Handleiding Yuwell YT-1 Thermometer

Handleiding

01 03 0402

●Power source: DC 3V( 2 Section 7 alkaline

batteries)

●Measurement range: 32.0℃ ～43.0℃

●Display resolution: 0.1℃

●Measurement accuracy: ±0.2℃ in the range of

35.0℃～42.0℃

±0.3℃in the range of 32.0℃～34.9℃ and 42.1℃～

43.0℃

●Electric shock protection: the device is supplied by

internal power

●Applied part: BF Type

●Running mode: continuous running

●Temperature units: ℃/℉

●Degrees of protection against ingress liquid: IP20

(solid foreign matter whose diameter are greater than

or equal to 12.5mm can be prevented from entering,

no protection against ingress liquid )

●Safety classification: the device that cannot be used

in the presence of flammable anesthetic gases mixed

with air or oxygen or nitrous oxide

●Product size: 149×38×42(mm)

●Product weight:about 68g (not including cell)

This product complies with the Electromagnetic

Compatibility (EMC) standard for safe operation of

electrical equipment for medical use and

YY0505-2012.

The standard of YY0505-2012 (item 6.8.2.201)

stipulates that users should be provided with detailed

information related to EMC environment for safe

operation of equipment. And the following is the

description of technical instructions related to EMC.

(For details, please refer to YY0505-2012.)

The Electromagnetic Compatibility (EMC) standard

represented by YY0505 set a criterion for the safe

operation of electrical equipment for medical use.

The standard stipulates that the interference of the

noise generated by the equipment to other devices

should be controlled within a certain range, so is the

electromagnetic wave dry disturbance emitted by

other devices (mobile phones, etc.) .

1. Definition of EMC (electromagnetic compatibility)

EMC refers to the ability to satisfy the following two

requirements.

●No unallowable electromagnetic interference noise

will be emitted to other nearby electronic devices.

(Radiation)

●The device can work normally in the

electromagnetic environment with noise and other

interference from other electronic devices. (Noise

immunity)

2. Technical specification on EMC (electromagnetic

compatibility)

Electrical equipment for medical use requires specific

instructions for EMC and should be operated in

accordance with the following EMC information .

● This device requires special instructions on

electromagnetic compatibility (EMC). Please use the

device in accordance with the EMC information

described in this manual.

● Portable and wireless radio frequency (RF)

communication devices may affect the device.

●When using this device, do not place it adjacent to

or stack it with other devices.

11.The Use of Electromagnetic Environment

Guidance

1. The measurement result is only for reference,

which is not a substitute for a physician's diagnosis. It

is very dangerous to self-judge and treat only based

on the measurement result. Please follow the

doctor's instructions.

2. Please put the battery out of the reach of children,

otherwise it is dangerous.

3. When the product is not used for a long time (more

than 3 months), remove the battery from device to

prevent the battery leakage.

4. It is forbidden to immerse the infrared thermometer

in any liquid, and It is forbidden to use it for a long time

under too high or low temperature condition. No

collisions, drops and mixing with sharp objects.

5. Do not put the battery close to the fire or into the fire

to avoid the battery explosion. Do not use the battery

when it leaks or molds; when discarding batteries or

this product, it should be following local regulations to

avoid contamination.

6. This product contains sensitive electronic

components, should avoid strong electromagnetic

interference.

7. Please read this instruction carefully before use to

confirm that the battery is installed.

8. Do not disassemble, repair or remould this device,

which may lead to measurement error or machine

malfunction.

9. This product is not waterproof and should be used

carefully to prevent liquid from entering the product.

When the product gets wet due to contact with steam,

use after it become dry or gently wipe with a soft dry

cloth or cotton ball, otherwise it will cause

measurement errors.

●measurement environment:

8. Measurement and transport storage

environment

●Installing the battery

The device is supplied with 2

Section 7 alkaline batteries. Push

the battery cover downward and

load the battery into the battery

compartment. At this time, the

device will start self-inspection.

Pay attention to the positive and

negative poles instruction in the

5. Installation and usage

AAA

AAA

●This device is used to measure the body

temperature by passively sensing infrared heat

radiation collected from the human body's

forehead, which can be used for families and

medical departments to measure the body

temperature .

●Intended use and application scope: This device

is used to measure the forehead temperature of the

human body, which is applicable to infants, children

and adults.

●Contraindication: None.

2. Device structure and composition

1. Device use and applicant scope

Symbols Implication

Type BF application part

Electronic information product pollution

control mark environmental protection

use period is 10 years. Consumables

are not included

Caution! Consult instruction of product

Paper recycling

This side up

Fragile

Non-rainproof

●LCD area

●Appendix：

Instructions, Quick Operation Guide, 2 Section 7

Alkaline Batteries.

6. Product maintance and upkeep method

As the product is reusable device, please pay

attention to cleaning and disinfection after use.

If the product is dirty, please keep the sensor and

probe cavity clean, otherwise the measurement

accuracy will be affected.

How to clean sensor and probe cavity:gently wipe the

inner cavity or sensor mirror with a clean soft cloth or

Phenomenon

of breakdown

The measurement

temperature is lower

than 32℃, which is

beyond the

measurement range

Please re-measure

following the

product instruction

The measurement

temperature is

higher than 43℃,

which is beyond the

measurement range

Change the cell

No

display or

abnormal

display

The positive and

negative poles of the

cell are reversed or the

device is abnormal

7. Common failures and troubleshooting

methods

Please measure

under the 16℃~35℃

environment

temperature

The

screen

display

" "

The

screen

display

" "

The screen

display

" "

The power of cell is

shortage

Re-install the cell, or

contact the dealer

The environment

temperature is too

high or too low

Please

re-measure

following the

product instruction

9. Product technical parameters

05 06 07

Not to be disposed of as ordinary waste

The

screen

display

" "

10. Warranty card

Warranty card

Product name:

Infrared thermometer

Model:

YT-1

●Device main structure and composition

The thermometer consists of a housing, a sensor, a

display, and a circuit board.

4. Matters need attention

3. The symbols related to safety requirements

in this device and their meanings:

●Measure temperature of human body

1.Point the infrared thermometer probe at the center

of eyebrow, within 0-5cm of the forehead (do not

touch the forehead directly).

2.Press the Start measuring button “ ”. After

about 1 second, the infrared thermometer will have

vibration and sound prompts to display the

measurement results.

Notes:

①When the measurement

distance is more than

about 5 cm, the word "0-5"

will be displayed on the

screen, please close to the

subject, as the picture

shown at right;

②When the measurement distance is less than

about 5 cm, the device will automatically measure,

after the measurement, it will vibrate and have "di"

sound, and measurement result will be displayed.

③When temperature is 37.6 ℃ or higher, the device

will make quick continuous three-time "di-di-di"alarm

sound.

④when the measured result is beyond device

measurement range (32 ℃~43 ℃), thermometer will

make quick continuous three-time "di-di-di" alarm

sound, please make sure the measurement method

and the external environment is normal at this time.

[close to the

measurement indication]

●Sound on/off setting

When the prompt on/off button slides to " ", the

sound is off;

When the prompt on/off button slides to " ", the

sound is on.

●Power off

① Long press Starting measurement button" " for

3~5 seconds to turn off the device;

②In the absence of any operation, the device will

automatically shut down after about 30 seconds.

Possible cause

Troubleshooting

methods

temperature

probe

ranging

probe

power on

measurement

button

prompt tone

key

battery

cover

LCD display

area

battery

reminder

distance unit

temperature unit

mute prompt

distance prompt

result display

10. If there is temperature difference compared

environment of the device storage with that of the

measuring environment, place the device in the

measuring environment for more than 30 minutes,

otherwise there may be error for the measurement

result.

11. When lens of sensor becomes dirty, please wipe

it gently with a soft dry cloth or cotton swab. Do not

wipe it with other material, otherwise it may cause

lens surface of senor abrasion or machine

malfunction.

12. Do not try to measure when the device is wet,

which may cause measurement results inaccurate.

13. Before measurement, please make sure that

there is no sweat, cosmetics or oil stains on the

forehead of subject.

14. Before measuring, please make sure that the

subject does not take a bath, exercise or have a meal

within 30 minutes, and the body is measured at a

steady state.

15. Before use, please keep sensor and cavities

clean.

16. During measurement, do not let the subject

directly face the air outlet of the sun, air conditioner or

heater, which will change the temperature of the

forehead. Please conduct measurement in a stable

environment as far as possible.

17. Under the condition which meets the requirement

of storage, the usage period of the device is 5

years(fragile and consumable parts are not included).

●Setting measure unit

In the shutdown state, long press the staring

measuring button “ ”for 10 seconds to enter the

temperature unit conversion state, and then short

press the staring measuring butto“ ” to select

“ ”and“ ”temperature unit.

battery compartment and cover the battery cover.

Refer to the picuture at right:

cotton swab.

Disinfection of the product and its head: Gently wipe

the surface of the product and the head used for

measurement with a cotton swab dipped in a little

medical alcohol (70%), it can be used until the alcohol

has completely evaporated.

●Precaution for storage

This product should be stored in a dust-free, dry

place, please avoid direct sunlight; do not store in

places with high temperature, humidity, dust and

corrosive gas.

This product is a high-precision device, please do not

drop the device! Avoid drastic collisionsand jolts and

other adverse possibilities for transport.

If the probe or the product itself has been damaged,

do not continue to use it. Please do not use this

product for any purposes other than its intended use.

When it is used for children, please observe the

general safety precautions.

Environment temperature: 16℃～35℃

Relative humidity: ≤85%(RH)

Atmospheric pressure: 70kPa～106kPa

●Transportation and storage environment:

Environment temperature: -20℃～+55℃

Relative humidity: ≤85%(RH)

Atmospheric pressure: 70kPa～106kPa

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je Yuwell YT-1 Thermometer. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met Yuwell. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van Yuwell YT-1 Thermometer in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor Yuwell Thermometers
Meer handleidingen voor Thermometers

Veelgestelde vragen over Yuwell YT-1 Thermometer

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.

Gerelateerde producten

Handleiding

Yuwell YHT-102 Thermometer

Handleiding

Bodyform TH2001F Thermometer

Handleiding

Homedics TIE-240 Thermometer

Handleiding

Laica BF2095 Thermometer

Handleiding

Innoliving INN-017 Thermometer

Handleiding

Fysic FT-38 Thermometer

Handleiding

Plusmed plusSCAN Thermometer

Handleiding

Beurer OT 20 Thermometer

Gerelateerde categorieën