Handleiding ZTE AC30 Mobiele telefoon

Handleiding

Indicator Status Description

Battery

indication

RED glittering Please charge

RED bright Voltage of battery is low

Green glittering Charging

Green bright Voltage of battery is high

LED off No battery.

Signal

strength

indication

Red bright

ERROR or NO signal or NO

network service or NO SIM

GREEN glittering Signal is ok

Green bright Signal is good

LED off Low power mode

Wi-Fi

indication

LED off

WIFI is inactive or low power

mode

BLUE bright WPS is active

Blue bright Wi-Fi is active

Network

indication

RED glittering 2G Modem data transferring

RED bright Register on 2G network

GREEN glittering 3G Modem data transferring

GREEN bright Register on 3G network

LED off

ERROR or NO signal or NO

network service or NO SIM

Notes:

* The battery LED will be GREEN bright once the battery is fully

charged when power on.

* The battery LED will be turn off once the battery is fully charged

when power off.

1

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057 Tel: +86-755-26779999

URL: http://www.zte.com.cn E-mail: [email protected]

ZTE AC30

Quick Start Guide

2 4 5 6 73 8

LEGAL INFORMATION

Copyright © 2011 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated

or utilized in any form or by any means, electronic or mechanical,

including photocopying and microfilm, without the prior written

permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to

make modications on print errors or update specications without prior

notice.

Version No.: R1.0

Edition Time: July-2011

Manual No.: 079584503492

9

Introduction

ZTE AC30 is a 3G/2G mobile hotspot device, working in CDMA/1X/

EVDO network. The client devices could connect to it via USB or Wi-Fi

interface. The device supports data and SMS services, enabling you to

communicate anytime and anywhere.

This quick guide provides instructions on how to install and get started

with the product. For information about connection of services, please

consult your service provider.

Specication

Data Service

CDMA EVDO: DL 3.1 Mbps

UL 1.8 Mbps

Weight 80 g

Dimensions (W×H×D): 99.7 mm*53.7 mm*13.9 mm

Power Adapter +5V (DC), 0.7 A Max

Battery 1500 mAh

*Standby time 100 hours

*Working time 4 hours

Operate system

Windows 7, Windows Vista, Windows XP (SP2 or

later), MAC 10.4 or later

Web Browser

Windows 7, Windows Vista (64bit or 32bit),

Windows XP (SP2 and later), MAC (10.4 later)

Notes:

The device’s standby and working time are only for your reference, and

based on ideal working environment.

Switching On/Off Your Device

Press and hold the Power Key for three seconds to switch the device

on or off.

When you turn the device on, the signal icon is lit.

Charging Your Device

Notes:

• Charge at least 5 hours to ensure a full initial charge.

• Charging is only possible within a temperature range of 0°C to 45°C.

1. Connect the Mini USB end of the AC wall charger to the Mini USB

port on the device.

2. Plug the other end of the AC wall charger into the appropriate

electrical outlet.

Working Mode

Your device supports three working modes. For the client, we only use

PC or laptop as the example in this document.

USB Mode: Connect to the device with the USB cable.

Wi-Fi Mode: Connect to the device via Wi-Fi.

Mixed Mode: Connect to the device with the above two connection

methods.

Notes:

If you want to connect to the Internet by using Wi-Fi mode, make sure

that the client supports the Wi-Fi function.

The following picture is the application example. All of the client devices

can surf on the Internet at the same time.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for

your reference. The actual device may be different.

Interface and Buttons

1. Power

Hold the Power button to switch on/off the

device

2. Indicator It indicates your device’s status.

3. Charger/USB port

•

Charge your device

•

Connect the client to your device via USB

cable

Notes:

* Continuously press the Power button ve times within 5 seconds,

the device will restart automatically and restore to the factory

default settings.

LED Indicator

It indicates the status of your device.

Hardware Installation

Inserting (U)SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery

cover.

2. Insert (U)SIM Card into the slot.

Warning:

Please power off the device and remove the external power adapter

before removing or inserting the (U)SIM card, if not, the device or (U)SIM

card may be damaged.

3. Insert the battery as shown with the contacts located against the

gold springs.

4. Press the battery down ush into the case.

5. Once the battery is secure, place the battery cover back on the

device until it locks into place.

Establishing a Connection Between Your Device and the Client

Via USB Cable

1. Connect your device and the client with the USB cable.

2. Power on your device.

3. Follow the system prompts to complete the software installation:

Notes:

• If the system does not launch installation automatically, you can run

the installation program in path of My Computer > Mobile Hotspot

> AutoRun.exe.

• The driver of your device will be installed at the same time.

4. After the installation, the system will create a shortcut icon on

your desktop and a Mobile Hotspot program group in the Start

> Programs menu. The connection between your device and the

client will be established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize,

and then Wi-Fi LED is blinking.

2. Use your normal Wi-Fi application on the client to search the

available wireless network.

Notes:

You need to check your Wireless

Network Connection. Set the

client to obtain an IP address

automatically in the Internet

protocol (TCP/IP) properties, and

the client will get an IP address

like “192.168.0.100”.

3. Sele c t th e SSID of y o ur

d e v i c e , a n d th e n c l i c k

Connect.

Beoordeling

Meer over deze handleiding

We begrijpen dat het prettig is om een papieren handleiding te hebben voor je ZTE AC30 Mobiele telefoon. Je kunt de handleiding bij ons altijd downloaden en daarna zelf printen. Indien je graag een originele handleiding wilt hebben, raden we je aan contact op te nemen met ZTE. Zij kunnen wellicht nog voorzien in een originele handleiding. Zoek je de handleiding van ZTE AC30 Mobiele telefoon in een andere taal? Kies op de homepage je taal naar keuze en zoek daarna op het modelnummer om te zien of we deze beschikbaar hebben.

Specificaties

Alle handleidingen voor ZTE Mobiele telefoons
Meer handleidingen voor Mobiele telefoons

Veelgestelde vragen over ZTE AC30 Mobiele telefoon

Ons supportteam zoekt dagelijks naar nuttige productinformatie en antwoorden op veelgestelde vragen. Als er onverhoopt toch een onjuistheid tussen onze veelgestelde vragen staat, laat het ons dan weten via het contactformulier.