Handleiding Troy-Bilt Mustang 46 XP Grasmaaier

Handleiding

3Section 2 — important Safe operation practiceS

Do:

1. Mow across slopes, not up and down.

Exercise extreme caution when changing

direction on slopes.

2. Watch for holes, ruts, bumps, rocks, or

other hidden objects. Uneven terrain could

overturn the machine. Tall grass can hide

obstacles.

3. Use slow speed. Choose a low enough

speed so that you will not have to stop while

on the slope. Avoid starting or stopping on

a slope. If the tires are unable to maintain

traction, disengage the blades and proceed

slowly and carefully straight down the slope.

4. Follow the manufacturer’s

recommendations for wheel weights or

counterweights to improve stability.

5. Use extra care with grass catchers or other

attachments. These can change the stability

of the machine.

6. Keep all movement on the slopes slow and

gradual. Do not make sudden changes

in speed or direction. Rapid acceleration

or deceleration could cause the front of

the machine to lift and rapidly roll over

backwards, which could cause serious injury.

Do Not:

1. Do not turn on slopes unless necessary;

then turn slowly uphill and use extra care

while turning.

2. Do not mow near drop-offs, ditches or

embankments. The mower could suddenly

turn over if a wheel is over the edge of a cliff,

ditch, or if an edge caves in.

3. Do not try to stabilize the machine by

putting your foot on the ground.

4. Do not use a grass catcher on steep slopes.

5. Do not mow on wet grass. Reduced traction

could cause sliding.

Children

1. Tragic accidents can occur if the operator is

not alert to the presence of children. Children

are often attracted to the machine and the

mowing activity. They do not understand

the dangers. Never assume that children will

remain where you last saw them.

a. Keep children out of the mowing

area and in watchful care of a

responsible adult other than the

operator.

b. Be alert and turn machine off if a

child enters the area.

c. To avoid back-over accidents,

always look behind and down for

small children.

d. Never carry children, even with the

blade(s) shut off. They may fall off and

be seriously injured or interfere with

safe machine operation.

e. Use extreme care when approaching

blind corners, doorways, shrubs,

trees or other objects that may block

your vision of a child who may run

into the path of the machine.

f. Keep children away from hot or

running engines. They can suffer

burns from a hot muffler.

g. Remove key when machine is

unattended to prevent

unauthorized operation.

2. Never allow children under 14 years of

age to operate this machine. Children 14

and over should read and understand the

instructions and safe operation practices in

this manual and on the machine and should

be trained and supervised by an adult.

Service

Safe Handling of Gasoline:

1. To avoid personal injury or property damage

use extreme care in handling gasoline.

Gasoline is extremely flammable and

the vapors are explosive. Serious personal

injury can occur when gasoline is spilled

on yourself or your clothes which can

ignite. Wash your skin and change clothes

immediately.

a. Use only an approved gasoline

container.

b. Never fill containers inside a vehicle

or on a truck or trailer bed with a

plastic liner. Always place containers

on the ground away from your

vehicle before filling.

c. When practical, remove gas-

powered equipment from the truck

or trailer and refuel it on the ground.

If this is not possible, then refuel

such equipment on a trailer with a

portable container, rather than from

a gasoline dispenser nozzle.

d. Keep the nozzle in contact with the

rim of the fuel tank or container

opening at all times until fueling is

complete. Do not use a nozzle lock-

open device.

e. Extinguish all cigarettes, cigars,

pipes and other sources of ignition.

f. Never fuel machine indoors.

g. Never remove gas cap or add fuel

while the engine is hot or running.

Allow engine to cool at least two

minutes before refueling.

h. Never over fill fuel tank. Fill tank to

no more than ½” below bottom of

filler neck to allow space for fuel

expansion.

i. Replace gasoline cap and tighten

securely.

j. If gasoline is spilled, wipe it off

the engine and equipment. Move

machine to another area. Wait 5

minutes before starting the engine.

k. To reduce fire hazards, keep machine

free of grass, leaves, or other debris

build-up. Clean up oil or fuel spillage

and remove any fuel soaked debris.

l. Never store the machine or fuel

container inside where there is an

open flame, spark or pilot light as

on a water heater, space heater,

furnace, clothes dryer or other gas

appliances.

m. Allow a machine to cool at least five

minutes before storing.

General Service

1. Never run an engine indoors or in a poorly

ventilated area. Engine exhaust contains

carbon monoxide, an odorless, and deadly gas.

2. Before cleaning, repairing, or inspecting,

make certain the blade(s) and all moving

parts have stopped. Disconnect the spark

plug wire and ground against the engine to

prevent unintended starting.

3. Periodically check to make sure the

blades come to complete stop within

approximately (5) five seconds after

operating the blade disengagement control.

If the blades do not stop within the this time

frame, your machine should be serviced

professionally by an authorized dealer.

4. Regularly check the safety interlock system

for proper function, as described later in this

manual. If the safety interlock system does not

function properly, have your machine serviced

professionally by an authorized dealer.

5. Check the blade(s) and engine mounting

bolts at frequent intervals for proper

tightness. Also, visually inspect blade(s) for

damage (e.g., excessive wear, bent, cracked).

Replace the blade(s) with the original

equipment manufacturer’s (O.E.M.) blade(s)

only, listed in this manual. “Use of parts

which do not meet the original equipment

specifications may lead to improper

performance and compromise safety!”

6. Mower blades are sharp. Wrap the blade or

wear gloves, and use extra caution when

servicing them.

7. Keep all nuts, bolts, and screws tight to be sure

the equipment is in safe working condition.

8. Never tamper with the safety interlock

system or other safety devices. Check their

proper operation regularly.

9. After striking a foreign object, stop the

engine, disconnect the spark plug wire(s)

and ground against the engine. Thoroughly

inspect the machine for any damage. Repair

the damage before starting and operating.

10. Never attempt to make adjustments or repairs

to the machine while the engine is running.

11. Grass catcher components and the

discharge cover are subject to wear and

damage which could expose moving parts

or allow objects to be thrown. For safety

protection, frequently check components

and replace immediately with original

equipment manufacturer’s (O.E.M.) parts

only, listed in this manual. “Use of parts

which do not meet the original equipment

specifications may lead to improper

performance and compromise safety!”

12. Do not change the engine governor settings

or over-speed the engine. The governor

controls the maximum safe operating speed

of the engine.

13. Maintain or replace safety and instruction

labels, as necessary.

14. Observe proper disposal laws and regulations

for gas, oil, etc. to protect the environment.

15. According to the Consumer Products Safety

Commission (CPSC) and the U.S. Environmental

Protection Agency (EPA), this product has an

Average Useful Life of seven (7) years, or 270

hours of operation. At the end of the Average

Useful Life have the machine inspected

annually by an authorized service dealer to

ensure that all mechanical and safety systems

are working properly and not worn excessively.

Failure to do so can result in accidents, injuries

or death.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Troy-Bilt Mustang 46 XP Grasmaaier. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Troy-Bilt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Troy-Bilt Mustang 46 XP Grasmaaier in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Troy-Bilt Grasmaaiers
Meer handleidingen voor Grasmaaiers

Veelgestelde vragen over Troy-Bilt Mustang 46 XP Grasmaaier

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Troy-Bilt TB WC33 XP Grasmaaier

Handleiding

Troy-Bilt TB410 XP Grasmaaier

Handleiding

Troy-Bilt TB230 Grasmaaier

Handleiding

Troy-Bilt TB220 Grasmaaier

Handleiding

Troy-Bilt Mustang Pivot 46 Grasmaaier

Handleiding

Troy-Bilt TB490 XP Grasmaaier

Handleiding

Troy-Bilt TB200 Grasmaaier

Handleiding

Troy-Bilt TB130 XP Grasmaaier

Gerelateerde categorieën