Handleiding Teknetics T2 Metaaldetector

Handleiding

36 5

TEKNETICS

Comprehensive Operating Manual & Guide to Metal Detecting

TEKNETICS

Comprehensive Operating Manual & Guide to Metal Detecting

MECHANICALS

Assembly

Caution:

Forcing in MIDDLE STEM with CAM LOCK raised may form a burr on

camlock. If this happens, remove burr with knife to allow insertion.

1 Position S-Rod upright.

2 Rotate the LOCKING COLLAR fully in the

counterclockwise direction.

3 Insert your finger inside the tube and make sure the

INTERNAL CAM LOCK is flush with the inside of the

tube.

4

Insert the MIDDLE STEM into the S-ROD,

with the SILVER BUTTON pointed upward

5 Rotate the MIDDLE STEM until the SILVER BUTTON

locates in the hole.

6 Twist the LOCKING COLLAR fully in the clockwise direction

until it locks.

7 Repeat this process on the LOWER STEM.

8 Using the BOLT and KNURLED KNOB, attach the

SEARCHCOIL to the LOWER STEM.

9

Adjust the LOWER STEM to a length that lets you maintain a

comfortable upright posture, with your arm relaxed at your side,

and the SEARCHCOIL parallel to the ground in front of you.

10

Wind the CABLE securely around the STEMS.

11

Connect CABLE PLUG to housing.

Do not twist the Cable or Plug. Turn Locking Ring only. Use

minimal finger pressure to start the threads. Do not cross-

thread. When the Locking Ring is fully engaged over the

threaded connector, give it a firm turn to make sure that it

is very tight. When the Locking Ring is fully engaged over

the threaded connector, it may not cover all of the threads.

12 Tighten both LOCKING COLLARS.

S-ROD

LOCKING

COLLAR

INTERNAL

CAM LOCK

SILVER BUTTON

MIDDLE

STEM

S-ROD

MIDDLE STEM

●

2

●

3

●

4

●

4

●

5

*

Note: Very tall users can purchase the optional Extended Lower Stem (TUBE5X), for extended reach.

Detecting Activities (continued)

Cache Hunting

(continued)

stories about the circumstances surrounding the hiding of the cache, you may find discrepancies

which help you to judge the reliability of the information available. Often the best information on

an old cache is to be learned from old timers who live in the area where the cache is thought to

be. In the case of newer caches, often the only information is what can be obtained from family

and acquaintances of the person who is believed to have hidden the cache.

The ownership of a cache is not always clear. Sometimes it belongs to the person or heirs of

the person who hid it, sometimes it belongs to the owner of the property on which it is located,

and sometimes it belongs to the person who finds it — or some combination of the above. If

the contents of the cache were stolen, this fact can also complicate the question of ownership.

Find out what laws apply to the cache in question, and always make sure that the issue of

ownership is resolved prior to recovering a cache.

Compared to a coin, a cache is usually large and deep. Searching in All Metal Mode is

recommended. However, for a really deep cache, it may be advantageous to search in

Pinpoint, frequently releasing the trigger momentarily to maximize sensitivity.

Shallow Water Hunting

All First Texas Products searchcoils are waterproof, allowing you to search in shallow water

about two feet deep. If searching around water, be careful not to get the electronics housing

wet. Avoid salt spray, as it will work its way into the control housing and damage the

electronics — such damage is not covered by the warranty.

Both fresh and salt water beaches are popular places for metal detecting. Vacationers lose money

and jewelry playing in the sand and in the water. It is usually easy to dig in a beach environment,

and metal detecting is permitted on most beaches. Occasionally you may be able to help someone

recover a piece of jewelry they have lost minutes before, this is a gratifying experience.

When searching on a beach, it is best to either search in All Metal Mode, or to search with the

discrimination level set just high enough to eliminate iron, because the value of beach finds is

largely in the jewelry rather than in the coins. You will dig a lot of aluminum trash, but the

digging is easy, and you can tell people that you are helping to clean up the beach and make

it safer for people’s feet. We recommend the use of special

sand scoop for recovering

valuables from the sand quickly — most metal detector dealers sell these.

The electrical conductivity of the water itself can pose some challenges. You may get false

signals when going into and coming out of the water, making it necessary to pay careful

attention to keep the coil either in or out of the water, but not to touch the surface. This effect

may be observed in either fresh or salt water.

Salt water is highly conductive, and produces a strong signal which is like that of metal.

Therefore the

T

2

is not suitable for use in or over salt water. In order to use the T

2

over wet

sand, or salt water beaches, do the following:

1. Set the sensitivity in both modes to 30 or less.

2. Ground cancel the machine manually in All Metal Mode.

3. Search in the Discrimination Mode with a discrimination setting higher than 45, using

the 1+ # OF TONES method.

Menu

Button

Settings

Switch

Release Clip

Battery Compartment

Hand-grip

2-way

adjustable

armrest

On/Off &

Volume

Switch

Headphone Jack

Searchcoil

Cable

Upper

Stem

Biaxial

Searchcoil

Dual-function

Trigger switch

S-Rod

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Teknetics T2 Metaaldetector. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Teknetics. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Teknetics T2 Metaaldetector in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Teknetics Metaaldetectors
Meer handleidingen voor Metaaldetectors

Veelgestelde vragen over Teknetics T2 Metaaldetector

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Bounty Hunter Lone Star Pro Metaaldetector

Handleiding

Fisher 1266-XB Metaaldetector

Handleiding

Velleman CS130 Metaaldetector

Handleiding

Minelab F3 Metaaldetector

Handleiding

Viking 1 Metaaldetector

Handleiding

Skytronic 499.920 Metaaldetector

Handleiding

Velleman CS250 Metaaldetector

Handleiding

Bresser 9820401 Freek Vonk Metaaldetector

Gerelateerde categorieën