Handleiding Vtech TM8212-2 Babyfoon

Handleiding

Caution

• The default volume of your parent unit is level 3. If you experience high-pitched screeching noise from

your baby monitor while positioning:

- Make sure your baby unit and parent unit are more than 6.5 feet (2 meters) apart, OR

- Turn down the volume of your parent unit.

Operating range

The operating range of the baby monitor is up to 1,000 feet (300 meters) outdoors or 160 feet

(50 meters) indoors. The actual operating range may vary depending on the environmental

conditions, and other interferences such as walls, doors, and other obstructions.

Install the parent unit battery

The parent unit runs on rechargeable battery or AC power. To continuously monitor your

baby, keep the parent unit connected to AC power. With the battery alone, the parent unit

can cordlessly run for a short time only.

NOTESNOTE

• Use only the battery supplied with this product.

• If the parent unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage.

Replace the battery

To replace the battery, unplug the battery connector from the socket, and then pull the

battery out of the battery compartment. Follow the steps above to install the battery.

Connect the baby monitor

NOTESNOTE

• Use only the power adapters supplied with this product.

• Make sure the baby monitor is not connected to an electric outlet that is controlled by a switch.

• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not

designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table,

or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

• With audio reminder feature preset to ON, the parent unit plays an audio reminder when it is

connected to a baby unit.

Charge the parent unit battery

When you have connected the parent unit and installed its battery for the first time or after

power outage, the parent unit powers on automatically. The battery icon indicates the

battery status (see the following table).

1 set for TM8212;

2 sets for TM8212-2

User’s manual

TM8212

TM8212-2

Digital Audio Monitor

Go to www.vtechphones.com

to register your product for enhanced

warranty support and the latest VTech

product news.

Congratulations

on purchasing your new VTech product. Before using this product, please read Important safety

instructions.

This manual has all the feature operations and troubleshooting necessary to install and operate

your new VTech product. Please review this manual thoroughly to ensure proper installation and

operation of this innovative and feature-rich VTech product.

For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.

What’s in the box

1

Connect and charge the battery

NOTESNOTE

Notes

• The parent unit battery is fully charged after 11 hours of continuous charging.

• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time,

turn the parent unit off while charging.

• The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery.

Battery indicators Battery status Action

The battery icon is off. No battery is installed but

operates using AC power.

Install the parent unit battery.

Charge without interruption (at least

30 minutes).

The screen displays LOW

BATTERY and . The light

flashes.

The battery has very little

charge and may be used

for only a short time.

Charge

without interruption

(about

30 minutes).

The battery icon becomes

solid .

The battery is fully charged. To keep the battery charged, connect

it to AC power when not in use.

Batt

ery Pack /

Bloc-pil

es :

BT183342/

BT283342 (2.

4V 400m

Ah Ni-M

H)

W

AR

NI

NG / AVER

TI

SSEMENT :

DO

NOT BURN OR PUNCTURE BATTERIE

S.

NE

PAS INCINÉRE

R OU PERCE

R

LES PI

LES.

Made

in China /

Fabriqué en chine

CR0920

THIS SID

E UP / CE CÔTÉ VERS LE HAUT

THIS SIDE UP

2

:

AVE

R

TIS

SEMENT :

THIS SIDE UP / CE CÔTÉ

:

AVER

TISS

EMENT :

TTERI

HIS SIDE UP / CE CÔTÉ VERS L

1

2

3

NOTESNOTE

Note

Make sure the label

THIS SIDE UP is facing

up while inserting the

battery.

4

LINKED

LINKED

LINKED

6.5ft (2m)

>

Note

• This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and

should not be used as such.

Test your audio monitor

You may test the baby monitor before initial use, and at regular times thereafter.

Caution

• For hearing protection, make sure the parent unit is more than

6.5 feet (2 meters) away from the baby unit. If you hear any

high-pitched noise, move the parent unit further until the noise

stops. You can also press on the parent unit to lower or mute

the noise.

1. Make sure your baby unit and parent unit are on.

2. Speak towards the microphone of the baby unit. You will

hear the sound at the parent unit, and see the visual sound

indicators light up.

Note

• When the parent unit displays NOT LINKED and flashes, move the parent unit closer to the baby unit

(observe the minimum distance of 6.5 feet/ 2 meters).

Tip

• Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the

baby unit.

Positioning the baby monitor

Caution

• Keep the baby units out of the reach of your baby. Never place or mount the baby units inside the

baby’s crib or playpen.

1. Place the baby units more than 3 feet (1 meter) away from your baby.

2. Place the parent unit more than 6.5 feet (2 meters) away from the baby unit.

2

Before use

> 3ft (1m)

1

>

6.5ft (2m)

6.5ft (2m)

<

2

3

Using the baby monitor

Power on or off the baby unit

• Press POWER to power on the baby unit. The power light turns on.

• Press and hold POWER to power off the baby unit. The power

light turns off.

Power on or off the parent unit

• Press and hold POWER to power on the parent unit. The screen turns on.

• Press and hold POWER again to power off the parent unit. The

screen turns off.

Note

• The parent unit powers on automatically once it is connected to power

socket or battery installed. The baby unit also powers on automatically once

connected to power socket.

Adjust the speaker volume for baby unit

• Press VOLUME or VOLUME on the baby unit at any time.

Note

• The speaker of baby unit cannot be muted.

Adjust the speaker volume for parent unit

You can adjust the speaker volume from VOLUME 1 to VOLUME 5, or turn it off. The speaker

volume is preset to VOLUME 3.

• Press or when the parent unit is not in use.

When the speaker volume is set to VOLUME OFF, the screen displays .

Adjust the sound sensitivity of the baby unit

You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed

a certain level. You can use the parent unit to adjust the microphone sensitivity of your baby

unit. The higher the sensitivity level, the more sensitive the baby unit is in detecting sounds for

transmitting to the parent unit. The VOX sensitivity level is preset to HIGHEST.

VOX

Sensitivity

level

Highest High Medium Low Lowest

Description

The parent

unit speaker

is constantly

on, and you

will hear

all sounds

(including

background

noises) from

your baby’s

room.

The parent

unit speaker

turns on for

soft babbling

and louder

sounds from

your baby. It

remains quiet

when your

baby sleeps

soundly.

The parent

unit speaker

turns on

for loud

babbling

and louder

sounds from

your baby. It

remains quiet

when your

baby makes

soft sounds.

The parent

unit speaker

turns on

for crying

and louder

sounds from

your baby. It

remains quiet

when your

baby makes

soft sounds.

The parent

unit speaker

turns on for

loud crying

or screeching

sounds from

your baby. It

remains quiet

when your

baby makes

soft sounds.

1. Press when the parent unit is not in use.

2. Press SELECT to select VOX LEVEL.

3. Press or to choose the desired sensitivity level.

4. Press SELECT to confirm your selection. The screen displays SAVED and you hear a

confirmation tone.

Note

• To enter the VOX Level menu of the parent unit, the baby unit must be turned on.

Sound alert

If you want the parent unit alerts you with sound, especially when the baby unit detects loud

sounds, you can turn on the sound alert feature. This feature is preset to OFF.

Once this feature is on, is shown on LCD display. When the visual sound indicator hits

the red light range, i.e. the baby unit detects loud sounds, your parent unit beeps and

flashes.

1. Press when the parent unit is not in use.

2. Press or to choose SOUND ALERT, then press SELECT.

3. Press or to choose ON or OFF.

4. Press SELECT to confirm your selection. The screen displays SAVED and you hear a

confirmation tone.

Note

• The sound alert setting on each parent unit is independent.

Vibration alert

You can set your parent unit to vibrate and alert you, whenever the baby unit detects loud

sounds. This feature is preset to OFF.

Once this feature is on, is shown on LCD display. When the visual sound indicator hits the red

light range, i.e. the baby unit detects loud sounds, your parent unit vibrates and flashes.

1. Press when the parent unit is not in use.

2. Press or to choose VIBE ALERT, then press SELECT.

3. Press or to choose ON or OFF.

4. Press SELECT to confirm your selection. The screen displays SAVED and you hear a

confirmation tone.

Notes

• Each time you set the vibration alert to ON, the parent unit vibrates briefly after you press SELECT.

• The vibration alert setting on each parent unit is independent.

Turn on or off the glow-on-ceiling night light

You can turn on the glow-on-ceiling night light on the baby

unit. The baby unit projects a starry night scene onto the ceiling.

When the glow-on-ceiling night light is turned on, displays

on the parent unit screen.

Turn on/off the night light using the baby unit:

1. Press to turn on the night light.

2. Press again to turn off the night light.

Turn on/off the night light using the parent unit:

1. Press when the parent unit is not in use.

2. Press or to choose NIGHTLIGHT, then press SELECT.

3. Press or to choose ON or OFF.

4. Press SELECT to confirm your selection. The screen displays SAVED and you hear

a confirmation tone.

Notes

• The night light on baby unit operates even when the parent unit battery is out of charge or has been turned off.

• If the parent unit lost link, the night light icon on its LCD display will disappear, regardless of the night light

status.

Language

You can select a language (English, Spanish or French) to be used in all screen displays. The

language is preset to English.

1. Press when the parent unit is not in use.

2. Press or to choose LANGUAGE, then press SELECT.

3. Press or to choose ENGLISH, ESPANOL, or FRANCAIS.

4. Press SELECT to confirm your selection. The screen displays SAVED and you hear

a confirmation tone.

Note

• The language setting on each parent unit is independent.

Audio Reminder

With audio reminder feature preset to ON, the parent unit plays an audio reminder

when it is connected to a baby unit. It reminds you to place the baby unit at least 3 feet (1

meter) away from your baby, and keep the cords out of the reach of children.

1. Press when the parent unit is not in use.

2. Press or to choose REMINDER, then press SELECT.

3. Press or to choose ON or OFF.

4. Press SELECT to confirm your selection, and you hear a confirmation tone.

Notes

• You can press or to adjust the volume when the parent unit is playing the reminder.

• If the speaker volume of the parent unit is turned off, it will change to the default volume level when the

parent unit plays the reminder.

Set default

Use this feature to restore to the default settings. Restoring the default settings on one

parent unit will also reset the shared settings for VOX sensitivity level of the other parent unit.

1. Press when the parent unit is not in use.

2. Press or to choose SET DEFAULT, then press SELECT.

3. Press or to choose YES or NO.

4. When you choose YES, press SELECT to confirm your selection, and you hear a

confirmation tone.

-OR-

When you choose NO, press SELECT to confirm your selection. The screen displays the

previous menu.

Talk to the baby unit

You can broadcast messages from a parent unit to the baby unit and the other parent unit. If

you have two parent units, you can use both of them at the same time to talk to the baby unit.

1. Press and hold TALK on the side of the parent unit. The screen displays TALK when the

voice connection to the baby unit is made.

2. Speak towards the MIC on the parent unit. Your voice is broadcast to the baby unit

and the other parent unit.

Notes

• If you have two parent units, and you use one of them to talk to your baby, your voice will be

broadcast to both the baby unit and the other parent unit. The other parent unit displays TALKBACK.

However, no sound will transmit from the baby unit to any parent unit during broadcasting.

• If speaker volume of the parent unit has been turned off before the talk, it will change to default

volume level after the talk finished.

3

Using the baby monitor (Con’t)

Frequency control Crystal controlled PLL synthesizer

Transmit frequency Baby unit: 1921.536-1928.448 MHz

Parent unit: 1921.536-1928.448 MHz

Channels 5

LCD 35 (x) x 21.2 (y) mm B&W LCD

Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary

according to environmental conditions at the time of use.

Power requirement Parent unit: 2.4 V Ni-MH battery

Baby unit power adapter:

Output: 6V DC 400mA

Parent unit power adapter:

Output: 6V DC 400mA

Technical specifications

Specifications are subject to change without notice.

© 2018 VTech Communications, Inc.

All rights reserved. 11/18. TM8212-X_CIB_V2

Document order number: 91-011543-020-100

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Vtech TM8212-2 Babyfoon. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Vtech. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Vtech TM8212-2 Babyfoon in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Vtech Babyfoons
Meer handleidingen voor Babyfoons

Veelgestelde vragen over Vtech TM8212-2 Babyfoon

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Vtech VM303 Babyfoon

Handleiding

Vtech BM4300 Babyfoon

Handleiding

Vtech VM333 Babyfoon

Handleiding

Vtech VM5251 Babyfoon

Handleiding

Vtech BM2500 Babyfoon

Handleiding

Vtech DM221 Babyfoon

Handleiding

Vtech VM310-13 Babyfoon

Handleiding

Vtech VM3261-2 Babyfoon

Gerelateerde categorieën