Handleiding Toyota ESM325 (Dfl) Naaimachine

Handleiding

4

English

“IMPORTANT SAFETY INSTRUCTIONS”

When using the sewing machine, basic safety precautions

should always be followed, including the following:

Read all instructions before using.

DANGER

-

-

To reduce the risk of electric shock.

1 The sewing machine should never be left unattended when plugged in. Always unplug the sewing

machine from the electrical outlet immediately after using and before cleaning.

2. Always unplug before relamping. Replace the bulb with same type rated 15 watts.

3. Do not reach for the sewing machine that has fallen into water. Unplug immediately.

4. Do not place or store sewing machine where it can fall or be pulled into a tub or sink. Do not place or

drop into water or other liquid.

WARNING

-

-

To reduce the risk of burns, fire, electric shock, or injury to

persons.

1 Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by

or near children.

2. Use this sewing machine only for its intended use as described in this manual. Use only attachments

recommended by the manufacturer as contained in this manual.

3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it

has been dropped or damaged, or dropped into water. Return this sewing machine to the nearest

authorized dealer or service center for examination, repair, electrical or mechanical adjustment.

4. Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the

sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth.

5. Never drop or insert any object into any opening.

6. Do not use outdoors.

7. Do not operate where aerosol (spray) products are being used or where oxygen is being

administered.

8. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the sewing machine

needle.

11. Always use proper needle plate. The wrong plate can cause the needle to break.

12. Do not use bent needles.

13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

14. Switch the sewing machine off (“O”) when making any adjustments in the needle area, such as

threading needle, changing needle, threading bobbin, or changing presser foot, etc.

15. Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when

making any other user servicing adjustments mentioned in this instruction manual.

16. Never operate on a soft surface such as a bed or couch where the air openings may be blocked.

17. Appliance (230-240V) is provided with double insulation. Use only identical replacement parts. See

instructions for servicing Double-insulate Products.

Servicing Double-Insulated Products (220V-240V)

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding

means is provided on a double-insulated product nor should a means for grounding be added to the product

Servicing a double-insulated product requires extreme care and knowledge of the system and should only

be done by qualified service personnel. Replacement parts for a double-insulated product must be identical

to those parts in the product. The symbol is marked on the double-insulated product.

This sewing machine is intended for household use.

SAVE THESE INSTRUCTIONS

UK ONLY IMPORTANT PLEASE READ CAREFULLY

The wires in this mains lead are coloured in accordance with the following code:

BLUE - NEUTRAL BROWN - LIVE (OR ACTIVE)

As the colours of the mains lead of this appliance may not correspond with the coloured markings identifying

the terminals in your plug PROCEED AS FOLLOWS:

The earth plug pin is unnecessary. As the machine is designed under double insulation structure, the earth

wire is removed from the machine. The wire coloured BROWN must be connected to the terminal marked

L or A or coloured RED. The wire coloured BLUE must be connected to the terminal marked N or coloured

BLACK. Neither core is to be connected to the earth terminal of a three-pin plug.

Quilt60_EFNI.book Page 4 Thursday, March 30, 2006 3:44 PM

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Toyota ESM325 (Dfl) Naaimachine. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Toyota. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Toyota ESM325 (Dfl) Naaimachine in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Toyota Naaimachines
Meer handleidingen voor Naaimachines

Veelgestelde vragen over Toyota ESM325 (Dfl) Naaimachine

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Toyota ESS224 Naaimachine

Handleiding

Toyota SPB15 Naaimachine

Handleiding

Toyota 9600 Naaimachine

Handleiding

Toyota SPA15 Naaimachine

Handleiding

Toyota RS2000-2D Naaimachine

Handleiding

Toyota ESY221 Naaimachine

Handleiding

Toyota ECO15CB Naaimachine

Handleiding

Toyota 4070 Naaimachine

Gerelateerde categorieën