to the original position.

At the end of the tape

In the recording or playback mode, the tape stops at the

end of the tape and the locked buttons will be released

automatically (Automatic shut-off mechanism).

After fast forward or rewind, be sure to set 0CUE/

)REVIEW back to the center.

Recording/Playback with the

Connected Equipment

Dubbing onto another tape recorder

(see Fig. D-a)

Set this unit to the playback mode and another tape

recorder to the recording mode.

Recording from another tape recorder

(see Fig. D-b)

Set this unit to the recording mode and another tape

recorder to the playback mode. In this case set VOR to

OFF.

Recording with an External Microphone

(see Fig. D-c)

Connect a microphone to MIC. When using a plug-in-

power system microphone, the power to the microphone

is supplied from this unit.

Note

When recording with an external microphone, the VOR system may

not work properly because of the difference in sensitivity.

Take out a cassette p6

Note

Select the 2.4 cm tape speed for recording, if you play back the

recorded tape with another unit. Otherwise, the sound quality may

be changed.

Notes on VOR (Voice Operated Recording)

• The VOR system depends on the environmental conditions. If you

cannot get the desired results, set VOR to OFF.

• When you use the system in a noisy place, the unit will stay in the

recording mode. If the sound is too soft, on the contrary, the unit

will not start recording. Set VOR to H (high) or L (low) depending

on the conditions.

To monitor the sound

Connect the earphone (not supplied) to the EAR jack. The

monitor volume cannot be adjusted by VOL.

To prevent a cassette from being accidentally

recorded over (see Fig. B-c)

Break out and remove the cassette tabs. To reuse the

cassette for recording, cover the tab hole with adhesive

tape.

Recording cue markers (M-729V only)

While recording, you can record a special signal on the

tape to mark a specific position.

At the desired position, press CUE MARKER to record a

signal. The REC lamp goes off and a signal will be

recorded on the tape. If you want to record a signal

longer than that, press CUE MARKER as long as you

want.

During cue and review, you will hear the beep sound at

the signal position. During playback, you will hear the

signal with low frequency sound at the signal position.

Notes

• We recommend recording cue markers when there is a break in the

sound.

• During cue and review, the beep sounds differently.

• The beep may sound differently depending on the marked position

on the tape because the winding speed varies from the beginning

to the end of the tape.

Playing a Tape (see Fig. C)

1 Insert a cassette with the side to start playing facing

the lid.

2 Select the tape speed to the same speed as that used

for recording.

3 Press 9.

4 Adjust the volume.

Polarity of the plug

Batteries

Battery life (Approx. hours)

Rechargeable batteries (supplied with

M-679V only)

Charge the rechargeable batteries only with the supplied

charge adaptor and the AC power adaptor. The

rechargeable batteries can be charged approximately 500

times.

Be sure to charge the rechargeable batteries for

approximately 8 hours before using them. The unit can

be used for recording for approximately 5.5 hours with

the fully charged rechargeable batteries.

To charge (see Fig. A-e)

The power indictor of the charge adaptor remains lit as

long as power is supplied from the wall outlet.

To use (see Fig. A-a)

Notes

• Use the supplied two rechargeable batteries only with the supplied

charge adaptor.

• If there is distortion of sound or excessive noise, or if the unit does

not operate properly, turn off the unit and recharge the two

rechargeable batteries together.

• The rechargeable batteries will discharge even when not in use. Be

sure to charge them before use.

• Recharge the two rechargeable batteries together. Otherwise, the

charging cannot be done.

• Be sure to remove the rechargeable batteries from the charge

adaptor to avoid overcharging (more than 20 hours) when

charging has been completed.

• Charging and operation should be made in temperature ranges 5°C

to 40°C (40°F to 104°F).

• The charge adaptor will become warm during charging but this is

not a sign of problem.

• Do not use or leave the charge adaptor in a location near heat

sources or in a place subject to direct sunlight or excessive

moisture.

• Unplug the AC power adaptor from the wall outlet when it is not

to be used for long.

• Do not attempt to charge dry batteries.

Recording (see Fig. B-a)

Make sure that nothing is connected to MIC.

1 Press the reset button of the TAPE COUNTER.

2 Press p6 and insert a standard microcassette with

the side to start recording facing the lid (see Fig. B-

b).

3 Select the desired tape speed.

2.4 cm for optimum sound (recommended for normal

use): A 30-minute recording can be made using both

sides of the MC-30 microcassette.

1.2 cm for longer recording time: A 60-minute

recording can be made using both sides of the MC-30

microcassette.

Sony R6P (SR)

Sony alkaline LR6 (SG)

NC-AA (M-679V only)

Recording

5.5

19.0

5.5

House Current (see Fig. A-d)

Connect the AC power adaptor to DC IN 3V and to a

wall outlet. Use the AC power adaptor (supplied with M-

679V only) or AC-E30HG AC power adaptor (not

supplied). Do not use any other AC power adaptor.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Sony M-679V Cassetterecorder. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Sony. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Sony M-679V Cassetterecorder in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Sony Cassetterecorders
Meer handleidingen voor Cassetterecorders

Gerelateerde producten

Handleiding

Sony WM-EX678 Walkman Cassetterecorder

Handleiding

Sony M-98V Cassetterecorder

Handleiding

Sony WM-FS191 Walkman Cassetterecorder

Handleiding

Sony WM-FX121 Walkman Cassetterecorder

Handleiding

Sony WM-GX100 Walkman Cassetterecorder

Handleiding

Sony WM-EX352 Walkman Cassetterecorder

Handleiding

Sony M-455 Cassetterecorder

Handleiding

Sony WM-FX423 Walkman Cassetterecorder

Gerelateerde categorieën