Handleiding Waring Commercial MX1500XTS Blender

Handleiding

6 7

button to adjust the blending speed. The LCD will show the setting

speed and motor speed will change.

  NOTE:Thespeedcanbesetfrom15%to100%.Oncethe

Pulse

button is released, the motor will shut off and the blender will to return

to standby mode. The changed pulse speed will be stored in memory to

replace the default speed at 100%.

REPROGRAMMABLE STATIONS

 1. Thereare4ProgramButtonsforfourreprogrammablebeveragestations

for easy operation and consistent results. The factory-set stations are

programmed as listed below:

Liquid drinks

Frozendrinks

Icecreamdrinks

Smoothies

2. To run any of the above preset programs, blender must be in

standby mode.

3. Press desired Program button to start the blender. The motor will run at

the pre-set speed within the preset blending time. The LCD will show time

remaining.Oncetheblendercountsdownto0,themotorwillstop

running and the blender will return to standby mode and prompt

PRESSANYBUTTONTOBLEND.

NOTE:Toterminateablendingprogram,simplypressStart/Stop

button or any of the program buttons. After doing this, the blender will

returntostandbymodeandLCDwillpromptPRESSANYBUTTON

TOBLEND.

REPROGRAMMING BEVERAGE STATIONS

Users can add 4 new programs to meet their needs. A program can

consist of several sections, each with a different speed and running time.

Forexample,

can be replaced with a new program that has 3 sections,

as shown below:

Section 1: speed = 75%, time = 30 seconds

Section 2: speed = 100%, time = 20 seconds

Section 3: speed = 50%, time = 20 seconds

The program has the following limitations:

Speed: 15% to 100%

Time: 5 to 90 seconds

 Totalrunningtimeinaprogramcannotexceed90seconds,i.e.,sum

of the Sections cannot be longer than 90 seconds.

NOTE: The

buttonwillactastheenterkeytoproceedtonextstep

during the reprogramming process.

1. To enter new program, press both Speed Up

and Speed Down

buttons simultaneously while unit is in standby mode. The blender will

enter new programming mode and the LCD will prompt ADD NEW

PROGRAM.

 2. Next,youwillneedtosetvalues.PresstheProgrambuttonyouwant

toreplace(i.e.,1...4).TheLCDwillpromptUSEUP/DOWNTOSET

SPEED: 25%.

NOTE: 25% is the default speed setting in the reprogramming mode.

3. Press Speed Up

or Speed Down button to set the speed value.

The increment is 1% (150 RPMs). Press and hold the button to quickly

scroll through speeds. The speed can be set between 15% and 100%.

 4. Oncerequiredspeedisreached,press

button or wait 5 seconds

toconfirmsetting.TheLCDwillnowpromptUSEUP/DOWNTOSET

TIME5.NOTE:Fivesecondsisthedefaulttimesettinginthe

reprogramming mode.

5. Use Speed Up or Speed Down button to set the time value (up

to90seconds).Oncethe90secondsisreached,pressingSpeedUp

willnotincreasethevalueandtheLCDwillpromptMEMORYLIMITfor

2 seconds.

6. Press button or wait 5 seconds to confirm the setting. When the

blendingtimeisconfirmed,theLCDwillpromptSELECTANOTHER

SPEED. Repeat steps 3-5 if additional processing is needed.

NOTE: When pressing Speed Up

or Speed Down buttons to set

speedfornextsection,theLCDwillpromptUSEUP&DOWNTOSET

SPEED: 25%.

7. To save the new program settings, press both Speed Up and Speed

Down buttonssimultaneously.TheLCDwillpromptNEWPROGRAM

(PROG#)SAVEDfor5seconds.Theblenderwillreturntostandbymode

andtheLCDwillpromptPRESSANYBUTTONTOBLEND.

NOTE:Ifnobuttonispressedfor60secondswhenpromptedtoADD

NEWPROGRAM,theblenderwillexitnewprogrammingmodeandwill

return to standby mode. The new program will not be stored.

 8. Torunnewprograms,simplypressthedesiredProgrambuttonandthe

blender will run the program set by the user. The LCD will display NEW

PROGRAM#andwillcountdownthesettime.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Waring Commercial MX1500XTS Blender. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Waring Commercial. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Waring Commercial MX1500XTS Blender in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Waring Commercial Blenders
Meer handleidingen voor Blenders

Veelgestelde vragen over Waring Commercial MX1500XTS Blender

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Waring Commercial TBB160 Blender

Handleiding

Waring Commercial MX1000XTS Blender

Handleiding

Waring Commercial MX1050XTS Blender

Handleiding

Waring Commercial BB320 Blender

Handleiding

Waring Commercial MMB150E/K Blender

Handleiding

Waring Commercial MX1500XTX Blender

Handleiding

Waring Commercial MX1200XTS Blender

Handleiding

Waring Commercial MX1100XTS Blender

Gerelateerde categorieën