Handleiding Troy-Bilt TB4516CC Kettingzaag

Handleiding

16

MAINTENANCE AND REPAIR INSTRUCTIONS

If the chain and

motor fail to stop

when the Chain Brake® is engaged, take

the saw to the nearest Authorized Service

Center. Do not use the saw if the Chain

Brake® is not in proper working order.

WARNING:

CHAIN BRAKE® TEST

Before cutting with your saw, the Chain Brake® should

be tested as follows:

A. Make sure the Chain Brake® is disengaged (Fig. 26).

B. Place the saw on a firm, flat, dry surface that is clear

of any debris. Do not let the saw come in contact

with any objects.

C. Plug the unit into the power source.

D. Grasp the front handle (not the Chain Brake®/Hand

Guard Lever) with your left hand. Thumb and fingers

should encircle the handle.

E. Grasp the rear handle with your right hand. Thumb

and fingers should encircle the handle.

F. Depress the LOCK/OFF button with your right thumb.

Squeeze the trigger with your index finger (Fig. 7).

G. While the motor is running, activate the Chain

Brake® by rolling your left hand forward against the

lever.

H. Chain and motor should stop abruptly.

A cord that is hot to

the touch is

overloaded.

CAUTION:

Your double

insulated appliance

has no serviceable parts inside. Do not

attempt to repair it yourself. For service

information, dial 1-800-520-5520.

WARNING:

Do not operate your

chain saw in a wet or

damp environment. Do not expose the saw to

rain, snow or sleet. Moisture will cause short

circuits. Replace or repair any damaged or

frayed extension cords before using your saw.

Keep the cord away from the cutting area and

position the cord so that it will not be caught

on branches or other objects during cutting.

WARNING:

EXTENSION CORDS

When using an electric chain saw, plug it into the

extension cord only when you are ready to cut wood.

Connect the extension cord to a 110/120 voltage outlet.

Refer to the Electrical Safety Warnings section.

DOUBLE INSULATION

WHEN SERVICING, USE ONLY IDENTICAL

REPLACEMENT PARTS.

Information

Do not use if the cord or plug is damaged. Your

appliance is double insulated to help protect against

electric shock. Double insulation construction consists of

2 separate “layers” of electrical insulation.

Appliances built with this insulation system are not

intended to be grounded. As a result, the extension cord

used with your appliance can be plugged into any

conventional 120 volt electrical outlet.

Normal safety precautions must be observed when

operating an electrical appliance. The double insulation

system is only for added protection against injury resulting

from a possible internal electrical insulation failure.

In this double insulated appliance, 2 systems of insulation,

instead of grounding, are provided. No grounding means

is provided on a double insulated appliance, nor should a

means for grounding be added to the appliance. No

serviceable parts are inside. A double insulated appliance

is marked with the words, “DOUBLE INSULATION” or

“DOUBLE INSULATED.” The symbol (square within a

square) may also be marked on the appliance.

Maintenance

1. Place switch in OFF position and unplug the power

supply before the appliance is serviced, cleaned, or

maintenance is performed.

2. Keep the air intake clean and air vents free of debris

to avoid overheating the motor.

3. Clean with a damp sponge and mild soap. Do not

squirt with a water hose or douse with water or other

liquids.

4. Inspect the saw chain for proper tension before each

use and frequently during cutting. Sharpen as required.

5. Clean the guide bar and bar pad to ensure free path

for oil.

6. No motor lubrication is necessary. The motor is

equipped with lifetime lubricated bearings.

7. If the saw does not operate, turn switch to OFF

position and disconnect the extension cord, first from

the power supply, then from the saw. Check the

power supply for blown fuses or tripped circuit

breakers. If it still does not operate, contact a

Product Service Department. Call 1-800-520-520 for

more information.

Do not attempt to repair it yourself. No serviceable

parts are inside.

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Troy-Bilt TB4516CC Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Troy-Bilt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Troy-Bilt TB4516CC Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Troy-Bilt Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Troy-Bilt TB4516CC Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Troy-Bilt TB4218CC Kettingzaag

Handleiding

Troy-Bilt TB4920CC Kettingzaag

Handleiding

Troy-Bilt TB4016CC Kettingzaag

Handleiding

Troy-Bilt TB4620CC Kettingzaag

Handleiding

Troy-Bilt TB3516 Kettingzaag

Handleiding

Stihl GTA 26 Kettingzaag

Handleiding

Parkside IAN 327520 Kettingzaag

Handleiding

Greencut OH650X Kettingzaag

Gerelateerde categorieën