Handleiding Waring Commercial MX1500XTS Blender

Handleiding

4 5

GROUNDING INSTRUCTIONS

• Foryourprotection,Waring

®

blenders are equipped with a 3-conductor

cordset having a molded 3-prong grounding-type plug, and should be

used in combination with a properly connected grounding-type outlet as

showninFigureA.Ifagrounding-typeoutletisnotavailable,anadapter,

asshowninFigureB,maybeusedtoenablea2-slotwalloutlettobe

used with a 3-prong plug.*

 AsshowninFigureC,theadaptermustbegroundedbyattachingits

grounding lug under the screw of the outlet cover plate.

 CAUTION:Beforeusinganadapter,itmustbedeterminedthatthe

outletcoverplatescrewisproperlygrounded.Ifindoubt,consulta

licensed electrician.

Never use an adapter unless you are sure it is properly grounded.

*NOTE: Use of an adapter is not permitted in Canada.

NOTE: User-installed cord set plugs are not permitted in Europe.

MX1300XTX/MX1300XTP/MX1300XTS & MX1500XTX/MX1500XTP/MX1500XTS

BLENDER SPECIFICATIONS

•Capacity:64oz.WorkingCapacity(48oz.capacitywithMX1300XTP&

MX1500XTP versions)

•SwitchSettings:Reprogrammable

•VariableMotorSpeed:Minimum3,000RPMs/Maximum20,000RPMs

(30,000 RPM with Pulse)

•Rating:120Volts-13.0Amps

•BaseMaterial:Polycarbonate

•PolycarbonateSoundEnclosureincludedwithMX1500XTX/MX1500XTP/

MX1500XTS versions only

•Bearing:HighPrecisionBallBearing

•Cord:6-FootThree-ConductorGroundCorewithStrainReliefinBase

•OverallHeight:21Inches

• OperatingCycle:1minuteON/3minutesOFF

•Weight:18lbs

•cETLu s ,NSFlisted

OPERATION

 1. PlugthepowercordintoACoutlet.PresstheOn/Off

button to

turn the unit on. The blue LCD backlight will turn on and the words

WARINGCOMMERCIALwillappear,indicatingthatthepowerison.

After 5 seconds, the blender enters standby mode.

NOTE:Instandbymode,theblenderisawaitingdirectionsandwillread

PRESSANYBUTTONTOBLEND.

2. The motor speed can be adjusted by pressing the or Speed

buttons. Speed ranges from 15% to 100%.

100% 20,000 RPMs

50% 10,000 RPMs

15% 3,000 RPMs

The Speed Up button will increase the motor speed display in 1%

increments and the Speed Down button will decrease the motor

speeddisplayin1%increments.Holdingdowneitherbuttonwillquickly

scroll through speeds.

Using the Speed Up and Speed Down buttons, set desired motor

speed.Ifnospeedisselected,motorwilldefaultto100%.

NOTE:ThemotordoesnotrunatthenewlysetspeeduntiltheStart/

Stop

buttonispressed.IfStart/Stop

button is not pressed

within5seconds,thenewspeedsettingwillbestoredfornextuseand

the blender will return to standby mode; the display will once again read

PRESSANYBUTTONTOBLEND.

 3. PressStart/Stop

buttontoturntheblenderon.Blenderwillrun

continuously at the set speed. The LCD will display the motor speed in

percentage. Default speed (percentage) is at 100%. Motor speed can be

changed while blender is running by simply pressing Speed Up

or

Speed Down button.

 4. Tostopcontinuousblendingoperation,pressStart/Stop

button or

press any of the program buttons.

PULSE FEATURES

Your unit comes equipped with two Pulse options: Normal Pulse

and

MaximumPulse

. Note: The Pulse buttons are momentary switches –

once released, the unit will shut off.

 1. TouseMaxpulseoption,pressthe button. This will run the motor

at 150% speed. The LCD will read MAX PULSE SPEED: 150%.

2. To use Normal pulse option, press the

button. This will run the motor

at100%speed.TheLCDwillreadNORMPULSESPEED:100%.

3. The blender allows you to set the pulse to your desired speed. While

blending at Normal pulse speed, the motor can be adjusted. To do this,

hold the

Pulse button and press Speed Up or Speed Down

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Waring Commercial MX1500XTS Blender. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Waring Commercial. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Waring Commercial MX1500XTS Blender in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Waring Commercial Blenders
Meer handleidingen voor Blenders

Veelgestelde vragen over Waring Commercial MX1500XTS Blender

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Waring Commercial TBB175 Blender

Handleiding

Waring Commercial MX1300XTX Blender

Handleiding

Waring Commercial BB155 Blender

Handleiding

Waring Commercial MX1500XTP Blender

Handleiding

Waring Commercial MX1050XTS Blender

Handleiding

Waring Commercial MX1100XTS Blender

Handleiding

Waring Commercial MX1100XTX Blender

Handleiding

Waring Commercial MX1000XTP Blender

Gerelateerde categorieën