Handleiding Vivanco UR 89 Afstandsbediening

Handleiding voor je Vivanco UR 89 Afstandsbediening nodig? Hieronder kun je de handleiding gratis bekijken en downloaden als PDF in het Nederlands en/of Engels. Dit product heeft 6 veelgestelde vragen, 4 comments en heeft 36 stemmen met een gemiddelde score van 31/100. Is dit niet de handleiding die je zoekt, neem dan contact met ons op.

Is je product kapot en biedt de handleiding geen oplossing meer? Dan kun je voor reparatie gratis terecht bij Repair Café.

Handleiding

Loading…

UR 89 Universal Controller
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 1
(GB) Instructions
Vivanco UR 89 remote control for almost
all TV, audio, video and other infrared-
controllable equipment
Inserting the batteries
Open the battery flap on the back of the
remote control, press the tongue lightly
upwards, then insert 2 alkaline AAA batteries.
Check that the polarity markings on the
batteries and in the battery compartment are
correctly lined up (+=+), then close the flap
carefully. – Always use undamaged batteries.
Adapting to appliances
In order to control your appliances you must
adapt or set the remote control to them. There
are two ways of doing so: direct control code
entry or code search.
If your UR 89 does not understand you it
blinks twice several times and you can then
repeat the entry. Each understood entry is
confirmed by an appliance button blinking
once briefly.
Direct control code entry using the
enclosed list
Example: setting to control a Panasonic
television set:
1. The enclosed list gives, for example, the
Panasonic Code 154.
Please make sure you have selected the
correct list for television sets (TV).
2. To prepare code entry, press the SET
button, bottom right, keep it pressend and
then press the required appliance button, e.g.
TV, additionally until the lamp (LED) lights
constantly.
3. Then press the number buttons (e.g. 1 5
4) in sequence.
4. Once the numbers have been entered
the button lamp goes out and the remote
control is ready to control your appliance.
5. Finally, test the control code setting by
trying to control (in this example) your
television set. If it does not work at all or not
correctly try a different code from the list or
the code search (see below).
6.
To set the remote control for other
appliances, proceed in the same way. Instead
of the TV appliance button, press another
button (e.g. VCR, CBL/SAT(DVB,
DECODER), DVD, TUNER, TAPE, CD,
AMP).
Code search
If the brand of your appliance is not in the list
or none of the codes given fits, we
recommend a code search.
Manual code search
1. Switch on the appliance to be controlled.
Program is running.
2. To prepare code search, press the SET
button, bottom right, keep it pressend and
then press the required appliance button, e.g.
TV, additionally until the lamp (LED) lights
constantly.
3. Then point the remote control at the
appliance to be controlled.
4. Briefly press the ON/OFF
(appliance on/off) button once. The lamp
(LED) blinks. Except when searching for a
TV code you can also briefly press the yellow
> (Play) button and use the Play function to
search. Make sure that a tape, a DVD or a CD
is inserted in the tape deck, player or
recorder.
5. Press the ON/OFF (appliance
on/off) or Play button repeatedly, approx.
every second, until the appliance, e.g. your
DVD player, reacts. - If you notice the reaction
of your appliance too late and the next code
has already been emitted you can go back by
pressing SET and then ON/OFF or Play
again. If your appliance has switched itself off
you must switch it back on again, e.g. on the
appliance or with the original remote control,
to continue searching. - When your appliance
reacts you can also try out other buttons
without interrupting the search. If some
buttons do not work properly, simply continue
searching with ON/OFF or Play.
6. When your appliance reacts correctly,
press the appliance button, e.g. TV, and end
the search. The lamp (LED) goes out.
- The UR 89 continues with the search at the
point where you interrupted it. When the end
of the code list is reached the search stops
automatically. The remote control blinks
quickly several times. The code last entered
remains stored. The search stops after
approx. 30 seconds of inactivity.
Automatic code search *
Your remote control finds the correct settings
almost automatically in seconds:
1. Switch on the appliance to be controlled.
A channel number, for example, appears in
the display of your satellite receiver.
2. To start the code search, press the SET
button, bottom right, and then additionally the
required appliance button, e.g. TV, for more
than 3 seconds until the lamp (LED) starts to
blink.
3. Then point the remote control at the
appliance to be controlled while the remote
control emits a different ON/OFF signal every
2 seconds.
4. When your appliance reacts, press any
button, except SET, to end the search. – If
you ended the search too late, continue to
search using the Manual Code Search (see
above).
5. Finally, test the control code setting by
trying to control, for example, your DVD
appliance. If it does not work correctly, please
try the code search again. The code search
then begins with the next code in the
sequence. - Remember to switch your
appliance, e.g. DVD, back on again if you
wish to continue searching.
Download de handleiding in het Nederlands en/of Engels (PDF, 0.36 MB)
(Denk aan het milieu en print deze handleiding alleen als dat echt noodzakelijk is)

Loading…

Beoordeling

Laat ons weten wat je van de Vivanco UR 89 Afstandsbediening vindt door een beoordeling achter te laten. Wil je je ervaringen met dit product delen of een vraag stellen? Laat dan een bericht achter onderaan de pagina.
Bent u tevreden over de Vivanco UR 89 Afstandsbediening?
Ja Nee
31%
69%
36 stemmen

Praat mee over dit product

Laat hier weten wat jij vindt van de Vivanco UR 89 Afstandsbediening. Als je een vraag hebt, lees dan eerst zorgvuldig de handleiding door. Een handleiding aanvragen kan via ons contactformulier.

pepi 28-04-2020
Alsjeblieft in het Spaans, we kennen allemaal geen Engels

beantwoord | Ik vind dit nuttig (3) (Vertaald door Google)
Klaus König 03-01-2020
Na proberen te coderen werkt niets, kan het zijn dat ik daardoor de afstandsbediening heb geblokkeerd?

beantwoord | Ik vind dit nuttig (0) (Vertaald door Google)
pepi 28-04-2020
Alsjeblieft in het Spaans, we kennen allemaal geen Engels

beantwoord | Ik vind dit nuttig (0) (Vertaald door Google)
Heinz Thum 26-10-2021
Stuur mij alstublieft een gebruiksaanwijzing in het Duits naar mijn e-mailadres h. thum @ unitybox.de

beantwoord | Ik vind dit nuttig (0) (Vertaald door Google)

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Vivanco UR 89 Afstandsbediening. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Vivanco. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Vivanco UR 89 Afstandsbediening in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Merk Vivanco
Model UR 89
Categorie Afstandsbedieningen
Bestandstype PDF
Bestandsgrootte 0.36 MB

Alle handleidingen voor Vivanco Afstandsbedieningen
Meer handleidingen voor Afstandsbedieningen

Veelgestelde vragen over Vivanco UR 89 Afstandsbediening

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Hoe koppel ik een universele afstandsbediening aan mijn televisie? Geverifieerd

Om je universele afstandsbediening te koppelen heb je zowel het modelnummer en het merk van de afstandsbediening als die van de televisie nodig. In de handleiding van de afstandsbediening is een lijst te vinden met merken en/of modelnummers met een bijbehorende code.

Ik vind dit nuttig (7280) Lees meer

Waarom staan er letters bij de cijfers op de afstandsbediening? Geverifieerd

Het kan mogelijk zijn dat het voor bepaalde instellingen van de televisie nodig is om letters in te voeren. Er staan doorgaans drie letters of andere tekens op een knop. Wanneer letterinvoer nodig is, kan er 1 keer op die knop gedrukt worden worden de eerste letter, 2 keer gedrukt voor de tweede letter en 3 keer gedrukt voor de derde letter. Zo kan er tekst geschreven worden met een minimaal aantal knoppen.

Ik vind dit nuttig (572) Lees meer

Werkt mijn afstandsbediening ook op andere modellen televisie van hetzelfde merk? Geverifieerd

Vaak werkt een afstandsbediening van een televisie ook op vergelijkbare modellen van hetzelfde merk. Het is echter ongebruikelijk dat hij op alle modellen van dat merk werkt. Universele afstandsbedieningen zijn daar beter voor geschikt.

Ik vind dit nuttig (416) Lees meer

Wat is het gemiddelde bereik van een infrarood afstandsbediening? Geverifieerd

Een gemiddelde infrarood afstandsbediening heeft een bereik van tussen de 3 en 6 meter. Het is ook zo dat hoe verder weg het apparaat staat, hoe moeilijker het is om te mikken.

Ik vind dit nuttig (357) Lees meer

Er is een batterij in mijn apparaat gaan oxideren, kan ik het nog veilig gebruiken? Geverifieerd

Ja, het apparaat kan nog veilig gebruikt worden. Verwijder eerst de geoxideerde batterij. Doet dit niet met blote handen. Reinig daarna het batterijcompartiment met een wattenstaafje gedipt in azijn of citroensap. Laat het drogen en doe nieuwe batterijen in het apparaat.

Ik vind dit nuttig (254) Lees meer

Kan ik een verwisselbare batterij een lange tijd in een apparaat laten? Geverifieerd

Verwisselbare batterijen kunnen een lange periode in een apparaat blijven indien dit apparaat gebruikt wordt. Als een apparaat voor een lange periode wordt opgeslagen is het aan te raden de batterijen er uit te halen om oxidatie te voorkomen.

Ik vind dit nuttig (203) Lees meer
Handleiding Vivanco UR 89 Afstandsbediening

Gerelateerde producten

Gerelateerde categorieën