Handleiding Troy-Bilt TB4516CC Kettingzaag

Handleiding

18

MAINTENANCE AND REPAIR INSTRUCTIONS

Never have more

than 3 links

removed from a loop of chain. This could

cause damage to the sprocket.

WARNING:

Chain Lubrication

Always make sure the automatic oiler system is working

properly. Keep the oil tank filled with Genuine Factory

Parts Chain, Bar and Sprocket Oil.

Adequate lubrication of the bar and chain during cutting

operations is essential to minimize friction with the guide bar.

Never starve the bar and chain of lubricating oil. Running

the saw dry or with too little oil will decrease cutting

efficiency, shorten saw chain life, cause rapid dulling of

chain, and lead to excessive wear of bar from

overheating. Too little oil is evidenced by smoke or bar

discoloration.

Chain Sharpening

Chain sharpening requires special tools to ensure that

cutters are sharpened at the correct angle and depth. For

the inexperienced chain saw user, we recommend that

the saw chain be professionally sharpened by the

nearest Authorized Service Center. If you feel

comfortable sharpening your own saw chain, special

tools are available from your Authorized Service Center.

CHAIN MAINTENANCE

A low-kickback saw chain should always be used in

conjunction with other kickback protection devices such

as the Chain Brake®/Hand Guard furnished with your unit.

Always use a replacement saw chain designed as “low-

kickback” or a saw chain which meets the low-kickback

performance requirements of ANSI (American National

Standards Institute).

A standard saw chain (a chain which does not have the

kickback reducing guard links) should only be used by an

experienced professional chain saw operator.

What is a Low-Kickback Saw Chain?

A low-kickback saw chain is a chain which has met the

kickback performance requirements of ANSI B175.1.

By keeping the Chain Brake® and saw chain in good

working condition and correctly serviced as

recommended in this manual, you will be able to

maintain the safety system of your chain saw over the life

of the product.

Chain Tension

Check the chain tension frequently and adjust as often as

necessary to keep the chain snug on the bar, but loose

enough to be pulled around by hand.

Breaking in a New Saw Chain

A new chain and bar will need chain readjustment after

as few as 5 cuts. This is normal during the break-in

period, and the interval between future adjustments will

begin to lengthen quickly.

Over a period of time, however, the moving parts of the

saw chain will become worn, resulting in what is called

CHAIN STRETCH. This is normal. When it is no longer

possible to obtain correct chain tension adjustment, a

link will have to be removed to shorten the chain. See

your Authorized Service Center to have this repair

performed.

Unless you have

experience and

specialized training for dealing with

kickback (see Safety Precautions), always

use a low-kickback saw chain, which

significantly reduces the danger of

kickback. Low-kickback saw chain does

not completely eliminate kickback. A low-

kickback or “safety chain”, should never be

regarded as total protection against injury.

WARNING:

Never remove,

modify or make

inoperative any safety device furnished with

your unit. The Chain Brake® / Hand Guard

and low-kickback saw chain are major

safety features provided for your protection.

WARNING:

CHAIN REPLACEMENT INFORMATION

There may be other quality equivalent replacement

components for achieving kickback protection.

Bar Length Drive Links

Part Number

16” Bar 55 DL

49M1655P753

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Troy-Bilt TB4516CC Kettingzaag. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Troy-Bilt. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Troy-Bilt TB4516CC Kettingzaag in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Troy-Bilt Kettingzagen
Meer handleidingen voor Kettingzagen

Veelgestelde vragen over Troy-Bilt TB4516CC Kettingzaag

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Beoordeling

Gerelateerde producten

Handleiding

Troy-Bilt TB4218CC Kettingzaag

Handleiding

Troy-Bilt TB4920CC Kettingzaag

Handleiding

Troy-Bilt TB4016CC Kettingzaag

Handleiding

Troy-Bilt TB4620CC Kettingzaag

Handleiding

Troy-Bilt TB3516 Kettingzaag

Handleiding

Stihl GTA 26 Kettingzaag

Handleiding

Parkside IAN 327520 Kettingzaag

Handleiding

Greencut OH650X Kettingzaag

Gerelateerde categorieën