Handleiding VonHaus 2515206 Heggenschaar

Handleiding

A5P | 01

personal injury.

Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool/

machine in unexpected situations.

Dress appropriately. Do not wear loose clothing or jew-

ellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

If devices are provided for the connection of dust

extraction and collection facilities, ensure these are con-

nected and properly used. Use of dust collection can

reduce dust-related hazards.

WORK AREA SAFETY Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tool/machine in explosive atmos-

pheres, such as in the presence of ammable liquids,

gases or dust.

Power tool/machine create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a

power tool/machine. Distractions can cause you to lose

control.

GENERAL POWER TOOL USE AND CARE Do not force

the power tool/machine. Use the correct power tool/ma-

chine for your application. The correct power tool/ma-

chine will do the job better and safer at the rate for which

it was designed.

Do not use the power tool/machine if the switch does not

turn it on and o. Any power tool/machine that cannot

be controlled with the switch is dangerous and must be

repaired.

Disconnect the plug from the power source and/or the

battery pack from the power tool/machine before making

any adjustments, changing accessories, or storing pow-

er tool/machine tools. Such preventive safety measures

reduce the risk of starting the power tool/machine ac-

cidentally.

Store idle power tool/machine out of the reach of children

and do not allow persons unfamiliar with the power tool/

machine or these instructions to operate the power tool/

machine.

Power tool/machines are dangerous in the hands of un-

trained users.

Maintain power tool/machines. Check for misalignment

or binding of moving parts, breakage of parts and any

other condition that may aect the power tool/machines

operation. If damaged, have the power tool/machines re-

paired before use. Many accidents are caused by poorly

maintained power tool/machines.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edg-

es are less likely to bind and are easier to control.

Use the power tool/machine accessories and tool bits in

accordance with these instructions, take into account the

working conditions and the work to be performed.

Use of the power tool/machine for operations dierent

from those intended could result in a hazardous situation.

CLEANING & MAINTENANCE Never soak or immerse

electrical components and or a component that has a

plug attached.

Disconnect the plug from the power source before mak-

ing any adjustments, changing accessories, or storing.

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally.

Ensure the motor has fully stopped before cleaning,

clearing a blockage, checking, or carrying out any main-

tenance on the tool.

Maintain your power tool. Check for misalignment or

binding of moving parts, breakage of parts and any oth-

er condition that may aect the power tool’s operation.

If damaged, have the power tool repaired by a qualied

repair person before use. Many accidents are caused by

poorly maintained power tools.

Keep

cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

Regularly check external nuts and xings to ensure vibra-

tion caused by normal use has not begun to loosen them.

Store idle power tools out of reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the Breaker.

Locate the power tool out of reach of children, in a dry,

locked unit.

Make sure that the cord is located so that it will not be

stepped on, tripped over, or otherwise subjected to

damage or stress.

Remove the plug from the mains socket / battery (where

applicable) before carrying out any adjustment or main-

tenance.

Always store the power tool/machine in a dry place.

If the power cord is damaged, it must be replaced by a

qualied service technician.

Keep the ventilation slots and motor housing as free of

dirt and dust as possible (where applicable).

Clean the power tool/machine by rubbing it with a clean

cloth and blow it clean using low-pressure compressed

air is recommended.

Ensure you have all the pieces listed. If you are missing

any components, contact our customer services

department at

[email protected] DO NOT proceed with assembly

if any components are missing.

LAWN TRIMMERS & LAWN EDGE TRIMMERS

Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may aect

the power tool’s operation.

Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting

accessory may contact hidden wiring or its own cord.

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

Keep hands away from cutting area. Never reach

underneath the workpiece for any reason. Do not insert

ngers or thumb into the vicinity of the blade and blade

release switch.

TECHNICAL SPECIFICATION

Rated Voltage 220V - 240V~

Rated Power 710W

Rated Frequency 50Hz

Cutting Length 61cm

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je VonHaus 2515206 Heggenschaar. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met VonHaus. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van VonHaus 2515206 Heggenschaar in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor VonHaus Heggenscharen
Meer handleidingen voor Heggenscharen

Veelgestelde vragen over VonHaus 2515206 Heggenschaar

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

VonHaus 2515067 Heggenschaar

Handleiding

VonHaus 2500264 Heggenschaar

Handleiding

VonHaus 2500257 Heggenschaar

Handleiding

VonHaus 2500190 Heggenschaar

Handleiding

VonHaus 3500193 Heggenschaar

Handleiding

VonHaus 3500228 Heggenschaar

Handleiding

VonHaus 2500263 Heggenschaar

Handleiding

VonHaus 2500259 Heggenschaar

Gerelateerde categorieën